Not found 1.2 OVA first Cisco infrastructure

Similar Questions

• First Cisco Infrastructure

  Hi all

  We used to have automated Action Syslog LMS 4.2 (according to syslog messages, it will trigger one of the script files). Now, we have migrated to first Infrastructure 2.0. Can you one please advise how I do the same thing in this?

  Thanks a lot for your answer.

  Hello

  With a prime Infrastructure, as of now, we have less characteristic on syslogs and automated action film support syslog is is not available at the moment.

  Thank you-

  Alya

  Ratings encourage contributors *.

• First Cisco infrastructure reinstall - license question

  Hello world

  Here's the scenario, the Cisco IP running is v1.1 (w/c at the moment is still called Cisco NCS (Network Control System) and unfortunately, she appeared.

  Re-Setup was planned and they want the latest version, w/c is 2.1 installed.

  Now, here are the questions:
  1. How can I transfer my license? Should I key PAK? If so, it will remain usable for the new Cisco PI?
  1.A. How can I do? I mean transfer the license?

  2. the devices not supported on the upgrade?

  It's quite deep-research question, I would say. I do research in fact the answer right now, but hope someone can help me :)
  I have a version of thread hard time considering that it's an old of it (and he even existed in the old name too!)

  Thank you! : D

  You can move your PI 2.1 license.  Email [email protected] / * /.

• First Page - error 404 - not found

  Hi all
  
  I started to learn the ADF recently, I created EO, VO, AM. My version of Jdev is 11.1.1.3.0.
  
  I tested with BC4J Tester, everything works fine.
  
  But when I create JSF page and say Run I get the following error in the browser explorerer.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  
  
  This is the first time I try to run the page. could someone let me know what are the decor, I need to do in order to look at my page.
  
  
  Thank you
  Kumar.

  So first make sure that the page is NOT under the web - inf (as correctly stated John) folder and the dragyour page, and then on the adfc file - config.Xml. The page gets recorded if all goes well.
  If you drag a new view of the component on the adfc palette - config.xml, give the view a name such as "TestMyApp" (don't let the end of the name to ".jspx"), create the page (double-click on the icon) and put something on the page.
  Then, you can change the properties of the project view controllers and select run/debug, select configuration default run and edit. Under 'launch settings' select the adfc-config. XML as a target, uncheck the 'attempt to run Active...'. "and now, select 'ADF task Flow' in the tree on the left side. Now, you select the newly created view TestMYApp and save your changes.
  When you now run the application using the run menu (or debug) order, your application starts with the selected page 'TestMyApp '.

  Timo

• The limit of the device must be less than or equal to the limit of life cycle license in first cisco 2.2

  Hi all

  I have seen under error in the tool main 2.2 Cisco infrastructure

  The limit of the device must be less or equal to the limit of license of life cycle and also secondary device ISE inaccessible since premium.

  Could you please suggest how we can solve your problem.

  Thanks in advance...

  Kind regards

  Sachin

  Yes. Life cycle license are by smart device managed. See this page for a good overview:

  http://www.Cisco.com/c/en/us/support/docs/cloud-systems-management/Prime...

  .. as well as this page:

  http://www.Cisco.com/c/en/us/products/collateral/cloud-systems-Managemen...

  .. who States:

  Life cycle license: allows access to all the features of the life cycle, which includes the configuration of the devices, image management software, basic health and performance monitoring, fault management, troubleshooting and customer visibility on the network. The license of the life cycle is based on the number of managed devices. Life cycle of the licenses are available in sizes from package of 25, 50, 100, 500, 1000, 2500, 5000, 10,000 and 15 000 devices and can be combined as needed to reach a total number of device under license.

  A device is uniquely identified through the assigned IP address and system object ID (SysOid). Routers, switches, light/unified access points and network first Cisco (NAMs) analysis Modules are charged on the number of licenses. If a switch stack is managed via a single IP address, it counts as a single device. A single frame will, however, be counted as multiple devices if the chassis is configured with several IP addresses. For example, a switch with several service cards, such as a firewall and so forth, or a stackable switch with an IP address assigned to each switch who is involved in the stack is considered multiple devices within the first Cisco Infrastructure. Cisco Wireless LAN controllers (WLCs), autonomous and peripheral access points third are not counted against the number of licenses.

