first start/re-start
When I start first of all my computer in the morning or if I have to restart during the day my home screen appears quickly, however the icons on the home screen or of the clock or down by the clock icons have no room for a few minutes and it never happened and I made no changes to my computer for months. I don't know what the problem is or how to fix.
Something is running in the background that is either having a problem
marketing and stopwatch, or you have much too much
(legitimate or not) from Windows. Do a clean boot
Troubleshooting and/or run autoruns:
http://support.Microsoft.com/kb/310353
clean boot
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
Autoruns
Tags: Windows
Similar Questions
-
When the Microsoft Answers forums first started?
I'm sure someone here will remember!
It is how I get here! http://answers.Microsoft.com/en-usHello BDoTJ,
Microsoft answers Forums began in early 2009. I was a moderator when they first started, but I remember not the month. Initially, we had Windows Vista, which has been supported. Windows 7 and Windows XP have been added later.
If you need the exact date, I know that for you.
Thank you
Marilyn
-
need to take my computer back in the day that I first started it on7/21/2011 my restore point back up to now how can you start over from scratch with no disc?
Most OEM computers have a partition on the hard drive, that allows to give it bought as provided. Usually, you activate this feature by pressing a key or combination of keys when the first splash screen appears at startup. Look quickly at the first screen that appears, and you could see the key that you press. Otherwise, go to your computer manufacturer's website and download the manual for your computer. Instructions must be there.
HTH,
JW -
can I delete login page so that windows starts automatically when you first start?
can I delete login page so that windows starts automatically when you first start?
Yes, you can.
-
Malfunction in HP Home &; Biz: only first start translates into an impression
Printer: HP LaserJet CP1515n
Material: iPad 3, iPhone 4 (both iOS 5.1)
Software: HP Home & Biz 4.1
First the good stuff: fine everything seems if I print directly from home & Biz (Png, Jpg, PDF). Top to bottom, from left to right all very well.
The bad thing and why I post:
1. I received the email with an attachment, e.g. PDF.
2A. I opened the PDF and open the PDF file in home & Biz (First Start, App) closed.
3. The PDF is displayed. I opened the preview before printing.
4A. is my printer and the status light is GREEN.
5a. I could print. I am happy
2B. I opened the PDF and open the PDF file in home & Biz (already open App and another document has been posted and printed before).
3B. The PDF is displayed. I opened the preview before printing.
4B. is my printer and the indicator light is RED.
5 b. I couldn't print.
Question: why I could only print if first closed the HP Home & Biz app?
Thank you for helping me.
I'm sorry this isn't the problem.
On the German Board which solved the problem.Solution: my printer is not soustenans and I can Feeling Lucky that I can print.
-
PC refurbished used to install windows on the first start
I bought a refurbished HP Compaq 8000 Elite Convertible Minitowers, which has been renovated by Skyline Advanced Technology Ltd. During my first start, it is impossible to install windows 7 pro. He told me to reboot to install windows, but he kept loop this error. How can I fix?
It was not supposed to come with a version of Windows already installed? What version?
Why were you trying to install Windows 7 Pro, and whether you like installation media?
Bottom line: "all the AST computers offer automatic to a warranty of 1 year with extended warranty offered.» Ask AST to fix it: http://www.astsys.com/home/#service
-
As of February 17, I had a BSOD whenever I first start my machine (at roughly the screen black with the Windows logo, but before than the blue welcome screen) - this is an IRQL_NOT_LESS_OR_EQUAL
The machine reboots and asks if I want to enter a mode of recovery or start normally. In fact, the recovery mode doesn't have the only time where I've tried, but the machine boots normally if I choose to boot normally to the usual "Windows did not start properly" black and white screen.
Processor is an Athlon II X 4 620
2 x 2 GB DDR2 RAM
Catalyst 13.1 running ATI 5750 512 MB graphics card (later non-beta, AFAIK)
via the USB port (but unchanged for months before the show):
3 x external hard drives
Xbox 360 controller
keyboard and mouse are plugged into the PS/2 ports via USB to PS/2 adaptersNothing has changed except the last raft of Windows updates 13, which caused a problem or something fell. First start always travel on - same question on the 21st, 22nd and today. However, after the initial accident at the start, asking to start Windows normally results in all the fine to come and stay there until I have reboot (same collision model) or turn off, and then again the next day (same model of collision).
