Similar Questions

• Windows Movie Maker ceases to meet impossible to publish the movie

  Windows Movie Maker stop - impossible to publish the movie

  Windows Movie Maker gel

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  I can't publish my movie in windows movie maker - fully he gets to 76% and never completely complete edition (I tried several times, but continues to be the same thing). Everything that happens, is the estimated time for the film to be finished being published continues to increase, but nothing ever happens to the status. I think it has something to do with when I [Preview] play a movie in windows movie maker that I have edited, to halfway through the movie, the movie freezes and won't play any more, although I have yet to play clips. Can anyone has any ideas on how I fix? Thanks ():

  =============================================
  I guess you have a problem with incompatible
  files sources... the most reliable formats to use are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wmv, wav

  The following articles may be useful:

  Type of file with Movie Maker compatibility
  http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

  What file type should I use in Movie Maker?
  http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

  John Inzer - MS - MVP - digital media experience

• First Pro CC impossible to extract the downloaded files U44M1I210

  I took my first Pro CS6 computer and have been unable to get the CC version to work continuously receiver of the message:

  Impossible to extract the downloaded files.  Try to press to redownload again. (U44M1I210).

  Try http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to compile the FPGA in project

  Hello I get the following error when I am trying to compile an FPGA VI on a Compact Rio 9022, I missing something on my stand in? Everyone has seen this before and know what is happening? An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: 7 error error component the generator module VI: NULL Possible reasons: LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer. ========================= NOR-488: The non-existent GPIB interface.

  This looks really familiar.  I know I've seen this error.  I think there is a problem if you upgrade to the latest NOR-RIO, but you don't put at level LV FPGA 8.6.0 to 8.6.1, or something like that.  Would it be, kmoyna?

• Impossible to compile the form

  Hello
  I need compile the form JAIREGIM.fmb
  
  I followed the procedure to compile the form below, but after compiling it is showing the same old date of compilation.
  
  
  CD /apps/visappl/ja/11.5.0/forms/US
  
  Export FORMS60_PATH = $FORMS60_PATH: $AU_TOP/forms/US
  
  f60gen Module = JAIREGIM.fmb Userid = apps/systime_cms
  Module_Type = batch FORM = yes Output_File = JAIREGIM.fmx
  
  
  Thanks and greetings
  Amith

  but the form JAIREGIM.fmx display of the current time.

  Does this mean that fmx file has been generated successfully? If so, copy the file "/ apps/visappl/ja/11.5.0/forms/US" and try to access the application.

• Impossible to download the movie, receive error message: error-2002 a bad public movie atom was found in the movie.

  Original title: error-2002 a bad public movie atom was found in the movie

  I get the following message when tring to down load a short video that sent me a friend. (error-2002 a bad public movie atom was found in the movie).

  Hello

  What is the type of film that you download?  AVI, mp4 to move?

  You said he did before, hs there been changes to the system since the last time it worked?

  Anything added/removed or set to level?

  B Eddie

• Internal error OR-farm - impossible to compile the FPGA VI

  Hello!

  When I try to compile any FPGA VI with LabVIEW2013 or 2012 SP1, I get the following error:

  "Year error occurred trying to connect to this server compilation."

  Details:

  Internal error OR the farm: Client Server received unexpected or bad data. »

  Intermediate files are not generated, the error message appears immediately after I have select build of build specification or I click the run arrow.

  I use the local server for compilation.

  The equipment I use: CompactRIO Evaluation Board - SbRIO9636, DELL laptop, Intel core2 Duo T5800, 2 GHz, 3 GB RAM, Windows 7 Ultimate 64-bit, SP1.

  The intermediate files CAN be generated without any problems if I select in the menu. If I run the FPGA application compile worker, a ToolTip message specifying that "FPGA compile runs", but after a few seconds, another message appears: newspaper several attempts were unsuccessful - please see attached images.

  At first, I thought that my firewall (Comodo 6.3) is the reason for this, so I disabled it but nothing changed. Then I tried to fix LabVIEW FPGA and XILINX tools with the firewall disabled but din do not solve the problem. I tried with LabVIEW SP1 of 2012 and 2013.

  If you have any suggestions, please let me know! Thank you!

  

  

  We would like that you try to reset the NIAuth database by following these steps:

  1. go to Windows Services (Bring up Windows with Ctrl + Alt + Delete Task Manager, click the Services tab, click the Services button at the bottom right of the window.

  2 stop the NI Application Web Server and NI System Web Server services in this order (right click, stopping service and select).

  2 backup, and then delete all the files under %PROGRAMDATA%\National Instruments\NIAuth: registry.bin and commitmark.

  3. run NI System Web Server and NI Application Web Server services in this order.

