First 7.0 problem of frame size!

Similar Questions

• First Elements 9 - output video does not not in the source frame size

  I am using first Elements 9. My source of the layer film is 1080i 1920 x 1080. During the edition I have no problems at all, all lines upward. The video is 38 minutes. I use the SHARING option and the subset of the COMPUTER, with a custom preset to export for a bandwidth limited distribution of data (< 800 Kbps). The end result is a 38 minutes long video that's a little more than 150MB in size. He reads very well, quality is what I expected it to be for this size, but here's the question...

  There are 2 black vertical stripes on the right and left edges of playback. The original video is very good, these bands are actually add on. The edition size of the image and the export frame size is 640 x 360, which I believe is close to the default size of youtube. It feels like the exported video allows more like 720 x 360, and to compensate for this loss of space, it makes the area on the left and right of the video, that when editing, has been hidden. So what we get is this "behind the scenes" areas where I can see titles fly in and out that normally you shouldn't see, etc..

  In addition, some images were objects that are part of the schedule, shifted to the right or left by almost 100px.

  That's where I'm looking for any help / suggestions you have.

  Thank you

  To make sure that I'm following correctly, you are importing 1920 x 1080 videos with square pixels, BY - 1.0, in a 640 x 360 project, with a NORMAL non-recognition. Is this correct?

  The edition size of the image and the export frame size is 640 x 360, which I believe is close to the default size of youtube.

  How you handle the HD less than SD down-rezzing?

  Whence the image size of 640 x 360?

  Maybe I'm just confused, and something happens?

  Good luck

  Hunt

• Problems of frame - updates fail to install

  original title: problems of frame

  When downloading the Microsoft updates, everything installs fine except for the updates of the framework... I don't know if they are important or what.they do.
  I was told to uninstall all components of framework on my computer, and then reinstall., but this seems drastic.
  Can someone advise?

  Hi TerryShaw,

  The following article should help you troubleshoot setup of .net framework update issues.

  Fix the .NET Framework

• Beginner frame size question-new sequence is not what says PP

  I want to crop 30px from the bottom of a 576 x 352 movie. If only I could drag a marquee selection autour with a crop tool and save it would be perfect.

  All that I know to do is create a new sequence with the new frame size 576 x 322, then copy the old film in it. I have create a new sequence of Custom, and PP dialog box shows that it has the desired size (scrn bottom CAP), but it isn't... its actually much smaller and the most cultivated in all parts. When I copy in the 576 x 352 images in to the new sequence, the image size is not yet near. What I am doing wrong?

  PP CS6 mac

  

  

  The spacing in pixels between these two screens do not match... are the pixels of your film footage square pixels, or more narrow les.909? Make sure your settings to completely sequence corresponding to the size of the image file - and all other things except to change the dimension of height. So remember to slide images of this sequence, using 'set to the size of the image' and see if it works better.

  Neil

• Frame size

  How can I change the size of the frame? I want the gradient where the frame size is really small, IE for example. 72 dpi/inch.

  In other words, the midtones will be large and sparse.

  Are you confused with LPI PPI?

  To convert an image into one with a line screen effect, use the filter (with an open image):

  Filter > Pixelate > color halftone.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• Mixture of Framerates in first Pro CC - problem

  Hey guys, hopefully get you some advice for me,

  I've been on vacation and we had different cameras to record everything. Everything is shot in 1080 p but the framerate is different. GoPro stuff is shot at 60 p (for the ability to do a slow motion later), and my plans of GH3 is turned usually 50 p (same reason). I know that the errors I did by choosing the same display every time rate. But now I have the problem, that I want to do a project in first Pro CC where I use each item in the same sequence.

  I thought 25 p is the best choice, if I have the opportunity to play excerpts from 50 p in slow motion (with interpreted as 25 p). Can I just insert the 60 p clips? When I intepretate the 25 p clips, they are all, of course, idling. To make them 'direct movement' I must speed up to 220% or sth. Like this. Isn't that create the same problems?

