Flash CS6 hangs during loading

Similar Questions

• Satellite A105-S1014 - BIOS hangs during loading

  Hi all

  I'm working on an A105-S1014. the problem is that when trying to boot the system, the bios starts to load, but it freezes. There is a bar of progression at the bottom of the screen and it stops just about 2/3 of the way. This is a laptop that has been abandoned so that on. Initially, he was stuck in a reboot loop. One of the memory modules was knocked loose so I reinstalled them both. Now im stuck and cannot get the bios to complete loading. Ive opened the laptop and checked all the connections and wires to make sure that nothing else is loose or disconnected. I tried to exchange the memory one at a time and can not think of anything that would stop the bios to load a configuration jacked up. I can't reset the cmos because the battery is soldered in place and there are no jumpers that I see.

  Any ideas? Thanks in advance :)

  Hi Theeone,

  Usually if the BIOS hangs while loading procedure, there seems to be a serious hardware problem but I don t know what part is assigned exactly

  In your case I would try this first:
  Remove the battery and the AC adapter, now wait at least an hour. Reconnect the battery and the AC adapter / CC and try to start the laptop.
  It work?

  If this isn't the case, you need professional help of an authorized service I think. Guys should check what part is affected and needs to be replaced. ;)

• Flash cs6 hangs on new or open the file

  Hello

  I used Flash CS6 very well this morning. Mainly, sketch of a character using the pencil tool and an Intuos 4. Tonight, I open my file to continue working, but Flash crashes on opening (in fact it crashes). Also, I try to create a new file, crashes. If I click on anything, whether it responds normally.

  I tried cleaning my fonts. Nothing.

  I tried to fontinfo.txt. Nothing (just a missfont.map that is created every time that flash starts)

  I deleted my prefs via the CTRLALTSHIFT. Nothing.

  Reinstalled, nothing.

  So what now?

  TECHNICAL DATA: 4 GB of ram, 1 GB nvidia gt240m, 500 GB hdd, wacom intuos 4 m, windows 7 x 64

  Check that the Wacom drivers are up-to-date. Try disconnecting the Wacom tablet when opening Flash. Try to uninstall and do a clean install again.

• Flash CS6 crashing to 'load workspaces.

  I use the desktop application creative Cloud for all my applications. I am able to open and use all my other applications except Adobe CS6. It hangs at "building workspace".

  I uninstalled and reinstalled but still does not work. Even if I try to open a flash file it's always the same charges until "building workspace" and then hangs. Anyone have any ideas?

  reset your preferences, FAQ: how to reset Flash professional to configurations by default and preferences?

• Premiere Pro CC 2014 - hangs during loading

  Hello

  I recently installed Premiere Pro CC 2014 on my laptop (see specifications below), but think that the video (my files are in general. MTS file), the window hangs and I have no other choice but to close the program. I tried to identify the source of the problem by making things a bit, but nothing has worked yet:

  • Open the smallest. MTS file I (~ 20 MB)
  • created new projects to the DV instead of HDV format
  • Open the new file at a time

  So far, nothing works.

  My computer specs are:

  • Intel Core i7-4710MQ [email protected]
  • 16 GB OF RAM
  • 64 bit
  • Windows 7 with Service Pack 1

  If you need any other info to help, please let me know. I'm new on Premiere Pro, but scope by the user of the general software.

  Thank you

  What option is selected for the Mercury playback engine?

  Have you tried switching video converter to the Mercury playback engine software only? (It would be under file > project settings > General)

  Thank you

  Regalo

• Manager extensions CS6 hangs at startup to the top

  I have problems getting my plugin Manager to initialize.  I could not get it started.  It blocks loading extensions.  I removed all extensions of old and past my system adobe products.

  Your user name contains an apostrophe? No have you updated the extensions Manager to the latest version? Extension Manager CS6 hangs on "Loading extensions" message if the user name contains an apostrophe. This question has been fiexed with 6.0.2 update. Please download

  http://download.Macromedia.com/pub/dw_exchange/extension_manager/win/AdobeExtensionManager-6_0_3-mul-AdobeUpdate.zip and install it to upgrade the extensions Manager to the latest version. You can also use Adobe Application Manager to update all of the Adobe products, including the extensions Manager.

• Flash CS6 started hanging when opening or creating projects - help!

  Hello

  I have not used the Flash CS6 (on Win 7 x 64 Pro) for a few months, and now, when you open or create projects, Flash crashes at about 10% CPU and will not continue loading.

  I created a dump file of the Mini using Process Explorer, which can be downloaded here (9 MB) Dropbox - Flash2.dmp

  Please can anyone help diagnose it, so I can get it working again? I have plans on hold (don't we all).

  Thanks for your help

  Richard

  Thank you. None of these circumstances applied to me, but I found the problem by using a few process and Thread analysis tools. There was a problem with my Wacom drivers and for some reason, and to delete and reinstall these has solved the problem.

• Bug - Flash CS6 help does not load

  New install of WIndows 7 (32 bit). Test Flash CS6 installation costs. Click Help > using Flash and nothing happens. Help does not load. Browser opens. Nothing happens. Even with the help > Centre de Support Flash. Also installed Photoshop CS6 trial and this system does help support (browser opens to the online help page). Flash CS6 help is completely dead. Does anyone else know this? Or better yet - how to fix?

