Fix bug (cannot connect) 12 c Cloud control IE 11 20465665

Similar Questions

• Why cannot connect with DB after control DB console configure NetMgr/NetCA?

  People,
  
  Hello. I am running Oracle Database 11 GR 1 material in Oracle Linux 5.
  
  Before you configure Net Manager/Net CA, database https://localhost.localdomain:1158 control console / em, SQL * more and Developer SQL to connect to the Instance of database DB1. All instructions SQL runs correctly.
  
  After Configuration Manager Net/NetCA, all the tools of Admin above cannot connect to the Instance of database DB1 is the only case of DB.
  
  What I've done is added 2 headphones more in Net Manager.
  
  The original listener does not change which properties are: Protocol TCP/IP, Host localhost, Port 1521
  
  Can any folk tell me what causes all the administrative tools cannot connect with DB1 after configure NetManager/NetCA?

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  ORACLE_HOME/bin directory, the command. / sqlplus SYS/SYS used to run correctly after the installation of the database. But after stopping Linux operating system, the command. / SYS/SYS cannot connect with Dabase more sqlplus.

  I think that the command. / emctl start dbconsole should start to the top of the database. Am I wrong?

  NO, you're not correct.

  >

  Is there another way to start the database?

  sqlplus
  / as sysdba
  startup

  as shown below
  BCM@BCM-laptop: ~ $ sqlplus

  SQL * more: Production release 11.2.0.1.0 Sun Jul 17 20:05:09 2011

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Enter the user name: / as sysdba
  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 1553305600 bytes
  Bytes of size 2213656 fixed
  1275070696 variable size bytes
  268435456 buffers of data bytes
  Redo buffers 7585792 bytes
  Mounted database.
  Open database.
  SQL >

• Cannot connect in Creative Cloud Desktop

  Howdy! User of short-lived, first calling time, blah, blah.

  I can't connect to Creative Cloud Desktop. This has happened for at least 3 days. When I enter my username and password (I checked several times - they are correct), I get the circle Spiney of treatment and then this message: "unknown Server error. Login is currently unavailable. We are unable to access your account. Please try again later. "There is a button"try again ". I clicked - rinse, repeat.

  I have:

  1. Uninstalled and re-uploaded and re-installed.
  2. I tried to use Adobe Creative Tool Cleaner (CTACC) cloud.
     1. As the instructions contained in this file delimit: first of all, I uninstalled Desktop. Then I downloaded and opened CTACC. However, I could not clean - because it was not in the list - because I had uninstalled.
     2. Cleaning then reinstalled and tried. No joy.

  If I understand correctly, I can not connect, will expire the license on my computer and I won't be able to use these products - where I make my living.

  Please help as soon as possible.

  Thank you!

  Best,

  Ian

  p.s. - 2009 MacbookPro, 8 GB of ram, 2.8 Ghz Intel Core 2 Duo

  Very well!

  I'm in--used the following procedure from this page: http://forums.adobe.com/message/5419167

  If you are unable to connect to the creative connection of cloud, but there is no error message please try, follow these steps:

  1. exit creative Cloud and Adobe Application Manager connection (if it is running).

  2 delete your opm.db file location:

  Windows - c:\Users\<>

  Mac -to/Users / / Library/Application Support/Adobe/OOBE/opm.db

  3 restart the connection creative cloud. You will be asked to log in again.

  It's #25 post, about 2/3 down the page.

  I consider this closed, for now.

  Thank you!

• cannot connect to internet cloud Adobe Connect

  I have a problem with the connection of creative cloud. It does not connect to the internet. And I have no problem with the internet.

  I tried several days, but it won't work. So I thought uninstall creative cloud connect and download again and maybe it works.

  But now I can not download it anymore. Where can I go and I see my files, but there is no download button more.

  Can you help me.

  Cordially Cora

  Hi, its suspension for instant

  For more information, see this: view http://blogs.adobe.com/creativecloud/update-on-creative-cloud-connection-and-file-sync-pre /

• Cannot connect using Creative Cloud Desktop (Bug)

  Whenever I get my login and my password, the application of office says "you have been disconnected" and brings back me to the login screen. He always goes in a loop like this for. I am sure that my login and pass are correct.

  I want to connect to get auto-updates on applications and easy access to all Cloud applications. Thanks for any help, tried everything including uninstalling and reinstalling.

  Hi Modus21

  Please uninstall the desktop application and follow the steps below:

  Delete the file opm.db.

  1. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  2. Delete the file opm.db.

