Firewall was turned off while I installed El Capitan on start-up level

Similar Questions

• Get the message: do not unplug or turn off your computer-install updates 1 of 10

  Original title: closing

  For the past 10 times, I stopped, the message "don't disconnect or turn off your computer-install updates 1 of 10" or other similar term. What is c?

  Hi bloviater,

  1. the updates you are trying to install?

  If you are unable to enter the Normal Mode, then try Safe Mode system restore.

  Method 1:

  Step 1:

  You can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you can start in safe mode, then try a system restore to a previous point where you have not experienced the problem.

  Note: When you do the system restore to restore the computer to a previous state, programs

  and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  When you are able to boot into normal mode, try the following steps.

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my intranet connection was turned off the coast how I turn it back on?

  my intranet connection was turned off the coast how I turn it back on? (or my wireless connection)  I tried to click the wifi icon but it just says that it is not connected.

  Hi karmahome,

  Follow these steps:

  1. click on the button "Start" and then click on the "Control Panel" icon in the start menu.

  2. click on the link "switch to category view" in the left pane of the Control Panel window if the window is not already assigned to the category view. You will see the 'network connections' icon in the right pane. Double-click this icon to open the network connections window.

  3 right-click on the icon of the adapter wireless network in the network connections window, then click the "Properties" link in the context menu. This opens the wireless network connection control panel.

  4. click on the "wireless networks" tab in the wireless network connection control panel. Check the box 'use Windows to configure my wireless network'.

  5. click on the 'OK' button in the wireless network connection control panel.

  For reference:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Woke up and my computer was turned off

  Added 2 GB of memory to my Windows Vista program, also added an external hardrive, the idea was to keep the free memory on the computer and use the 2 TB external hardrive to store files IE. music, photos and documents etc everything was beautiful then all of a sudden I woke up one morning and my computer was turned off, I checked and tried everything but he wouldn't come, crashed my computer, and if so can it be saved and how do I do this?

  Hello LisaBrookes525

  Thank you for your comments.

  Just before you cart the machine to a technician try to change the fuse in the plug on the main power cable to the PC. Your machine is completely dead it may be something as simple as a fuse.

  Another option could be the PSU (Power Supply Unit) inside the PC

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to enable my PC to turn off automatically after a specific time to start?

  * Original title: automatic shutdown of PC

  How do I leave my PC to turn off automatically after a precise moment to start... for example I want my PC runs after 1 hr or 1.5 hours from the moment that it is turned on... Not the tyme specifi c 1-02:00 closed... that not one, but the one i asked

  Hello

  This might interest you:

  http://Lifehacker.com/5831504/how-can-i-start-and-shut-down-my-computer-automatically-every-morning

  Read the second half of the Section Windows.

  See you soon.

• help my macbook pro retina 13inch started itself and turned off while in the case

  as the title, my Macbook pro retina (bought in 2014) is transformed and then turn off 5 minutes later while in his case today, I only noticed after reviewing the event log and seeing a start and stop.  How can this happen? the Mac was definitely off not asleep and I did not put a timer.

  It is unusual for a Mac to act this way, but this is not the first time that I heard about what's going on.

  It looks like a problem SMC and is easily fixed by a reset see here reset management system (SCM) controller on your Mac - Apple Support this will most likely solve the problem.

  If this isn't the case, then it could be a simple sticky switch?

  A visit to a Genius Bar is perhaps a good idea if the SMC reset does not work for you, and a new OSX installation did not help.

• Firewall XP turns off

  My firewall is disabled

  Hi HalJohnson,
   
  -Have you installed any third-party antivirus on your computer application?
   
  Method 1: One-third of security software (antivirus application) will have their own firewall. This can turn off Windows Firewall.
   
  Therefore, if you have installed a third-party security software, disable the same thing at the moment and see if the problem still occurs.
   

  Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. The firewall can keep the computer worm, pirates, etc.. So, be sure to activate security/firewall software once you are finished with the test.

  Method 2: Scan your computer for virus or malware with any antivirus application.

  If you do not use any antivirus application, use the Microsoft Safety Scanner to do the same thing.

• Mouse touch arc randomly turns off while remaining "arc 'd" even when I'm in the middle of something

  I had this Arc Touch mouse, because first, they came out, and blue laser under him also shut down, in the middle of me using it every day since then my mouse will turn off without warning or error. Sometimes it happens every 30 minutes, other times it will last hours before doing so. And I know for a fact that it is not the batteries this. It of a feature I don't know or is this defective mouse. In addition, can solve this problem - I don't want just go buy a new mouse.

  I have a problem with Windows 7 and Windows 8 previews, and I tried different computers, different usb ports, etc..

  I have not tried on XP or Vista, but I doubt it would all of a sudden work on these operating systems

  If this scenario resembles the mouse is defective, can be directed to the where can I send it in a replacement?

  Thanks for any help

  Hello

  Step 1:

  You can try to download the latest version of the driver from the website of the manufacturer for the mouse and install the same thing to check if it works:

  Reference links:

  http://www.Microsoft.com/hardware/en-us/p/arc-touch-mouse#details

  http://www.Microsoft.com/hardware/en-us/p/arc-touch-mouse#support

   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2:

  If the above fails, try the following.

  It seems to be a hardware problem. You can contact Microsoft support hardware support.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  You can check out the following link and check:

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  Let us know if it helps!