  As you can see I'm a bit confused, if something could help me, really. Is it possible to use each clip in 'direct movement' and, if necessary, slow down some clips without having any problems with images/jump, stuttering and stuff like that?

  Alex

  In most cases, there is no need to interpret the film allows you to adjust the frame rate. First will adjust automatically for clips with different rates, as explained on this page for help: Help for Adobe Premiere Pro | Adding clips to sequences (a search on 'mixed frame rate' me, he got in a jiffy.)

  Here's the paragraph:

  Mixture of element types in a sequence

  You can mix clips with different rates, frame elongation and sizes of images in the same order. For example, if you drop an HD clip in a sequence in an SD project, the clip will be letter-boxed and scaled to the size of the SD image automatically. Similarly, if you drop a SD clip in a sequence of an HD project, the clip will be in pillar boxed automatically.

• Problem on the size of the screen.

  I write a custom screen named mylistscreen, get the data from the first screen and show it.

  In the first screen, there are a lot of buttons and an editfield. Click on the button or search editfield send data to mylistscreen. The data are different button and editfield.

  The problem is:

  in mylistscreen, I try this code: Dialog.alert (Integer.toString (Display.getHeight ()));

  This code cannot obtain the correct size in the storm Simulator

  But the blod Simulator will show the correct size

  Why?

  If you have compiled and packed your code using the version 4.7 or later (ie., 5.0) then you should get 480 as the result of Display.getHeight () call when the virtual keyboard was invisible (hide) in the model of storm

• Broadcasting subtitles/captions position changes after the backup. subtitle, first pro cc problem

  Hello

  I'm working on first pro CC 2015.3.

  I put subtitles on my support.

  I choose to put down to the center using the small box (with 9 positions) but when I save the file, subtitltes position change a bit and they are no more in the Center. Sometimes a small portion of the text is off the screen.

  THX (and sorry for my English)

  Hello

  I work on first pro 2015 cc.3

  I added sub titles on my video.

  I put some money down en title centered to the screen with the help of the box with 9 automatic positions.

  At the beginning it works and when I save and reopen the file, the sub titles have moved and are are shifted. Some of the text is even outside the screen.

  Thank you for your help.

  Hello

  I got the solution. It is resolution safe or secure portal.

  I put the solution if anyone ever need.

  Your captions or subtitles may not exceed your security door or gate ground track. You need to reduce the font size or move to another line to shorten. Because first changes automatically position if it s more limit.

  However, if you want to be on these limits (ground/door chest) you can set with the scale and the effect of the track position.

  Hello again I found the solution.

  Solution alone, I share you although I think qe I must be the only jerk for not thinking about it.

  The problem comes from the ground and safe door car first pro will automatically substitute the captioning at best pour in stay standards.

  Possible solutions

  -in the absence of strike reduced the size of the

  -make line breaks.

  -Play with the scale effect parameters and positions of the captioning.

• First Elements 10 problem!

  Hello! I have a problem with my first 10 elements. I'll post a photo to clearify the problem.

  So I try to make a video with lots of little video clips. All the clips are in the same format, mpeg. Almost all the files work correctly except for a few, and they are always the same, all tho of course with another video... As I see it seems to be completely random, some fail and some work... I have still the audio on each clip, but I get the green screen on some of them... And once a clip like that it stays that way... BTW, sorry if the English is bad... All my files are saved in a computer game, im using Nvidia Shadowplay. Someone met before, or has any idea what the cause? How can I solve this problem?

  And Yes by the way, I have 10 windows, I don't seem to matter when I had windows 8, same problem... I'm also a really good computer then has nothing to do with this... The computer can manage information, storage, all sizes of files etc... its young.

  Hope I can get a good answer on this basis, feels little sad to buy another program to fix it.

  Thank you very much for taking the time to read this hope for some pros of creation.

  Best regards, Rasmus

  Convert the mp4 with HandBrake contstant framerate and re-import.