  4. navigate to http://localhost:3580 / connection of an IE on the local computer and try to log in with username "admin" and password empty. Succeeds, the server will return one signed in as: message from the admin.

  After you follow these steps, try and connect to the FPGA compiler, and then let me know what are the results.

• First error starting Pro CC 2015

  When I try to open first Pro CC 2015 trial version then I see this error:

  Premiere Pro could not find capable video game modules

  My laptop is HP COMPAQ Presario CQ57:

  Processor - 2 x 1.65 GHz

  GPUS - Radeon HD6320

  Pilot later

  RAM - 4 GB

  Ilustrator CC 2015 works very well.

  I tried all the suggestions from this forum without success. Any assistance required.

  This solution does not solve my problem. After disable graphics card error still appear. Can someone help me?

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

  HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change

  The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625.  You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here.  When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later."  After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done.  Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK.  The Page order option will be available in the Advanced Printer Options tab.

  

  

• Adobe Acrobat Pro DC: impossible to validate the serial number. [was: NEED of URGENT HELP]

  I recently bought Adobe Acrobat Pro DC ( order number: 12152877759) for Mac. I followed the steps to download the program. When I got to the page of the serial number in the installation steps, a yellow massage appears at the top of the page with: «we are unable to validate the serial number of Adobe Acrobat.» PLS, contact Customer Service"before I get the serial number. When I entered the number sent by e-mail at the front desk, the same threshold of top massage of the page without any progress.
  

  I have tried several times to uninstall all files related acrobat, reboot the system and download the program of link Download Pro or Standard versions of Acrobat DC, XI or X But same problem repeated itself. I also changed my Adobe account & used a new and still the same problem accrued. I have raised the issue of yesterday & had been connected with meenakshin83966505 throughout the day without any solution progress & it you end up with this massage (if you get the error message, you must Contact Customer Services.) Sign in using your Adobe ID and then select your product from the list. Then select chat option under "still need help? Contact us"). Since last night, so far I have had no response or connected with someone to help solve this problem.

  I paid US $ 450 to buy this product and can not use it to unknown and no problem supported with it!

  I need to get an answer, how to solve the problem and that the program works. or els I have to repay my payment. Fast action is much appreciated.

  Thank you

  Hi Rajshreeb,

  They have already called & solved the problem online. It was really very useful.

  Thank you very much for your positive support, I really appreciate it.

  REDA

• Acrobat Reader XI gives error as it is impossible to start the program because it lacks Telemetry.dll

  The question when opening PDFs with Adobe Acrobat Reader XI.  "Msg: AcroRd32.exe - error system, the program cannot start because Telemetry.dll is missing from your computer."  Try reinstalling the program to fix this problem. "It's Windows 7 Pro 64 bit.  Ran A search of C: telemetry.dll and have not found on the computer.  I have another computer running the same operating system and it does not get an error opening pdf file.  I searched this computer and did not find this .dll either.  3 as soon as I hit him cancel a .dll error appears.  The Tools menu appears to load after the mistake 3rd cancel and then file is opened in the reader.  I ran the repair of the Adobe Reader XI on the computer that has the problem.  There are other computers that get the same error.  How to solve the problem of error message appear 3 x when opening file?

  Hi Ron,

  Try the steps below: -.

  • Uninstall Adobe Reader, run this tool cleaning, Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Re-install adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if the problem persists.

  Kind regards

  Nicos

• Impossible to compile the XQuery modify

  Hi gurus. Oracle 11.2 EA running on Linux. SQL Dev 3.2.30.09.

  I'm pretty decent with XPath and XSLT, but I'm new to XQuery. I've set up a few simple FLOWRs, but I'm getting a little more complex. I have an XQuery query where I am trying to replace some of the inline data. I've clipped the real XML and code down to a very simple example that will always return the same error.

  The error:

  ORA-19112: error raised during the evaluation: XQuery Update cannot be compiled

  19112 00000 - "triggered when evaluating error: %s.

  * Cause: The error function was called during the evaluation of the XQuery expression.

  * Action: Check the error message for possible causes.

  Error on line: column 7:14

  My Xquery:

  SELECT XMLQuery( 
    'copy $tmp := $xmldata 
         modify (replace value of node $tmp/MSG_CNTNT_XML/Message/msgHdr/Source/Format/text() with "abc") 
       return $tmp' 
       PASSING msg_cntnt_xml as "xmldata"
       RETURNING CONTENT ) xmlmct
  FROM (SELECT xmltype('<Message>
     <msgHdr>
        <Source>
           <Format>CTS</Format>
        </Source>
     </msgHdr>
  </Message>') msg_cntnt_xml
         FROM DUAL) 
  ;
  
  

  Any general advice for XQuery and change is cool, but what I am really looking for, that's why I get the "update cannot be compiled. (BTW, note the misspelling, cannot, I don't judge).