  When you have more devices that licenses, you will receive the error see you and prevented from adding additional devices to your inventory.

  We see it more often when it is light (i.e. not independent) APs are added to a wireless controller. PI will not prevent the new APs to be added, they are managed under their association with the WLC. However, if you try to add a new switch it would prevent you to do until the deficit of licenses has been sent.

• LMS 3.2 (solaris 10) - user tracking: once again "ogs_server_urn" not found! Errors

  LMS 3.2 on a solaris 10 server that had problems with ctm_config.txt in the past (https://supportforums.cisco.com/thread/2033941) now once again has problems with the device Selector in UT. There are FATAL errors of type it below connected to CampusOGSServer.log:

  [Tue 19 Oct 18:27:22 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
  [Tue 19 Oct 18:30:52 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server
  [Tue 19 Oct 18:33:03 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
  [Tue 19 Oct 18:35:04 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/Pre-deployed
  [Tue 19 Oct 18:35:05 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/User Defined groups

  To create failure I'm going to UT > reports > generator-online Switch Port report > Switch Port summary
  The switch of the device that opens contains all devices and clicking the search button produces the following error:

  Problem with file /WEB-INF/screens/deviceselector/DeviceFilter.jsp! URN_NOT_FOUND: urn 'ogs_server_urn': not found!

  also, the following error is located in /opt/CSCOpx/MDC/tomcat/logs/stdout.log:

  October 18, 2010 14:18:49 org.apache.catalina.core.ApplicationDispatcher invoke

  SERIOUS: Servlet.service () for servlet jsp threw exception

  com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND: urn 'ogs_server_urn': not found!

  at com.cisco.nm.xms.ctm.client.CTMCall.establishIPC(CTMCall.java:238)

  to com.cisco.nm.xms.ctm.client.CTMCall. (CTMCall.java:218)

  to com.cisco.nm.xms.ctm.client.CTMClientProxy. (CTMClientProxy.java:64)

  at com.cisco.nm.xms.ctm.client.CTMClientProxy.getProxy(CTMClientProxy.java:180)

  at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:179)

  at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:98)

  to com.cisco.nm.xms.ogs.client.OGSServerProxy. (OGSServerProxy.java:85)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getServerProxy(OGSRuleExpressionUtil.java:102)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClassDefUtil(OGSRuleExpressionUtil.java:123)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getInternalClasses(OGSRuleExpressionUtil.java:153)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClasses(OGSRuleExpressionUtil.java:174)

  at org.apache.jsp.WEB_002dINF.screens.deviceselector.DeviceFilter_jsp._jspService(DeviceFilter_jsp.java:158)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

  at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:594)

  at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:506)

  at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)

  at org.apache.jasper.runtime.PageContextImpl.include(PageContextImpl.java:614)

  at com.cisco.nm.uii.taglib.framework.ContentAreaTag.doStartTag(ContentAreaTag.java:76)

  at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspx_meth_embu_contentarea_0(popup_jsp.java:876)

  at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspService(popup_jsp.java:693)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:470)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:405)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)

  at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)

  at com.cisco.nm.uii.UIIController.processActionForward(UIIController.java:380)

  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)

  at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)

  at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:199)

  at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:282)

  at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:754)

  at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:684)

  to org.apache.jk.common.ChannelSocket$ SocketConnection.runIt (ChannelSocket.java:876)

  to org.apache.tomcat.util.threads.ThreadPool$ ControlRunnable.run (ThreadPool.java:684)

  at java.lang.Thread.run(Thread.java:595)

  I checked the file ctm_config.txt in the directory campus and cmapps, removed the files ctmregistry and ctmregistry.backup from/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib, deleted all files and directories below/opt/CSCOpx/MDC/tomcat/work/Standalone/localhost/and restart the services.
  No change...

  What I noticed by looking directly in the database of the CMF is that "CampusOgsGroupCacheTable" is completely empty where the following tables contain data:
  CampusOgsGroupPropertiesTable
  CampusOGSTagTable
  CampusUserGroupAssociationTable

  What could be the reason for this behavior?

