FireSight and ISE User Identity Integration

Similar Questions

• AnyConnect FireSight through ISE user

  Hello!

  We installed the ISE 2.1 for AAA process for users VPN to ASA5545x. AnyConnect users authenticate successfully and you can see the username within newspaper at ISE. Also we have modules of firepower in the ASA and the virtual appliance FireSight 6.1. How we can use ISE as a source of identity for FireSight?

  Inspect traffic to the power of fire based on groups of users, or a user.

  Thanks for the help.

  Hello Serge, you can certainly do that by integrating both via PxGrid.

  Thank you for evaluating useful messages!

• CDA Firesight and

  Hello

  Can someone help me with a question of configuration related to the ADC and the consumer as an ASA?

  I have a server Firesight all Setup very well, I'm working on a problem with the ADC, information of the SAA.  ASA configuration in particular, is there a necessary config on the SAA to operate with ADC in order to capture intellectual property mappings?

  Thank you

  Ben

  CDA does not interact with FireSIGHT / firepower. Identity of the user at the center of power of fire management is collected via a user policy and Sourcefire User Agent (SFUA).

  CDA works with firewall identity ASA features and the module of ASA CX now interrupted.

• The Developer Portal and internal users

  Hello

  I have configured on our ISE to use AD-users as sponsors. And it works perfectly.

  but I also try to set up an internal user to the portal of the sponsor.

  I've configured almost the same so I don't understand why the LSE reports:
  Authentication of the sponsor has failed: not found for the user Sponsorgroup

  My identity store is a sequence of the my and internal users and I can see from the log it looks like the right place:

  Identity store:

  Internal users

  My condition is that the internal user, must be a member of the group identity: sponsorAllAccount

  my home group:

  Group membership:

  SponsorAllAccount

  and then get a group created promoter, this grop of sponsor which is allocated to the State, works very well for det AD-users.

  Evaluate the politics of identity

  5435 sponsor authentication failed

  any suggestions why?    I now use the lastes 1.1.1 version.

  BR

  Tuva

  Yes,

  For your internal groups use the condition of group identity preconfigured on the left.

  I don't know why there is an option on the left, he has not worked for me either in the authorization policies.

  Thank you

  Sent by Cisco Support technique iPad App

• The ISE - user not found internal user authentication failed

  Salvation of the Forumers

  I try to make wireless 802. 1 x, where the identity store using the internal users.

  But I got this error message when I try to connect

  Authentication failed                                                                                 :

  22056 object was not found in the identity of the point of sale

  My authrorization rules is built like that

  identity groups = user identity group / "mygroup".

  condition = no setting

  Permissions = standard / PermitAccess

  Question 1

  Any troubleshooting step to do about it?

  Question 2

  For authorization rules, what is the condition put to use internal user as the identity store?

  Thank you

  Noel

  The error is due to an authentication failure and is not a problem with authorization

  You must watch your authentication (policy-> authentications) and see what storage of identity has been authenticated against

  Moreover can do authentications Live page (monitor-> authentications) and to record failure, click the icon under details. This will give you details of the request processing and you can see what rule was accompanied in the politics of identity (matching political identity rule) and "banks chosen identity.

• ISE with AD integration fails

  Dear,

  I'm trying to join the ISE with our announcement without success, below the error recorded in the ISE:

  Description of error: could not find the domain controller, verify network connectivity

  Support details...

  Name of the error: LW_ERROR_FAILED_FIND_DC

  Error code: 40049

  Detailed log:

  Error description:

  Could not find the domain controller in domain 10.10.10.10: there is no domain in DNS

  Resolution of the error:

  Please make sure that your DNS contains records of field: 10.10.10.10, for more information please see the AD DNS diagnostic tools

  Join the steps:

  13:51:40 to join the field 10.10.10.10 user ise help

  13:51:40 searching for DC area 10.10.10.10

  13:51:40 could not find domain controller in the domain 10.10.10.10: there is no domain in DNS

  Even if we have valid records for both AD and ISE in the DNS, I'm able to resolve the DNS name of our AD when NSlookup to EHT.

  I don't know what the problem is?

  Impatience on your part.

  Kind regards

  Muhannad

  Hello

  First of all, your dns can answer srv request by sending the IP address of the AD? You set the ntp on AD and ISE?

  What ISE version do you use? Do you have applied the latest patches?

  When all of these steps were soon, you took a few traces to the ISE?