I'm afraid that this is the beginning of the end for my machine, but all this modern bar game installs (curse you DRM) is saved on my drives external is not a total disaster if it will die.
Any ideas please?
SkyDrive link to the Minidump: https://skydrive.live.com/redir?resid=6FD1C58B297A41AE! 169 & authkey =! AHMgC0W-wV2ldIs
I have run via WinDbg and have the following:
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {0, 2, 0, fffff80002ed3cd4}
Probably caused by: ntkrnlmp.exe (nt! KiPageFault + 260)
Follow-up: MachineOwner
---------3: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 0000000000000000, referenced memory
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80002ed3cd4, address memoryDebugging information:
------------------READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030f7100
0000000000000000CURRENT_IRQL: 2
FAULTING_IP:
NT! IopCompleteRequest + c64
fffff800'02ed3cd4 488b 09 mov rcx, qword ptr [rcx]CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XA
Nom_processus: csrss.exe
IRP_ADDRESS: ffffffffffffff88
TRAP_FRAME: fffff88003d6d6e0-(.trap 0xfffff88003d6d6e0)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = fffff88003d6c958 rbx = 0000000000000000 rcx = 0000000000000000
RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff80002ed3cd4 rsp = fffff88003d6d870 rbp = 0000000000000000
R8 = 0000000000004740 r9 = 0000000000000080 r10 = 0000000000000002
R11 = 00000000000001c 8 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv ca ei pl nz cy PE
NT! IopCompleteRequest + 0xc64:
fffff800'02ed3cd4 488b 09 mov rcx, qword ptr [rcx] ds:547 c: 00000000 00000000'=?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff80002ebe1e9 to fffff80002ebec40
STACK_TEXT:
fffff880 '03d6d598 fffff800' 02ebe1e9: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
fffff880 '03d6d5a0 fffff800' 02ebce60: 00000000 00000100 "fffff880 '03d6d998 fffffa80' 06162f78 fffffa80'05 c 31690: nt! KiBugCheckDispatch + 0 x 69
fffff880 '03d6d6e0 fffff800' 02ed3cd4: 00000000'00000001 00000000'00000000 fffff880 '20206f49 fffff880' 03d6db58: nt! KiPageFault + 0 x 260
fffff880 '03d6d870 fffff800' 02eb1657: fffff8a0 00000000'00000000 00000000'00000000 00000000'00000000 00000000': nt! IopCompleteRequest + 0xc64
fffff880 '03d6d940 fffff800' 02e6cee5: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
fffff880 '03d6d9c0 fffff800' 0311396a: fffffa80 ' 060608a 0 fffffa80 '06163b 30 fffff880' 03d6db50 fffff880 ' 03d6db48: nt! KiCheckForKernelApcDelivery + 0 x 25
fffff880 '03d6d9f0 fffff800' 031dc85e: fffffa80'00000004 fffffa80 '06163b 30 fffff880' 03d6db50 00000000' 00000000: nt! : NNGAKEGL: 'string' + 0x292ea
"fffff880 '03d6dae0 fffff800' 02ebded3: 00000000 ' 00000030 fffffa80 ' 05c36b50 00000000' 0020f478 00000000' 0020f601: nt! NtMapViewOfSection + 0x2bd
fffff880 '03d6dbb0 00000000' 7767159a: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13
00000000' 0020f458 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x7767159aSTACK_COMMAND: kb
FOLLOWUP_IP:
NT! KiPageFault + 260
fffff800'02ebce60 440f20c0 mov rax, cr8SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt! KiPageFault + 260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
Nom_image: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 50e79935
FAILURE_BUCKET_ID: X64_0xA_nt! KiPageFault + 260
BUCKET_ID: X64_0xA_nt! KiPageFault + 260
Follow-up: MachineOwner
---------Some drivers of Norton Internet Security are active at the time of the accident.
Try to uninstall Norton Internet Security and see if the problem resolves.
Then you could reinstall Norton Internet Security.
-
I first started with a free trial. Now the button repeat guard appearing everytime I open Adobe. How can I stop it?