• My blackberry curve blackBerry smartphones turns off while I use it

  OK, I was on my phone and I had a question about something so I went to the browser and typed in www.google.com and then it started to load and then just turned off and returned. I thought that it was just this site but I have tried other sites and it does the same thing. Help, please!

  Batteries can fail in different ways, with different symptoms. Must show a load, but not be able to provide the necessary power under load. This is what I suspect in your case - battery is simply respond to demand for the phone, but the extra power needed for browser, screen and so on cannot be provided and unit turns off.

  Also, execution of the lithium batteries at the bottom constantly is hard on them. They do better when they are upgraded frequently.

  I think you need a new battery. Try to load before he gets to 20% and recharged during the night when you sleep.

• Updated FF, stuck computer had to turn off the computer and now will not start.

  Toshiba Satellite PC running Windows 7.

  Received message there was an update for Firefox. Manually, clicked on it. After restarting the computer (as shown), I clicked on the Firefox shortcut icon and the Office froze. CTRL/Alt/Delete didn't work - nothing worked so forced the laptop turns off, press and hold the power button until it did.
  WAITED a few minutes and then turned the monitor never came to top - just stayed black. After a second attempt, that the computer turns on, the keyboard lights up but screen stays black. NO.
  problems before trying to update to Firefox.

  I write this on my Mac, as there's no way to use the PC with a black screen.

  Have you checked that the monitor is connected correctly and that all cables are connected entirely?

• My lap top guard turn off while I'm on it thought it was the battery but not what it could be

  It maintains close its self off I have a virus, no battery issues I don't know

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

• Satellite L655 - Windows Defender presents Kaspersky firewall as turned off

  With active Kaspersky, does anyone know why the Defender shows firewall Kaspersky Internet Security Inc. as off?

  Apart from turning notifications off the coast, try to activate Kaspersky via Windows Defender is not possible.

  Hey,.

  Hmm as far as I know only security software must be running. This means that if you installed Kaspersky Security software you must disable Windows Defender completely. Some security software publishers recommend it.

  Don't worry: security software just so that you can disable Windows Defender.

  Alternative request in the Kaspersky forum to get help. I think that this question has nothing to do with Toshiba ;)

• Why my Windows Firewall keep turn off briefly?

  I just launched a recovery on Pavilion Media Center TV m7470n desktop my father, which has restored XP Media Edition 2005 SP2. I then installed SP3 and use Windows Update to get the latest updates. The system now works fine, but from time to time, I get a popup notification that says that the Windows Firewall is disabled. The popup balloon quickly and when I enter the Security Center Windows Firewall appears as on. I did a full scan with Microsoft Security Essentials and I also tried Trend Micro HouseCall and RootkitBuster. None of the scans showed no threat, but I'm still uncomfortable with the ball of myesterious to appear several times a day. Someone saw?

  Now, I think the HP software that updates the computer was responsible. I tried to get the updates by running the software myself, but he says there is no update available. After a day or two, however, he popped up and told me that several updates were waiting to be installed. After you install the updates from HP, the problem with the Windows Firewall stopped.

• Firewall Windows turning off on its own

  The last two times I turned on my computer, I got a warning that the windows firewall is disabled.  I had my computer for more than a year, and this issue just started to happen.  It is a Dell laptop running windows 7 with Avira Internet Security installed.  Why is that happening and how can I solve this problem?

  Try this procedure:--

  (1) right click on my computer if you use one admin
  (2) select Manage
  (3) then click on Device Manager
  (4) then go to the menu bar click on 'View' and then click on view devices
  (5) then go to the menu bar and click on 'View', then select 'connection device.
  (6) then scroll last and search for "windows firewall authorization driver."
  (7) right click on it and select 'Properties', then click on the driver tab
  (8) see if stopped status click on the Start button and then also select type automatic
  (9) if the State is started, then click on the drop-down Type menu and select Auto
  Reboot your system.

• Laptop turns off while doing a restore on an installation of Vista OS; Displays a command prompt

  Okay, so to explain, I tried to fix my laptop all day, and I am REALLY frustrated right now. First of all, it is even dvd player does not work for some reason, so I but hey, maybe I can get a (an i'm going to probably won't even get help for saying this, but I'll do everything to set) iso. I do it, it's the installation goes well and everything, and then it stops. I turn the thing back roller, then it stops again! So I turn on again thinking that it should be fine, I'll just restore it once more and go just doing nothing until tomorrow, because I got all these windows problems 7 is already leading me because of this crappy bug that screws with the battery. When I try to roll back, it is therefore display a command prompt with X:$Windows.~BT\Windows\system32 window. I'm honestly about to _ just cry because I spent all day trying to solve something and instead my laptop goes right down. I seriously No. CLUE on what to do. Help, please.

  Yes, I know that I used an iso, what can do you will not help me, but please I need to know what to do.

  Hello

  The line of the command prompt indicates that it is thanks in part to a facility, likely from the .iso file you downloaded. Partly the problem from that that the installer has no way to mount a file .iso on the hard disk without loading an operating system that includes support for the execution of a (usually a virtual CD drive) .iso image. Thus, installation does not end because it cannot locate the drive that contains the necessary information. Now, you're stuck with a partial installation and no way to move back and forward.

  At this point, there are a regular install disc and a scanner to work. With laptops, it is best to use disks to restore / installation provided by the manufacturer the nature of one of their facilities. If your camera allows, you may be able to get away with a removable external disk to complete the installation, but you need to replace the internal drive not working in both cases.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org