Firefox suddenly stopped, impression, give error messages now

Similar Questions

• After upgrading RAM, computer stops and gives error when restarting: "DISK BOOT FAILURE, INSERT SYSTEM DISK".

  Original title : OFFICE XP STOPS (MESSAGE of ERROR)

  I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE.       > WHAT AM I DOING WRONG

  Hello

  You can view these methods:

  Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.

  Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.

  At the recovery console command line, type:

  Chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information, see:

  How to perform disk error checking in Windows XP

  Chkdsk

• Firefox suddenly stopped from asking me if I want my user name and saved passwords. Help, please!

  Firefox suddenly stopped from asking me if I want my user name and saved passwords. Help, please!

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.com/kb/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.
  • https://support.Mozilla.com/kb/make-Firefox-remember-usernames-and-passwords
  • https://support.Mozilla.com/kb/username+and+password+not+remembered

• I tried to send an email in Colombia and I got an 0x800CCC79 error message now when I try to send anything this message appears

  I tried to send an email in Colombia and I got an 0x800CCC79 error message now when I try to send anything this message appears.

  The message cannot be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'gzdaher@gmail '. 'Hi', account: ' pop - server.wi.rr.com', server: ' smtp - server.wi.rr.com', Protocol: SMTP, server response: 450 4.1.8 - field of the recipient is not resolved [R0309001]', Port: 25, secure (SSL): no, Server error: 450, error number: 0x800CCC79.
  How can I get rid of him?
  Lori

  'gzdaher@gmail '.

   
  This isn't a complete address. Add the ".com" and see it go.
   
  E-mail address is removed from the privacy *. 

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• Firefox suddenly stopped opening 'in a new window"when I ask-open"in a new tab"only

  For the last two days, Firefox has suddenly stopped opening in a new window; Now, I can never have a window open at a time (even though she always let me open several tabs).
  Tried everything down and rebooting not closing of course, but made no difference.
  Don't have no knowledge of changing parameters - I changed or damaged something without knowing?
  The only news I did recently, is download the add-on from the EPUB reader! Is there a link?

  Thanks a lot for your suggestions

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Lightroom cc 2015 the trial gives error messages when opening

  Hey, I just installed the cc of Lightroom 2015 of the trial, but it does not open. It gives two error messages: 1) an internal error has occurred. (2) an error occurred when attempting to change modules. I went on various forums and support pages. Many of them say to rename the files or something like that, but I can't find these files on my mac. And there are so many suggestions that I don't know that one to listen to.

  Hi danwildmind,

  This problem normally occurs when the files of Adobe to launch Lightroom do not have read/write permissions.

  Please follow this article changing the error modules and grant permissions to required files

  Here's a double thread Lightroom: "an error occurred when attempting to change modules."

  Now that you have gone though the resolution of the problems already

  You must make sure that Adobe files have read/write khakis.

  Follow the steps below to: -.

  • Go to ~/library/Application Support/Adobe = User Library directory [ not to be missed ~ symbol ]
  • Also, go to the folder /library/ Application Support / Adobe = system library
  • When you open GetInfo option for Adobe folder.
  • Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write access to prevent these issues in the future.

  Important:

  • Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.
  • Make sure you click on the gear icon and select apply to closed.
  • Lock dialog box and close the Get Info .
  • So that all files present in the Adobe folder will have read and write access.

  

  Let us know if this helps

  ~ Assani

• When I boot FireFox on the Mac, the error message 'well, it's embarrassing... ' appears view full page on the Tools menu.

  When I boot FireFox for Mac (OS x 10.6.8), the error message 'well, it's embarrassing... ' back to PAGE VIEW covering the menu, tools, docking station, office,. Clicking on a 2 error message options 'restoration' or 'close' doesn't work. Since I can't access options menu under the eyes (and pressing 'ESC' does not display page, my only option is to force quit FireFox. I downloaded a cool FF program, but the same thing happens. How can I fix when I can't access the menu or tools, etc. ?
  PS. I'm going to use Safari to send this message.

  Well, it's boring.

  On Mac, command + shift + f should toggle the display between the ordinary and full screen. Does it work?

  If you can still access the menu bar, one of the Firefox settings file may be damaged. Try this, assuming you have the main toolbar:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • type or paste everything: in the address bar and press enter/return

  In the first table of the page, click on the button 'show in Finder '. This should start a new window listing the files and the folders.

  Leave this window open, switch back to Firefox and output:

  • "3-bar" menu button > button "power".

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Instaverse gives error message does not open

  When I try to open InstaVerse, I get an error message reading "access violation at address 005BEC46 in module InstaVerse.exe.
  Read of address 00000024 "

  It seems you have a problem with Instaverse, not Firefox. This is one side of Firefox Help. Having a problem with Mozilla Firefox, we can help you?

• Equium A60: XP blue screen of death: Stop: c000021a - fatal error message

  "Stop: c000021a {fatal system error} the Session manager initialization system.
  ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000). The system has been shut down. »

  This is the message I get on a blue screen. I can't start the computer. His tent to restart conineously after this error message. What could be wrong someone can help.

  my system is equium A60, running on windows xp sp2 installed very recently.

  Thanks in advance.

  You should check the support microsoft help you dosent his good companion
  This, you should get started http://support.microsoft.com/kb/317189

• Internet Explorer gives error messages

  I continue to say that Windows Internet Explorer cannot find my requested Web sites. They appear then leaving me to close the error message.

  How can I stop this happening?

  Your laptop is connected to the LAN or WLAN? Sorry, but this sentence doesn't explain anything relevant. How to understand your problem correctly?

  This means that you do not see some some pages?

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.