Hi nancyd91281316,
If you purchased from a subscription to Acrobat, you simply activate it by logging in with your Adobe ID and password. In the dialog box of the trial which appears at startup, click on this software license and enter your Adobe ID and password.
Please let us know how it goes.
Best,
Sara
-
Cannot access the local admin page after first start
Hello
I am not able to access my newly purchased RN202, SN 45Y2535W003FC. I just plugged the power cable and turned on, but the power light keeps blinking even after hours. The NAS will connect to my local network with the ip 192.168.178.32 and ends by RAIDar under this address. However, the local admin under https://192.168.178.32/admin and https://192.168.178.32 page (even with http://) is not accessible. The connection is not accepted (cannot be connect-page in the browser). Also access more ReadyCLOUD is not possible, because the NAS cannot be discovered. Currently, there are no hard drives in the NAS. I also tried to insert a HARD disk already formatted in combination with a factory reset, but it does not work with the same result. It's already a replacement unit by my retailer the first device showing the same behavior, so I excluded a technical defect. What I am doing wrong? Any help would be greatly appreciated.
Best regards
Patrick Schmidt
OK I found the solution by myself. Without a HARD disc inserted the NAS will not start correctly. As mentioned, I already tried to insert a HARD drive and then do a factory reset. Now, I saw that I have is to not properly place the HARD disk. If you open the lock on the grid (the thing in which you put the HARD drive), then you can not insert in the case completely and do not connect the connector of power und data. Maybe a little more detailed manual on it (for Dummies like me) would be useful. Argh...
-
First start of time without battery
I ordered a HP Pavilion G6 2051SD and in the meantime that it I plan on what I'll do once I gett it.
Well part of it, is that I won't be able to keep my hands of it and wait for the battery to charge. So I was wondering if there are harmful to the laptop if the first time I started it would be without battery. I have heard many different arguments on how to deal with a battery, but nothing about the laptop.
What is more, it's a laptop that I intend to use most often connected. So is - that it is better if I keep it at full capacity or more around 50% is stored?
Hello
When your laptop arrives, just insert battery, plug in the power adapter and start the machine. It is quite Ok to be implemented the specification - the battery will continue to charge while you do this without any problem.
It is certainly very well run Notepad on just the AC adapter - if you're going to be doing this for the extended period of time, drain the battery to about 40% before storing in a cool place.
Regarding the maintenance of the battery once a month, reinsert the battery, turn the machine on and let the battery fully charged. Unplug the AC adapter and let the unit run until you start getting a "low battery" warning Completely load it again, then let the battery drain to about 40%. Shut down the laptop, remove the battery and store it separately in a cool place. Repeat this procedure each month will help you keep your battery in good condition.
For more information on lithium-ion batteries, see link below.
http://BatteryUniversity.com/learn/article/is_lithium_ion_the_ideal_battery
Kind regards
DP - K
-
I type a line and press ENTER if I can move to the next line, but the cursor jumps back to the first word I typed and I can't move to the next line
Hello
-You are aware of any changes made on the computer before this problem?-Respect the limit with the Wordpad?-Work on a laptop or desktop?Follow the steps mentioned below and check if the problem persists.
System File Checker Scan (Scan SFC): Ihelp in the digitization of all immediately protected system files and it allows you to know the system files corrupted on your computer.
(a) click on Start
(b) choose run and type CMD
(c) type sfc / Scannow
For reference:
http://support.Microsoft.com/kb/310747
Response with more information to help you further.
-
When I first turn on my computer a black watch screen 'disk dics failed 40, press F1 to continue or F2' how can I have this judgment?
Hi hatrack
the starting pressure remove or f12 to go to the BIOS Setup and find the floppy drive from the bios option and disable it, then it will not show you that again...
Good luck
Firoz
-
How can I stop annoying pop ups when I first boot my computer for most of the software on my computer.