  Redownload the app desktop cloud creative https://creative.adobe.com/products and the connection.

  Concerning

  Akshay

• Cannot connect to creative cloud

  I am unable to connect to the creative cloud. When I click the icon at the top of my screen, the attached picture is what I see. I'm not even to click in each box to enter username or password. Any help would be appreciated!

  

  Hi Alexis,.

  I hope that you tried different browsers & deleted the cookies & cache too.

  You can try the Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  You can contact support for this issue through https://helpx.adobe.com/support.html#/top_products .

  Concerning

  Stéphane

• Cannot connect to creative cloud App

  I can't connect to the creative cloud app, everytime I try, it appears upwards. I can connect online (via my browser) very well, but the app on my desktop does not work.

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  - and the "loopback" https://forums.adobe.com/thread/1504792

• cannot connect to the db control

  Hello
  10 g R2 on Win 2003, I can't login to control db with sysman or sys. I get this:

  Error 
   
  The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information. 

  I can connect as sysman in sqlplus. In emoms.log I have:

  2010-03-19 16:53:32,355 [HttpRequestHandler-29449410] ERROR sec.auth isUserPrivileged.1402 - Exception while getting priv information: 
  java.sql.SQLException: ORA-01017: invalid username/password connection refused.

  Thanks for help.

  Have the password you changed sysman db level if yes then please set password to the original one and try again.

  If you want to store the new password, then change even in files too.

  If you will have to changed password in the file as emoms.properties.

  Please follow link below

  http://racdba.WordPress.com/2010/03/08/how-to-change-the-SYSMAN-password-used-for-grid-control/

  Concerning
  Rajesh

• Cannot connect to creative Cloud (for updates)

  When I login, I get message "You have been logged out."

  I tried several times with the same results.

  Help?

  Hello!

  Try solution 2 here:

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

  I had the same problem and deleting file OPM helped.

• How to day/change the descriptor of connection to a database to target CARS in Cloud control

  I have Cloud control 12 c than Release 3 implemented and followed by many hosts and targets. However when monitoring my RAC (2 knots), it cannot connect to database instances (although it shows them only up to). I get the message "IO error: the network adapter could not establish the connection. I see that the connect descriptior using vip, rather than the host name.

  How can I update the connection descriptor in Cloud control to the correct values?

  Change the following configuration control listed below note

  How to change/update Configuration of the analysis of a target database or the listener in 12 c Cloud Control (Doc ID 1385769.1)

• I get a message on my iMac 'The Mac cannot connect to iCloud due to a problem (my email address) preferences iCloud open to fix this', but don't know what to do next for sorting. Please notify.

  I get a message on my iMac 'The Mac cannot connect to iCloud due to a problem (my email address) preferences iCloud open to fix this', but don't know what to do next for sorting. Please notify.

  Enter your ID and password.

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23

• Microsoft Fix It online, something was wrong and we cannot connect you right now. Please try again later.

  Dell Vostro 400 desktop, Windows XP sp3 running hard. it can not enter difficulty online without the following, "Microsoft Fix it online, something was wrong and we cannot connect right now. "Please try again later". Also, previously, when I could get online, my computers does not list the computer I use actually and I can't add the computer or change options.

  Hello

  1. Are you connected to any network?
  2. Have you been able to connect earlier?

  We use Microsoft Live account to connect to Microsoft Fixit Center Online.

  I suggest you try posting the question at help below links:

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  http://answers.Microsoft.com/en-us/windowslive

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Cannot use parental controls, error, something went wrong and we cannot connect you right now. Please try again later.

  When I try to use the connection parent in windows, I get the following error:

  Sorry, the service is not available now

  Please try again later.

  Error code: 803D 0013

  When I try to log on to the familysafety.live.com site, I get the following error:

  Something was wrong and we cannot connect you right now. Please try again later.

  This happens on both accounts of parent. Here are the addresses of e-mail for these accounts: * e-mail address is removed from the privacy * and * address email is removed from the privacy *.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems access Family Safety.  Let me try and help you with the issue that you are facing.

  Many users facing this issue fixed by updating the Microsoft Account profile.

  Please update the name and name in the Microsoft account profile, then check if it helps.

  See the article:
  Security information for the Microsoft account: FAQ

  http://Windows.Microsoft.com/en-us/Windows-Live/account-security-password-information

  See also the suggestion provided by "Jude D. McCoy' of this thread:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/cant-login-to-family-safety-website-redirect-loop/38477335-e8ae-4AA1-81c8-acb6343377f9

  I hope this helps. If the problem persists, we will be happy to help you.