  I still thought of the option to export all groups of CMF (or at least groups of campus) and delete all tables of OGS and re-import the groups but when I try to do it I get the following error:

  [email protected] / * /-server #. / perl./OGSCli.sh u admin
  Enter the password for the CiscoWorks:
  Authentication succeeded.
  INFO: Type EXIT to exit from OGSCli guest at any time.
  Enter a task OGSCli [export]: export
  Enter a filename of export groups:./OGSGroupExport.info
  WARN: The details of the group in the selected file will be replaced by new groups of export information. Do you want to continue? (y/n) [n]: y
  Enter a name of group hierarchy defined by the user to export or the full export of all groups defined by the user of all of the applications [all]: all the
  INFO: Hierarchies of groups defined by the user in all the applications that are installed in all servers, will be exported to. / OGSGroupExport.info.
  Authorization succeeded.
  ERROR: Could not export the specified groups, user-defined hierarchies in. / OGSGroupExport.info.
  ERROR: This could be due to one or more of the following reasons:
  ERROR: * OGSServer process may not work
  ERROR: * remote server consolidation or Application may not be accessible
  ERROR: * lack perhaps of free disk space
  ERROR: * you do not have the required file permissions to create the file.
  ERROR: See /var/adm/CSCOpx/log/CMFOGSClient.log for more details.
  [email protected] / * /-server #. / perl./OGSCli.sh u admin d
  Enter the password for the CiscoWorks:
  Authentication failed.
  Check the username and password you entered.
  [email protected] / * /-server #.

  just to be sure, I download the 2 files ctm_config.txt...

  Instead of setting DYNAMIC_PORT_ALLOCATION = 0, replace perms on both ctm_config.txt 0444 files, use the original port and see if UT works.  If so, run in this configuration for some time see if corruption returns.  It should not since casuser won't be able to write to the file.

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• first error: load key not found ERROR 999 (on blue screen...)

  I don't know what I was doing before the crash. But I know that after a reboot, I walked back and saw the following on a BLACK screen:

  No operating system found

  After panic completely, I rebooted and got this:

  On the blue screen: "key of loading not found error 999 (STHIVE =).

  Everything I tried to do since that time is up to us as 1. Memory is intact, 2. Hard drive needs to be replaced.

  I've been it for 15 years, reformatted computers, can hardly pull most problems, if it does not know where to look for answers.  But I've never had a total system crash.  I would like to have more information.

  WHAT I TRIED: recovery of Microsoft: failure |  HP recovery: failed

  I tried both several times.  I went into the bios diagnostics for, and that's when I got the 10008 = hard code it had to be replaced and code 10000 = memory? intact or something like that.

  Please someone... I need at least, recover the files if possible and learn how to replace a hard drive and get one at a great price.  I'm barely making it on the invalidity of the social security (because of Lupus, fibromyalgia, Chronic Fatigue, Addisons, several chronic autoimmune problems).  Some days my only contact with people using a laptop in bed is human.  That's why my sister bought and I would pay for 2 years.  2 years increased in March.  Now his seven and he broke down. Photos, MP3 files, etc., some are saved on flash drives.  Recording to an external hard drive... but alas, never did.

  FYI - I don't have a recovery disc - that I can find.  I ordered a drive recovery Windows Vista from MS yesterday, but if the hard drive is shot, it does not, right?  I also have HP files, for my HP Pavilion Entertainment PC, laptop, dv6736nr model.  Number of files available for download, boot order changed to ensure he'd be first boot CD, but he always comes back "no windows operating system" instead of launching the cd.

  Also - I don't know how to get into the back.  I bought my first computer in 94, post back and therefore never really learned much about it.  I can't do certain things in the BACK?

  Thanking in advance anyone who might help!

  Kathie aka Tobebo

  (Tobe and Bo are my two service companion Lhassa Apso dogs)

  Hello

  First thing to do is to replace the hard drive because apparently there is no. Data currently on the disk can sometimes be recovered by a person with technical knowledge, but you must be willing to pay for the service. It can be quite expensive.