Hello
There are different ways to do
1. open the particular program and under its tools then Options see if you can stop it when loading load windows
2. you can get out of startup entries
but be careful what you do if you disable an essential service
using msconfig read this tutorial;
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this program;
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
Failed to start service persona at first start
When the machines are first created in a (non-persistent) linked cloning pool, they are unable to start the service of persona. The following text is saved in VMWVvp.txt
[0] [12/02/2014 11:11:55:0913] [RTOOpenMainLog] could not retrieve the record depth, using default: 1
[0] [12/02/2014 11:11:55:0913] [RTOLogonService] LFH activated
[0] [12/02/2014 11:11:55:0913] [RTOLogonService] event Shutdown created
[0] [12/02/2014 11:11:55:0913] [RTOLogonService] skipped license check
[0] [12/02/2014 11:11:55:0913] [RTOSetTokenPrivileges] set the SE_RESTORE_NAME privilege
[0] [12/02/2014 11:11:55:0913] [RTOSetTokenPrivileges] set the SE_BACKUP_NAME privilege
[0] [12/02/2014 11:11:55:0913] [RTOSetTokenPrivileges] set the SE_SHUTDOWN_NAME privilege
[0] [12/02/2014 11:11:55:0913] [RTOSetTokenPrivileges] set the SE_ASSIGNPRIMARYTOKEN_NAME privilege
[0] [12/02/2014 11:11:55:0913] [RTOSetTokenPrivileges] set the SE_INCREASE_QUOTA_NAME privilege
[0] [12/02/2014 11:11:55:0913] [RTOLogonService] process token retrieved
[0] [12/02/2014 11:11:55:0929] [RTOLogonService] doesn't have a driver from: 0 x 80070422
If I restart the virtual computer, the service starts successfully. I checked before I reboot and the correct GPO shows such as applied. Entries in the event viewer indicates that the GPOS are detected and applied (and this is confirmed by the political group management snap-in). After the virtual machine restarts, there is an entry in the event log application that start the service of Persona that was not present on the initial startup (once the machine has been fully implemented). If the Persona service does not start, the user won't be able to connect for 10-15 minutes, after which they will have a blank desktop and the taskbar with no icons (it's on windows pro 8.1).
I could script restarts the virtual machines, but that should not be something that needs to be done.
Suggestions on where else to look at?
The problem ended up being the master VM that children have been cloned wasn't in the OU to run persona. Once I put in the unit ORGANIZATION appropriate, forced a group policy update and restarted; the persona service started successfully on the master. Took a snapshot and recomposed in the pool and everything works as expected.
-
Premiere Pro to crash on my first start of the program
So I bought my subscription to Premiere Pro today and everything downloaded with CC and the second I start the first pro I select new project, and then the program closes down. I uninstalled and reinstalled, restarted my PC and still no luck and I am running on a PC. I tried many things as run as administrator, updating the drivers, reboot and nothing. My Media Encoder CC works perfectly well.
Specifications of the PC:
Operating system: Windows 8 64-bit
Processor: Intel Core i5 - 3350P 3.10 GHz Quad Core
RAM: 6 GB
Hard drive: 4 TB
GPU: NVIDIA GeForce GTX 660
Monitor: ASUS 1920 x 1080
Thank you!!
Ok
Go to c:-c:\Program * 86-common-Adobe-SLCache, rename the Cache of the old cache SL SL
go to c: program data-Adobe-SLStore and rename the Sl store to store the old SL.
The program data, it is a hidden folder so I have to change the display option to find the file.
After you follow these steps, run the application as administrator.
Thank you
Arjun
Maybe you are looking for
-
Why my screen doesn't have extremely small text on some Web sites, but only a few.
on only two websites, (the ones I use most) the screen is reduced to a size that I can barely see
-
This only happens in the amazon website and specifically in the shopping cart page when you press the 'delete' or 'save for later' options. The message even before as I click on the option. »
-
How to remove the file from Dr. Watson?
How to remove the Dr. Watson File?
-
Windows Update cannot install Office SP2 and KB973924; codes error 78(f) and 643
Hello I'm currently under Windows 7 64 bit which has been updated to XP in January this year. Since July, Windows 7 update tried to install following updates without success: 1) the 2007 Microsoft Office Suite Service Pack 2 (SP1/SP2) - error code ge
-
Planning in Foglight 5.6.4 report
Hello We would like to schedule a report for one of our Application teams, we want it in a mode like,. "every day the report should be generated with data from the previous day (24 hours)" automatically and above all it should be given the day before