  On ISE to check your dns server, you can run the following command:

  Nslookup _ldap._tcp.dc._msdcs. AD. Querytype srv FIELD

  Replace AD. OF your AD real domain name, and then paste your result.

  After obtaining this information, otherwise still works, you must make a few tracks at the ISE. If you do not know how, let me know I'll try to make a screenshot on my lab to give a guideline.

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem

• Firefox not to honor the "Offline Web content and data user" settings

  Firefox still accept web content offline and the user data, I have never any notification regardless of the 'tell me when a website asks to store data for use in offline mode' parameter (in preferences > advanced > network).

  I also completely erased all: permissions tab regardless of the "all sites > offline storage" storage offline implementation is always allowed.

  Here is one - step by step to reproduce my problem.
  1. make sure all: permissions is clear
  2 make sure that the list to: Preferences > network > "the following Web sites are..." "is that clear
  3. close the preferences window
  4 go to go to http://appcachefacts.info/demo/ ... No notification about the offline cache will appear.
  5. open the preferences, the list of preferences > network > "the following Web sites are..." »
  Will fill up now with http://appcachefacts.info (1.1 MB)

  This article list persists even after closing the browser window and re - open.
  This happens with a total disregard for the settings described in the first paragraph.

  I found a related question, but it's old and archived:
  https://support.Mozilla.org/he/questions/981189

  Firefox will store small amounts (less than 50 MB) of data without asking permission.

  • offline - apps.allow_by_default; true
  • offline - apps.quota.warn; 51200

  You can switch the pref in offline mode - apps.allow_by_default to false to make Firefox ask.

• Using a control of the chain with the Enter key, return * and * allowing repeated identical entry

  Hi all

  There must be a simple solution for this, but it's Friday afternoon, and my brain is not cooperating.

  I create a simple terminal through which a user can interact with an instrument. My question is about the only query string control. The button send and the Terminal Table are here for reference.

  

  Here is my desired behavior:

  (a) the user types a command in the field of the query, tape input or return. An event is triggered, and the request is sent to the instrument. The focus remains on the field in the query.

  (b) with any other action the interface user, the user types Enter or return again and again, by triggering an event that sends the request to the instrument every time Enter or return is typed. The focus remains on the field in the query.

  Here's what I have:

  

  This allows for one), but fails to b). The reason is, because the value of the field in the query has not changed, change value event does not fire when the user starts to spam keys enter or return. There is a way around this, as suggested by this post. Here is the solution in a few words:

  

  Instead of looking for the change in the value of the query command, the event fires for each key event to the bottom of the control and resembles a pressure of enter key or return. What attracts the user action, even if the content of the field of the request have not changed. The problem with this approach is that, when this event fires, I need to read the value of the query string order and send it to the instrument, but the value I get via the local Variable query is the old value, probably because the key down event fires before the value of query is saved as changed. Is there a way to programatically "enter" the contents of the control channel so it is recorded as a change in value, until I have the question via a local Variable? Is there a different way I should go about it? I'd rather not do anything that bound the input keys or return to this particular area, since I have many other UI elements that need these keys in my program.

  If not, is there a way to make the control of the fire 'Change of value' query string event when the user presses enter or return even if the value has not changed?

  Thank you for your comments!

  I thought about it.

  (1) control of the string (query) a value of update while typing.

  (2) save the key event down to the control of the chain. If the entry or return was pressed, send the state machine to the State 'send request '.

  

  (3) in the application 'send' State read control channel via the local Variable value.

  

  This is the desired behavior to allow the user repeatedly hit entry or return to regularly send a command, and the user can also type in a new order and send it by pressing enter or return.

  Thanks to all who have helped me this something to think about!

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Device and the user does not add security to the family account

  First post.

  Win8 running on a laptop. He was previously a partner in a family safety account, that I had put in place. I removed the unit and the user to try to resolve a problem with a web page. However, the account will now add the user or the device back to when clicking on many user form accounts for managing issues online.

  Family safety account is under my email address. laptop user is my child, who is defined as a child with a separate e-mail account. The security account for the family is still working and control another portable under win7 under a separate connection.

  Help!

  I managed to solve my problem.

  I created a new administrator account on the laptop under different parents email address.

  Logged in under that account, I was able to edit on behalf of a child who then it adds the new parental control under the new e-mail address of the parent.

  Only problem I have now is a child under a security account for the parental family and one under the other, but I can live with that...

  Steve

• Error "C:\Documents and settings\user\mydownlaods\ < download the file > is not found" after downloading a file.