  Running recovery disks will be futile until the above is accomplished. You will find that you will need to replace the memory as well. Maybe your system experienced a power surge?

  There is nothing to do in the BACK like that no longer exists as an underlying layer for the Windows operating system, it expired with WinME 10 years. Vista, XP, Win2K and NT line that they stem, using a command-line environment, but is not BACK and you can load it on a damaged disc. For what it's worth, you wouldn't be able to run the BACK of a hard drive from damage in any case, you'd have to load it from a floppy disk or a disk, and it is inefficient for an OS NT-based modern Windows.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Cannot open first pro because he says drivers are not found. Help!

  I had adobe cs5 first pro on my computer for years now and there are a couple of weeks, it stopped working.  A pop up appears and indicates the following (first adobe has not found any capable video modules.  Please update your video display drivers and try again).  I can not even java to work, or download more than any simple vids or mp3.  My computers says that all updates are underway so, how can I find a driver that is corrupt, outdated or does not work?

  Hello

  Computer brand/model?

  Have you tried to uninstall/reinstall the software?

  Adobe Premiere Pro returns an error during startup, which indicates that it can not find capable video game modules.

  https://helpx.Adobe.com/Premiere-Pro/KB/error---preludevideo-play-modules.html

  Right-click on the program icon > select Properties

  Click on the Compatibility tab

  Select Windows 2008 Server (Service Pack 1)

  Select run as administrator

  Click on apply, Ok

  See Solution on this thread:

  https://forums.Adobe.com/thread/1001579?start=0&TSTART=0

• Cisco ASA 5510 - IOS upgrade 7.0 failing. Not found Flash BIOS

  Hello everyone

  I have a Cisco ASA 5510 in a lab with none of the configurations environment what so ever.

  Objective: upgrade the IOS current version 7.0 (8) to 7.1.1 (possibly go to 8.2 until memory upgrade on the SAA: 256 MB to 1 GB and then move to the latest version of 8.2 IOS).

  Output to see the attached Version.

  Output Flash attached show.

  asa711 - k8.bin is the file that has been copied from a TFTP server to flash.

  The following commands have been executed in order to update the IOS

  ciscoasa (config) # boot flash system: / asa711 - k8.bin
  INFO: Conversion of flash: / asa711 - k8.bin to disk0: / asa711 - k8.bin
  ciscoasa (config) #.
  ciscoasa (config) # end
  ciscoasa # write memory
  Cryptochecksum: aaaa08ce ccde38f2 19c42e08 dea24cbd
  2713 bytes copied in 1,450 dry (2713 bytes/s)
  [OK]
  ciscoasa # reload
  

  PROBLEM: the device ASA goes in an infinite loop (guard restart). This is the message on the console:

  The system boot, please wait...

  CISCO SYSTEMS
  Embedded BIOS Version 1.0 (11) 15:11:51.82 5 08/28/08
  Memory: 631ko
  Memory: 256 MB
  PCI device table.
  Bus Dev Func VendID DevID class Irq
  00 00 00 8086 2578 host Bridge
  00 01 00 8086 2579 PCI to PCI bridge
  00 03 00 8086 PCI bridge to PCI 257 b
  00 1 00 8086 PCI bridge to PCI 25AE
  1 d 00 00 8086 25A 9 Serial Bus 11
  1 00 01 8086 25AA Bus series 10 d
  1 d 00 04 8086 25AB system
  1 d 00 05 8086 25AC IRQ controller
  1 d 00 07 8086 25AD Bus series 9
  1E 00 00 8086 PCI bridge to 244th PCI
  1F 00 00 8086 25A 1 ISA Bridge
  1F 00 02 8086 25 IDE controller has 3 11
  1F 00 03 8086 25A 4 Bus series 5
  1F 00 05 8086 25A 6 Audio 5
  02 01 00 8086 1075 Ethernet 11
  03 01 00 177 D 0003 encrypt/decrypt 9
  03 02 00 8086 1079 Ethernet 9
  03 02 01 8086 1079 Ethernet 9
  03 03 00 8086 1079 Ethernet 9
  03 03 01 8086 1079 Ethernet 9
  04 02 00 8086 1209 Ethernet 11
  04 03 00 8086 1209 Ethernet 5
  Evaluate the BIOS Options...
  Launch of the BIOS Extension installation ROMMON
  Cisco Systems ROMMON Version (1.0 (11) 5) #0: Thu Aug 28 15:23:50 CDT 2008
  Platform ASA5510
  Use BREAK or ESC to interrupt the boot.
  Use the SPACE to start boot immediately.
  Start the program boot...
  Startup configuration file contains 1 entry.