• First 2015 bi - gpu dropped frames

  Can someone with dual GPU or mulitple tell me if they encounter problems reading a chronology of acceleration GPU with Prem 2015 on Windows 8.1? With my two nVidia 980Tis I get 1,000001 million dropped frames. With a released GPU, I get a perfect reading.

  I've been in contact with Adobe engineers, and they are not aware of any questions. I know that the 980Ti is not on the supported list, but with only a single installed things are fine. Whether it is a double thing 980Ti or both GPU would help a lot.

  Thank you

  Adobe Premiere Pro CC and GPU support |  First work Pro area

  Please note that first Pro CC has support for multiple GPU configurations to export (one is used for playback) to have more than one GPU will speed up your time to exit.

  If this article is correct, first will not use both for playback. You can try to set the nvidia Control Panel to set the first to use a card for cuda gtx. then use SOUL to return and let it use cuda with two gtx cards.

  Bill Gehrke has used several gpu, it might have some tips.

• How do I loop back to the first image of the last frame?

  Hello

  I am currently working on the framework for a product Viewer.

  I have:

  a clip called "viewer_mc", which contains the images taken from different angles of the product. The actionscript code generates a script on the last frame of which returns to frame 1.

  a button instance called "autoplay_btn", which plays in the music video of whatever the current image is and stops on image 1.

  a left and right button are used to move the clip from the film frame, to give the appearance that the product is running.

  I managed to make him:

  having the clip play through both, return to section 1 and stop.

  have functions return button when held down, move the image in the clip using nextFrame and prevFrame commands. Right-click successfully continues a loop round the frame 1 and continues operation to give the impression of rotation.

  The last problem I do experience becomes the left button to act accordingly, ranging from the first frame to the last and continues to operate.

  Here are my actionscript so far:

  import flash.events.MouseEvent;

  var lastFrame:Number = viewer_mc.totalFrames;

  var thisFrame:Number = viewer_mc.currentFrame;

  var backFrame:Number = viewer_mc.currentFrame - 1;

  1. This is the part that gets to play through once before returning to the first image. I think that maybe the problem which I am facing is because of the part "viewer_mc.addFrameScript (lastFrame-1, initially)", that is even if I am now the left button, returning to this script and therefor have bounced back immediately to the first frame. However, there is no flickering on the screen that you would expect if that were the case

  Note: as this is a viewer of generic product that I can use as a template I use lastFrame etc. as opposed to the entry of the value in

  function initially () {}

  viewer_mc.gotoAndStop (1);

  }

  viewer_mc.addFrameScript (lastFrame-1, initially);

  2. it is the functionality for the autoplay_btn that will play through a rotation / return the Viewer to the initial view (front) of the product (fig. 1).

  autoplay_btn.addEventListener (MouseEvent.MOUSE_DOWN, autoplay);

  function autoplay (ev:MouseEvent): void {}

  var startFrame:Number = viewer_mc.currentFrame;

  viewer_mc.gotoAndPlay (startFrame);

  };

  3. it is the right key functionality, which once held, moves the clip to the next section via the function "rotateRight" based on the order "nextFrame. It loops back rounded up to the first image due to the 'viewer_mc.addFrameScript (lastFrame-1, initially)"script generated on the last frame of the clip you want.

  right_btn.addEventListener (MouseEvent.MOUSE_DOWN, rightDown);

  function rightDown(e:Event) {}

  stage.addEventListener (MouseEvent.MOUSE_UP, stoprightDown); Wait for the mouse upward on the stage, in the case where the finger/mouse moved out of the button accidentally when they release.

  addEventListener (Event.ENTER_FRAME, rotateRight); While the mouse is down, run the function check once each image according to the frame rate of project

  }

  function stoprightDown(e:Event):void {}

  removeEventListener (Event.ENTER_FRAME, rotateRight);  stop the execution of the function check each image now that the mouse is in place

  stage.removeEventListener (MouseEvent.MOUSE_UP, stoprightDown); remove the mouse listener to the top

  }

  function rotateRight(e:Event):void {}

  viewer_mc.nextFrame ();

