First Pro CC will not start

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• PreludeCC and first Pro CC will not update error: "log Transport 2"

  PreludeCC and first Pro CC will not update. Update gets to 62% and then stops with the error code following "Log Transport 2"

  System

  OS 10.9

  MacPro 3,1

  All other applications are updated.

  HI Steve & Perry,

  Have you tried to reboot the machine and apply the updates again? If so, you still get the same error message? If Yes, could you please share a screenshot of the error you get?

  See you soon,.

  Michael Sharma

• First Pro CC will not appear after startup start

  So I got problems with Premiere Pro CS6 wouldn't show after the start screen was finished loading, so I decided that I wanted to move to Premiere Pro CC and try out the course.

  I uninstalled Premiere Pro CS6 and run the cleanup tool and downloaded creative cloud and started to install the first Pro CC. Now when I click on it in CC, nothing happens, and if I start from its location it will work only the splash screen, but after that he finished to load "ExporterAVI.prm", it will close the splash starts and disappear. If I open the Task Manager, I can see first Pro CC running, but there is nothing on the taskbar. Since Media encode CC is installed with it I tried to run that too. He instead of 'Finish' the splash will stop responding to 'ExporterAVI.prm '. My main suspect is ExporterAVI.prm, but I've been able to find anything about the codecs. I reinstalled the K-Lite Codec Pack (Mega) and always the same questions. I can't find any "ExporterAVI.prm" on my computer, no and I don't know if its supposed to be there.

  I'm out of ideas... I tried Googling everything and no solution so far...

  HOT - FIX, NO SOLUTION:

  Okay, so I finished by contact Support Adobe technique and after a few hours trying to move the error and what we have tried to remove the pluging ExporterAVI.PRM Premiere Pro and Media Encoder. Both programs will now run - however I have not tested a .avi file export and I suspect that it cannot be properly. It is a solution for me because I export all the video files in AVI format in any case.

  I've had trouble finding exporterAVI.prm by conducting a search on my computer and the records but Anand (partisan) found.

  My exporterAVI.rpm file was found in:
  C:\Program Files\Adobe\Adobe Premiere Pro 2015\Plug-ins\Common CC
  C:\Program Files\Adobe\Adobe Media encode CC 2015\Plug-ins\Common

  Thanks for the help and suggestions of everyone and thanks to Anand for his patience and several hours of help through my day.

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Windows xp pro sp3 will not start corrupted boot.ini and hal.dll - please help

  I installed Norton 360 offred via internet was last updated.  It immediately launched all applications previously disabled at STARTUP in msconfig.  And shortly after he started to gives me the blue screen "to the death".  This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student.  I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties.  Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged.  I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped.  I can't even the Recovery Console to start on my laptop.  I need HELP, please.

  These profile errors are usually caused by one of the following:

  1-profile corruption.  The user profile is damaged and that Windows cannot load.  To resolve this issue, create a new user profile and move your files to the new profile.   See here for more information:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  2 drives or corruption of the file system.  Run chkdks /f on the volume C:.  Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk.

  3 - virus or malware activity.  Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder.  Check this box until you try #1 or 2 above.

  Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software.  Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key.  In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out.  See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved.

  These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information:

  Solve installation errors using the SubInACL tool to repair the file and registry permissions

  John

• First Pro CC will not import ANY audio file, be it a mp3 or a part of a mp4 video (or other formats)

  Any audio or video file that I drop at first will appear almost immediately with the window

  Audio compliance error

  Movie compilation error.

  Unknown error.

  

  When I check the log error/events (little red X in the lower corner) this window says:

  ' 21/11/14 09:47:28 disc error has occurred while trying to access the following files:

  \\ipsse01\home$\myusername\AppData\Roaming\Adobe\Common\Media cache Files\filename.mp3 44100.cfa ".

  (The file is on my desk)

  This happens at all, even that current audio files windows comes with in the folder 'Sample Music', I tried those too to nothing does not.