  Load disk0: / asa711 - k8.bin... The starting...

  256 MB OF RAM
  Total of SSMs found: 0
  Total cards network found: 7
  mcwa i82557 Ethernet to irq 11 MAC: 0024.974a.65af
  mcwa i82557 Ethernet to the irq 5 MAC: 0000.0001.0001
  Not found BIOS flash.
  Reset...

  The only way for me to do things to normal is if I BREAK the sequence starting with ESC and go into ROMMON mode. I then issue a start command for the SAA to start with 7.0 (8) default IOS Image.

  Please can someone explain what is the problem here?

  Apologies if I'm missing something obvious that I'm not an expert of the SAA.

  Looks like that the ASA is hitting a field notice: fn62378. The FN, it's because of the incompatible version of hardware and software. Please upgrade to version 7.1.2 instead of 7.1.1. If you plan to spend in 8.2. So instead of going 7.1.2 you could go to 7.2.5 (recommanded), then 8.2.5

  http://www.Cisco.com/c/en/us/support/docs/field-notices/620/fn62378.html

  It will be useful.

  Kind regards

  Akshay Rouanet

  Remember messages useful rate.

• Wanted to install adobe photoshop and elements 12 first. But I don't have a disc for the cd. I tried to download, but the link says "file not found".

  Wanted to install adobe photoshop and elements 12 first. But I don't have a disc for the cd. I tried to download, but the link says "file not found".

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

• First Pro CS6 license not recognized - "serial number provided is valid, but calling it a product was not found on this computer."

  I have a new computer and tried to get the first Pro CS6 installed. I have a license first Pro "Version 6"Windows - I can see in MY PRODUCTS. So downloaded installation for first Pro CS6 "old downloads" page - when I put in the serial number, it says ' serial number provided is valid, but calling it a product was not found on this computer. "there is a"select a product"drop down and the only thing on the list is Pro Prem CS5.5 - when I put in the liscence here It says invalid. Just to try, I downloaded the installation for CS5.5 and who does not accept the license at all. What can I do to get the CS6 running on my new computer?

  A bit of history which could be related, I remember that I originally bought first Pro CS5 from someone on ebay, not knowing that it was a Mac version, which would not work on my PC - so I contacted Adobe and upgraded to CS6 for Windows at a lower cost. I see in MY PRODUCTS there is a serial number for the two "Adobe Premier Pro" version 5 for MAC and Version 6 for Windows.

  Help is appreciated!

  Mike

  It asks you to select a product, qualifying, which is that you have you upgraded

  IF you do not have a serial number for a product that you upgraded by using the same platform, please contact our support staff.

  To contact support for a serial number or activation number, please click on the link below:

  (be sure to connect to adobe.com with your Adobe ID first)

  Serial number and activation support

  Guinot

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• First claims the Directory Cache of media is not found or is not writable.

  First claims the Directory Cache of media is not found or is not writable. I then change the settings of cache on an external drive, then it crashes little matter if I open an existing file or create a new. I have re-installed, removed the preferences etc. Often, when he does not crash, it will say file was created in a newer version of Premiere Pro. Hair loss, please help?

  Very well! So, immediately after my last post, I have solved the problem.

  I deleted the cache files in the default directory "C:\Users\"USERNAME"\AppData\Roaming\Adobe\Common" then he stopped the fracas.

  It seems there have been updated via the Cloud Creative so this must have caused tragedies with existing project files. If a new facility + deleting files from the cache, then the changed settings of the media places cached seems to help.

  Thanks to those who tried to help!

  See you soon,.

  Tom

• I try to download first pro and after affects, but says page not found, what happens?

  I try to download first pro and after affects, but says page not found, what happens?

  @

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".