  }

  4. This is the feature of the left button, which once held, moves the clip on the framework of prev function «rotateRight' based on the «prevFrame» order And that's where the rub, because while it works to get the movieclip to frame 1, it loops round to the last image and continue to operate, as you want.

  left_btn.addEventListener (MouseEvent.MOUSE_DOWN, leftDown);

  function leftDown(e:Event) {}

  stage.addEventListener (MouseEvent.MOUSE_UP, stopleftDown); Wait for the mouse upward on the stage, in the case where the finger/mouse moved out of the button accidentally when they release.

  addEventListener (Event.ENTER_FRAME, rotateLeft); While the mouse is down, run the function check once each image according to the frame rate of project

  }

  function stopleftDown(e:Event):void {}

  removeEventListener (Event.ENTER_FRAME, rotateLeft);  stop the execution of the function check each image now that the mouse is in place

  stage.removeEventListener (MouseEvent.MOUSE_UP, stopleftDown); remove the mouse listener to the top

  }

  I guess that's probably my logic for this part that's really let me down - I can make a similar function in actionscript 2, but am trying to learn actionscript 3 just to evolve with the times in some way and a little hard. Again, this is only a few days!

  function rotateLeft(e:Event):void {}

  {if(thisFrame==1)}

  gotoAndStop(viewer_mc.totalFrames-1);

  } else {}

  viewer_mc.prevFrame ();

  }

  }

  Any help you can give me would be welcome. For an example of the effect I'm trying to achieve with the auto play button etc. I recommend:

  http://www.fender.com/basses/precision-bass/American-standard-precision-bass

  Here is a link to the file that I made using your code with the change, I have indicated to play the opposite.  See if it works as expected.  If so, try to see what is different in your.  If not, tell me what to do, it does not reach.

  http://www.nedwebs.com/Flash/AS3_loop_play.fla

• Batch-resizing problem still frames of time in the project overview

  Hello dear all,

  I had just now ask regular users of the Organization, a question to which I can not solve.

  Well, that's the first thing: I use Adobe CS5.5 body of my place of work. OS / Win7

  I intend to use the Organization to create a montage of time. I have all my shots right now and take advantage of adobe products to use the Pan & Scan of accompaniment with sequelae. What I can't do usually with QTpro...

  I imported my frames in my body, committed to 1frame calendar and works wonderfully.

  BUT, here it comes... in the right corner, you have that preview "program: sequence01 ' and my (PORTRAIT) photos must be resized: they do not enter the preview of the image.

  I already resized my photos in Photoshop as a batch process, but as Id like to create a Pan & Zoom effect in AfterEffect, so I need to keep a decent resolution larger than the 720 p from my movie.

  Now I can resize each frame separately with ease in the preview of the body so that the width and the object of my photos is just the frame, but is it impossible 'batch' resize by certain types of multiple choice in my calendar and then jump in the preview and manually resize them all at the same time?

  As said, same resizing in Photoshop is not a solution because my photos are in portrait mode, while the setting of the video is in 16:9 right?

  Please find an explicit illustration below, I try to explain this problem as clear as possible, hoping that I was understandable.

  I advance thank you very much, I expect your knowledge to teach me

  

  If you want to resize all the clips in your sequence based on a clip in your illustration, just copy the clip you resized, select all the clips in your sequence and choose Edition > paste attributes.

• Frame size variances in the project settings?

  Hi guys

  I have new information and some comments on my problems with get output full screen.

  I looked through all the parameters of the project, and I noticed that those that I tried to use...

  HD 1080i (60i) and HDV 1080i 30 say that the output is at a16 ratio 9 and have an image size of 1440 by 1080i.

  It's the size of the image or the ratio, I continued to try to import.

  Eventually, I realized that this isn't an image size that is proportional to the image report it lists.

  16 by 9 would be really proportional to 1 440 x 810.

  The 1 440 x 1080 video I import using one of these, exports not full screen even if it exported the same size, what about, i.e.1440 in and 1440 out.