  Tips for debugging or be able to view the intermediate outcomes would be great also.

  Thank you.

  LewisC

  Hi Lewis,

  What is your version of the database accurate?

  You try to use XQuery Update Facility (a small extension to XQuery 1.0) which is available only from 11.2.0.3 .

  On previous versions, you can use the updateXML() function:

  SQL > SELECT updateXML)

  2 msg_cntnt_xml

  3, ' / message/msgHdr/Source/Format / text () '

  4, 'abc '.

  (5) xmlmct

  6 (SELECT xmltype ('))

  7

  8

  9           CTS

  10

  11

  12 ') msg_cntnt_xml

  13 DOUBLE)

  14;

  XMLMCT

  --------------------------------------------------------------------------------

  ABC

• Impossible to compile the module vmnet only for VMware Player 4.0.3 build-703057 on Fedora x86_64 16

  During the update to VMware Player 4.0.3 I get this error for vmnet-only compilation. I found a patch for 4.0.2 and a similar compilation for the last error update 4.0.2 but not for version 4.0.3. Any tips?

  JOURNAL

  / usr/bin/make-j - C/tmp/vmware-root/modules/vmnet-only self-build SUPPORT_SMP = 1 HEADER_DIR=/lib/modules/3.3.2-6.fc16.x86_64/build/include CC = / usr/lib64/ccache/CCG GREP = / usr/bin/make IS_GCC_3 = no VMCCVER = 4.6.3 Using 2.6.x kernel build system. make: entering directory ' / tmp/vmware-root/modules/vmnet-only» do /lib/modules/3.3.2-6.fc16.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. \ MODULEBUILDDIR = modules make [1]: Entering directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64' CC [M] /tmp/vmware-root/modules/vmnet-only/userif.o CC [M] /tmp/vmware-root/modules/vmnet-only/netif.o CC [M] /tmp/vmware-root/modules/vmnet-only/filter.o ' / tmp/vmware-root/modules/vmnet-only/userif.c: in function ' VNetCsumCopyDatagram ': '. «/ tmp/vmware-root/modules/vmnet-only/userif.c:520:3: Fehler: Inkompatibler Typ as 1 Argument von "kmap «» «include/linux/highmem.h:48:61: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «» «/ tmp/vmware-root/modules/vmnet-only/userif.c:523:3: Fehler: Inkompatibler Typ as 1 Argument von "kunmap «» «include/linux/highmem.h:54:60: Anmerkung: ' struct page * 'works, aber hat type Argument' const struct < anonymous > «» make [2]: * [/ tmp/vmware-root/modules/vmnet-only/userif.o] Fehler 1 make [2]: * Warte auf noch nicht processes going... ' / tmp/vmware-root/modules/vmnet-only/filter.c:60:16: Fehler: "THIS_MODULE" ist yesterday nicht deklariert (nicht in einer Funktion). make [2]: * [/ tmp/vmware-root/modules/vmnet-only/filter.o] Fehler 1 ' / tmp/vmware-root/modules/vmnet-only/netif.c: in function ' VNetNetIfSetup ': '. ' / tmp/vmware-root/modules/vmnet-only/netif.c:134:7: Fehler: unbekanntes Feld "ndo_set_multicast_list"in the Initialisierung angegeben. /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: Initialisierung von inkompatiblem Zeigertyp [standardmassig aktiviert] /tmp/vmware-root/modules/vmnet-only/Netif.c:134:7: Warnung: (nahe der Initialisierung as"vnetNetifOps.ndo_validate_addr '") [standardmassig aktiviert] make [2]: * [/ tmp/vmware-root/modules/vmnet-only/netif.o] Fehler 1 make [1]: * [_module_/tmp/vmware-root/modules/vmnet-only] error 2 make [1]: leaving directory ' / usr/src/kernels/3.3.2-6.fc16.x86_64' make: * [vmnet.ko] Fehler 2 make: leaving directory ' / tmp/vmware-root/modules/vmnet-only.

  1. Download this archive: http://weltall.heliohost.org/wordpress/wp-content/uploads/2012/01/vmware802fixlinux320.tar.gz
  2. Extract archive
  3. Edit the file patch - modules_3.2.0.sh.  Look for the line plreqver=4.0.2 and to takeplreqver=4.0.3
  4. Save the file, and then run it.sudo ./patch-modules_3.2.0.sh

  I have this picked up on the Internet and it worked for me, as I had the same problem after upgraging my Linux Distro.

  Caveat Emptor

  Thank you

  Sky