  Original title: download problems

  After that I downloaded a file, it is deleted when I try to open it. I get an error that says C:\Documents and settings\user\mydownlaods\than the name of download, cannot be found.when I look in my download file, it shows the download as being deleted. Any ideas?  FF

  Welcome back, checks and please uncheck all responses as answered, this way among the other contributors will see the question and perhaps a few other ideas.

  Thank you

  EDIT:

  other things that could cause this problem:

  1.

  IE open in "no Add-ons" mode To do than go to start > all programs > Accessories > system tools > "Internet Explorer (No Add-ons). If you can download the software now, it suggests then there's a bad addition affecting the browser.

  2.

  Sometimes the index.dat file may be damaged. In this case, you will need to delete the index.dat file and restart your computer. Then, you will be able to upload files properly again. Follow the steps below to delete this file.

  (1) open Internet Explorer.

  2) click on tools, click on Internet Options

  (3) on the tab general, under temporary Internet files, click on delete files

  4) click Ok when asked if you want to remove the files

  (5) by the historical section under the general tab, click clear history, and then click Ok

  (6) close Internet Explorer

  (7) logout the current user and log on to another user as administrator account

  (8) click on start, run

  (9) type CMD and press ENTER to open a command prompt

  (10) replace the directories in the Temporary Internet Files directory by typing the following command, substituting the word by the user username and the correct drive letter in Windows XP.

  CD drive: \Documents and Settings\nom of utilisateur\Local Settings\Temporary Internet Files\Content.IE5

  Example: cd c:\Documents and Settings\Mark\Local Settings\Temporary Internet Files\Content.IE5

  (11) type del index.dat and press enter

  (12) type Exit and press ENTER to close the command prompt

  (13) restart your computer

  Once the computer has been restarted, open a web page with a link to a download. Click on the link and try to download the file. It should work now.

  Written by Mark Hasting

  3. http://support.microsoft.com/kb/932823?ppud=4&wa=wsignin1.0

• Somehow my windows xp C:\Documents and Settings\Users\Local Settings\Temp folder to store all the files inside?

  Somehow my windows xp C:\Documents and Settings\Users\Local Settings\Temp Dungeon folder all files inside that has occupied almost all of my computer hard disk free space. I thought that it will remove al temporary files or folders automatically?

  My hard drive has 700 MB of free space suddenly dropped to 24MB

  I don't have any software and hardware change? When I turned on my computer running windows xp to pop a dialog box in the taskbar saying that my hard drive is running out of free space. After checking the problem, I discovered this Dungeon C:\Documents and Settings\Users\Local Settings\Temp folder, all files inside that occupied almost everything my computer hard drive free space.

  I thought that the temp folder automatically clean the cache file and the folder after some days, can someone tell me why temp folder stores all the files and folder used almost all the free space from my hard drive?

  Here's what JoseIbarra aka aka aka ElderL A.User I thought.

  See if this sounds like your situation:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/my-temp-folder-keeps-on-filling-up-continuously/7cc7f919-bd7e-475c-abd2-adf5560581e7

• Error Client Services for NetWare has disabled the Welcome screen and fast user, any change by changing the account settings

  Original title: "Client Services for NetWare."

  When I try to change my account settings, I get this message "client for NetWare has disabled the display of welcome and Fast User Switching.

  To restore these features, you must uninstall Client Services for Netware ".»

  I checked and the customer service is not installed on this computer.

  He puts this message up no matter what I try.

  What can I do to remove this problem?

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Error message when you try to turn on welcome screen or Fast User Switching

  http://support.Microsoft.com/kb/315347

• Screen saver turns on (Windows XP SP3) and lock the computer and the user cannot log back with their credentials without administrative rights

  When the screen saver is used and the user returns to open a session.

  they get...

  This workstation is in use and has been locked.
  The workstation can only be unlocked by user123 or an administrator.
  Press CTRL + ALT + DELETE to unlock this workstation.

  user123 cannot log back in. unless he made a system admin an administrator connections or user must reboot the machine to reconnect.

  Hello

  -Is the computer connected to a network domain?

  Please follow the steps mentioned below and get back to us with the results.

  Cannot lock a "locked" computer administrator.

  http://support.Microsoft.com/kb/242917

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the link below.

  Information about unlocking a workstation

  http://support.Microsoft.com/kb/281250

  If the computer is connected to a domain, I suggest you to post your questions in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope that helps!

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW