First Pro Cs5 will read my current Cs4 files

Similar Questions

• First Pro CC will not import ANY audio file, be it a mp3 or a part of a mp4 video (or other formats)

  Any audio or video file that I drop at first will appear almost immediately with the window

  Audio compliance error

  Movie compilation error.

  Unknown error.

  

  When I check the log error/events (little red X in the lower corner) this window says:

  ' 21/11/14 09:47:28 disc error has occurred while trying to access the following files:

  \\ipsse01\home$\myusername\AppData\Roaming\Adobe\Common\Media cache Files\filename.mp3 44100.cfa ".

  (The file is on my desk)

  This happens at all, even that current audio files windows comes with in the folder 'Sample Music', I tried those too to nothing does not.

  I am at a total loss. I'm new to first pro, but these are generic file formats, so I don't think that the problem is with the file. I have not tried to reinstall because I have to go to our one network administrator / computer specialist (who is also the accountant of the company) so that it can enter the username admin/pass in the pop-up box and she's often so busy. I try to avoid listening to it, if I do not need to (which unfortunately I tend to always have to do a lot)

  For reference, I'm under Win7 Professional 64-bit, 8 GB of RAM and a processor i7 - 4610M @ 3 .00GHz.

  Hey Kevin,

  I had earlier tried to do, but it still doesn't work. Then the company we use for large it projects, suggested pointing where media cache files are saved to a new location, excluding my sync account (which is always saved on my hard drive) and a folder on the hard disk that has not been synchronized with the network. That seemed to fix finally!

  Thanks for all the help and answers, if I really appreciate it!

  -Neila

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• First Pro CC will not play audio video file

  I tried to edit videos recorded with Bandicam in first Pro CC. The video file itself is fine, when I play it in Windows Media Player all withdrew, but once that I get it into a sequence in first Pro CC despite it showing the audio track and turning the volume to maximum, there is no sound! How to pick up the audio I know is there?

  Bandicam read #10 http://forums.adobe.com/thread/954394 for possible hellp

• First Pro CS5 will be important only audio and video no

  Hey I just installed Premiere Pro on my laptop that runs Windows 7 64-bit home and has a built-in grahpics and the sound card.  When I try to import a video file supported such as mpeg2 or avi, it is important only to the audio and not it video.  I have no idea why Jose happenening.  It worked fine on my desktop which is also running win7 64 bit but thép informal version but it has a 7200LE 8600 GTS graphics card.  I don't know if this is the reason why it does not work on the laptop or not, someone idea why this is happening and how I can fix the problem.

  Thank you.

  Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0

  What is a CODEC... a primer http://forums.adobe.com/thread/546811?tstart=0

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037?TSTART=0

  Too bad to read on the http://forums.adobe.com/thread/662972?tstart=0 installation drive
  -Click on the image embedded in the message of prejudice to enlarge it to the size of reading
  -you need at LEAST 2 disks for video editing, 3 is better

  Read hunting on Partitions http://forums.adobe.com/thread/650708?tstart=0

  A link with a lot of ideas on the computer to install http://forums.adobe.com/thread/436215?tstart=0

• Second hard drive broke off today and after that reattching the XP Pro disc will read the current files.

  When you try to open the XP disc prompts you to format the drive.

  How can I get XP to recognize the current files without loseing no information?

  Hi FeedUsFajitas,
   
  -Is the hard drive is detected?
  -What is the brand and model of your hard drive?
  -What, exactly, is a transcript of the error message that you receive?
   
  Method 1: Check if there is a problem with the device.
   
  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 2: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• First Pro CS5 pixelation with T2i .mov files

  Thanks for the great information!

  Here's my scenario...

  • Windows 7 64 bit family

  • Intel quad core processor

  • Nvidia Geforce Gt240 graphics card

  • 8 GB of ram

  • G - tech g-raid0 drive 2 TB (for image storage)

  • WD Caviar Green 500 GB (OS Win764bit & amp; applications)

  • WD 250 GB usb 2.0 external drive (for backup)

  • First Pro CS5 (prod prem) modded to enable nvidia gt240 graphics card be used with the Mercury playback engine

  Backstory:

  I shot a short film of 2 weeks using a Canon Rebel T2i at 1080 p 24 with shutter speed 1/50.

  At the end of the first day of shooting, I had to transfer the .mov footage off the coast of the Trandcend 16 gb class 10 memory cards with card reader Kingston for the Raid. I used a legacy firewire card connected to the aforementioned PC (it's all I got for the firewire connection at the time), and I noticed that the file transfer has been extremely slow. So for the next two days after I transferred the rest of the video on the Raid via USB 2.0 and the other files transferred much faster.

  Play the images using VLC Media Player is well most of the time, but sometimes I see for about 5 frames pixel information is lost. It is not rolling shutter or jello. Part of the pixelated frame strongly for all 5 to 10 frames. I don't know if it's the loss of data on these images? I agree with a few images here or there, I can work around it if I have to...

  The problem:

  I used the DSLR 1080 p 24 preset to set up sequences of the first Pro CS5 project. After you import the images above, reading in two preview windows randomly is pixelated, similar to the effect of VLC, but random parts. For the most part, VLC is compatible with the management of the problem. Whenever I start the first it will be Pixelize frames in different places than before. Sometimes when I run first first is good, then after a few readings, it starts to distort. After management problem for the current session, the pixelation appears in the clips that have the green status bar. Also, sometimes (randomly) some of the clips in the timeline panel have green waves at the bottom of them, or are completely green.

  I tested the raw images in VLC, WMP, Media Player Classic (after you temporarily install KLite hoping to solve the problem). The problem that all .mov files seem to Pixelize the same framework of each player. First, but pixilated times randomly.

  Tried with two mpeg streamclip and even with cineform neoscene U transcoding. Same results.

  I have not been able to narrow down what is the problem. Any ideas?

  Thank you very much.

  The problem is resolved. My cache of media was written to my local hard drive (c :)), a WD Caviar Green 500 GB. It turns less 7200 RPM, as it is friendly green. After clearing the cache and redirect the path to the raid 0 drive 7200 RPM, the media reads in the timeline smoothly without pixelation. A high technology, Adobe has helped me solve this problem after a lot of troubleshooting. Thank you!

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.

• How to export a lower third animation in first Pro CS5?

  I bought a lower third animation that can opened using After Effects. What I want to do, is to create different lower-thirds with different names (transparent background) and make everyone as a quicktime file to be able to just put in my first pro film when I need to be shown. The question is: how export animated lower-thirds After Effects in first Pro CS5 with a transparent background, it will show just the slightest third animation. Any response would be appreciated.

  Thank you!

  You must make the file with an alpha channel. You want to set up rendering as Millions of colors + Alpha, Alpha right and then use a codec that supports alpha channels. Depending on your system, this can be ProRez 444 QuickTime Animation, or a png sequence.

  Press F1, go to the help files and read the section on render and output.

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• First Pro CS5 'Install' is damaged

  Hello!

  I'm unable to install the first Pro CS5, the disk appears to be damaged. I've been using Illustrator, Photoshop, Indesign, AfterEffects CS5, I admit they get more glitchy with age (closing suddenly)- so I don't know if it's a technical problem with my computer, or maybe I do not download the right choice? I downloaded the program by clicking on Download Adobe Creative Suite 5 products. I would appreciate help. Thank you!

  FYI: I have a MacBook Pro (early 2011), OS X El Capitan Version 10.11.3, processor 2.3 Ghz Intel Core i7, 8 GB memory, AMD Radeon HD 6750 M 1024 MB graphics card.

  

  CS5 is released before the security feature of the CMA, requiring Gatekeeper by default app be sign before they will be installed.

  The solution is to temporarily disable this functionality in security & her preferences setting "Anywhere", before you open the .dmg and running the installation.

  

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833