  I am at a total loss. I'm new to first pro, but these are generic file formats, so I don't think that the problem is with the file. I have not tried to reinstall because I have to go to our one network administrator / computer specialist (who is also the accountant of the company) so that it can enter the username admin/pass in the pop-up box and she's often so busy. I try to avoid listening to it, if I do not need to (which unfortunately I tend to always have to do a lot)

  For reference, I'm under Win7 Professional 64-bit, 8 GB of RAM and a processor i7 - 4610M @ 3 .00GHz.

  Hey Kevin,

  I had earlier tried to do, but it still doesn't work. Then the company we use for large it projects, suggested pointing where media cache files are saved to a new location, excluding my sync account (which is always saved on my hard drive) and a folder on the hard disk that has not been synchronized with the network. That seemed to fix finally!

  Thanks for all the help and answers, if I really appreciate it!

  -Neila

• First Pro CC will not open or import .flv files

  I just upgraded to windows 7 to 8.1.   Clean install.  Downloaded first Pro CC, AE CC, and a few others.   I can't import or use .flv files in first pro.  It says file type is not supported.  Even if I export flv EI first pro will not open it.  All of my past with flv files projects show that as offline media.   Help, please.   FLV is always worked before.

  Support for importing content Flash has been removed in the latest patch. Please visit this page: http://helpx.adobe.com/premiere-pro/kb/premiere-pro-cannot-import-flv.html

  If you search "FLV 7.1", you will find several discussions on this topic. For example: http://forums.adobe.com/message/5818286#5818286

• My adobe first pro CS6 will not install

  Hello

  I am trying to install adobe trial version first pro cs6, when I say through the implementation, it is Adobe CS6 Encore and Adobe Premier pro CS6 do not meet the requirments, 64-bit operating system os recommended.

  I don't really have any idea what that means or if there is a way around this etc y at - it another version of the trial that does not require 64-bit? My computer is running a 32-bit system.

  Thank you

  Bex

  Unfortunately not.

  Premiere Pro CS6 and Encore CS6 are 64-bit only. They will not work on your machine.

  http://www.Adobe.com/au/products/premiere/FAQ.html#64bit-support

  You could have a peek to Premiere Elements extending on 32-bit and 64-bit.

  http://www.Adobe.com/au/products/premiere-elements/tech-specs.html

• Phone Pro U500 will not start

  Cannot start my Pro U500, when I press the power on button of the projector must enter, there is a kind of noise as the HD tries to start, then everything goes off, then about 5 seconds later turn it on again and he's trying to start again, with the same result, it might take for me to leave power.

  All ideas, took out the battery and power left and it's still there, held the power button for a minute to reset the motherboard, but nothing.

  Paul

  Hi portellen,

  Official website of Toshiba, I found an interesting article on this subject:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  I hope it works and if not, it seems to be a hardware malfunction, but if your laptop is under warranty, an authorized service provider can solve this problem for free. :)

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro L500 will not start on battery only

  Hello!

  I recently bought a Satellite Pro L500 and have the following problems.
  My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
  The only way to get this light off is to remove the battery.

  Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
  Works quite normal, once started - with or without power connected

  SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
  I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

  After having this problem, I've updated to the latest version of the BIOS but nothing helped
  Tried a different battery and did not help
  Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

  Very annoying!
  Please anyone with a solution?

  Hello

  Try this.
  Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
  Together the two parties again, charge the battery and then remove the power adapter.
  Then try to turn on the unit using only the battery.

  If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

• Satellite Pro A60 will not start up CD/DVD

  I have the above and it does not start from cd/dvd. I know that the cd/dvd is bootable and works well. I can boot from the floppy drive and access the cd/dvd without problem, but that dose not allow me to load windows XP. If this is not the drive or the cd/dvd. So what is the problem?

  Paul

  Hello

  How did you try to boot from the CD drive?
  Have you tried to press the C key immediately after starting the laptop?

  Alternatively, you can press F12. The start menu should appear and you should be able to choose the drive as a boot device.