  ------------------------------------------------------------------------------------------ ---------------------------------

  So, I looked through the project setting for a selection where the ratio indicated and the size of the frame matched.

  I found HDV 720p30.

  16 by 9 to a 1280 by 720 size.

  It would be a size easy for my work in.

  So I did a video on that size then it loaded in PE8 and it travels very well.

  Fullscreen without border. In fact it comes out full screen no matter what size I export it.

  When I exported the same video to 1600 by 900 it exported full-screen and went well.

  Then I went back and loaded the same 1280 x 720 video in 30 parameters of the HDV 1080i.

  It was also released in mode full-screen borderless.

  So the problem is that, as far as I can see the selection screen is wrong about the size of frame for the two HD 1080i and HDV 1080isettings.

  Really need to charge something to 1600 by 900 or proportional to.

  And like many I can find there is no setting that supports something else of the wide screen with the exception of the Standard 48 kHz settings.

  It seems that if you want to go to an image format widescreen 720 x 480 is the only option.

  Now I have to decide if I want to do future widescreen or are living with restrictions on the size of the image.

  I do not change horses in the middle of the stream so I can just stick with the smallest size for videos of Lucy but I'll do the other projects on the big screen.

  Thanks again for all the help.

  Mike

  Mike,

  As Steve, the two quantities are practically the same, with one exception: the IRON (pixel format). With 1920 x 1080, the format uses square, with a NORMAL pixels = 1.0. The 1440 x 1080 uses non-square pixels, with a NORMAL = 1.3333, so that they are larger, they are tal by a factor of 1/3.

  If you multiply 1440 x 1.3333, you will get very, very close to 1920.

  I don't know any standard video format, which is 1440 x 1080, but with square pixels, i.e. NORMAL = 1.0. It could be one, but it is not a standard, I know.

  When working in an animation, video screen-cap program or CAD program, it is very likely that they will work with square pixels, so that what they see on their computer screens, will be accurate, and the computer uses pixels square, where equal = 1.0.

  With HD material, I think that the only format using non square pixels is 1440 x 1080 anamorphic, detailed above. It is a bit of a hybrid, as non square pixels are gradually almost everywhere, from computer to HD TV screens.

  The use of non square pixels goes, as this was how things were designed for decades with the CRT, in NTSC and PAL televisions. Everything was then back 4:3 and 16:9 didn't talk, until right at the end of the CRT (they do not disappear completely, but probably soon). Then, set the 16:9 720 x 480 (NTSC) hit the HAND of basically of 0.9 to 1.2. The time that the SD widescreen has begun to take, the world began to go to the HD. As long as one makes a SD output, say DVD-videos, non square pixels will be with us. When the output formats are past, so I think that the 1440 x 1080 will also go the way of the dodo, and we're going to be standardized on square pixels. So, if we could only NTSC and PAL in order to, with respect to the FPS...

  Hope that helps,

  Hunt

• Problems of frame in CS4 rate

  I am a student and I use CS4 on Mac on one of the computers in the schools. One of the animation projects I've been working I have to animate a music video.

  To do this, I calculated on the TEMPO of the song and set the pace to 23.3 FPS while I have 20 pictures between beats. So just to give a Visual representation of when I placed a layer that is a red flashing for 2 images each 20 images starting on the first beat. With her, set up like that and I run the Flash animation, it keeps time correctly and works. However, when I test the video time is off. I tried to change frame rate to 60 fps as an arbitrary number to see if the frame rate setting was an effect of the test file, but when I tested the video at 60 fps it did not run any more quickly than before. I asked my teacher the problem but he doesn't know. I exported the video in MOV and SWF format, but it was still off.

  Anyone know how to fix this?

  Use a timer to show your dot so you can control his schedule with more precision.  However, the synchronization of audio and video in flash is only elementary to add sound to your timeline and assign a synchronization to 'stream '.

  Note: this is not the best way to use the sound in flash, but it's the only easy way to synchronize audio/visual.