  Hi Alec,.

  It is a known problem and you need to install Flash Pro CS6 help update to display help within Flash Pro CS6.

  Please let me know if you still encounter problems look a help.

  In addition, at any time you can view the last material assistance, learning and getting started with http://helpx.adobe.com/flash.html

  Kind regards

  Suhas Yan

• Hang the TWO Flash CS6 and CS5 launch

  I mentioned in another thread, but I thought I should post separately in the hope to get help and attention a bit more.

  I used Flash CS5 and CS6 on this machine (Windows 7) at least a year or two without problems.

  I recently tried to open Flash CS6, but it is locked at the beginning upward. Farm splash screen and a window opens to the main program, but the window remains empty (just a mount or white to white), with the notification Windows "unresponsive" at the top of the window.

  I decided to try CS5 instead, which I also installed it on this machine, and it has also failed to launch, in the same way.

  I tried to re-create preferences according to the methods described on this link: http://forums.adobe.com/thread/992810. This did not help.

  I also completely uninstalled CS6, applied the cleaning tool and reinstalled CS6, still no luck.

  My other CS6 products seem to work well. It is Flash that is having a problem.

  Apparently, changed something on this machine that prevents me from using ANY version of Flash professional, but I have no idea what it is or how to fix it.

  Clues? Anyone else has the same problems?

  There was a problem reported by some users of Photoshop CS6, and I wonder if it's related: http://forums.adobe.com/thread/1325356. I tried the patch but it does not solve my problem with Flash.

  Thanks to the support team! Excellent help has been provided, and my Flash CS6 works again! The solution is to uninstall Java 7 and then reinstall the Java 6 runtime environment. I have not yet tried to reinstall Java 7, but I hope I can do it without problem.

  I think that all the trouble occurred when I used the Oracle tool that removes old versions of Java, but I can't be sure. I was doing some Java development and installed the new software development kits, remove older versions of Java, etc., so some kind of problem has been introduced.

• Flash CS6 and SDK 10

  Hello

  I had really intended to build a new application for BB10 using Flash Professional CS6. In fact, I was very happy. I have followed the development of BB10 and I'm a big believer in the potential. I expected to be part...

  I tried to load the Blackberry 10 SDK in Flash CS6 and got nowhere. There is minimal support both online in the forums... Some users seem to have thought of it using some hacking... It is not intuitive and easy to use but...

  BlackBerry 10 SDK has been for AIR - 3.0

  Adobe is now running AIR 3.5.

  Then the release of the SDK Gold is out and I was a happier time, think that some of the compatibility has been set, but as far as I know... It's the same as before download... AIR 3.0 SDK

  I understand that the SDK works with Flash Builder, but honestly, I'm boggled as to how they are imported and linked to Flash Pro... CS6...

  I would have a return e-mail, but I couldn't find a contact e-mail... So, I posted in the forum...

  I hope in the future, more attention will be given to developers Flash Pro and compatibility will be fixed...

  I am looking forward to BB10 and wish RIMM much success...

  I strongly recommend that look you in Flash Builder, if you do any serious coding. The workflow is much more intuitive than Flash Pro especially for mobile development. That being said, I still use Flash Pro every day to the creation of content, but I do all my coding in Flash Builder.

  As others have found ways to get the API in Flash Pro there, but it is not a supported platform and will not in the short term. If you are not interested in using the API, I published an article on how to create an application BlackBerry 10 with Flash Professional here - http://supportforums.blackberry.com/t5/Adobe-AIR-Development/How-to-Create-a-BlackBerry-10-AIR-Appli...

  We are upgrading to the new AIR runtime, but it won't be ready for the launch. It will be released in an updated version of the BlackBerry 10 operating system in the future. You can get updates on the AIR here - Roadmap https://developer.blackberry.com/air/downloads/roadmap/

  Kind regards

  Dustin

• Flash CS6 starts do not

  Hello.

  I need help.

  My Adobe Flash CS6 is upward for some reason and I can't understand why. It was fine yesterday, but when I opened it today, he said I had to download Adobe Application Manager for my "trial" (which doesn't make sense to me because I bought it.) So what I downloaded and it seemed that it worked because the loading screen has increased, but when he arrived at the initialization of fonts that he just disappeared and it has been like this since

  I have a computer dell laptop for windows 10 in case you are wondering

  too bad, I actually he stares at me, it turns out that I had to reinstall it. but thanks for your help anyway Colin

• Flash CS6: Jerky Animation and Photo appears distorted while dragging

  Hi people, I use Flash CS6 (don't have not upgraded to animate again). I use a lot of Adobe design products, but fairly new to Flash, even if I understand the basics of the timeline and such. I have two problems. I'm trying to set up a short animation 1920 x 1080 (30 sec) in which photographs soar since the center of the screen. As they soar, they largest zoom. Picture a flying Gallery. I have about 4 or 5 that do one after the other. I have implemented simple tween animation. In theory, it works fine, but when the image which was a PNG 150ppi of photoshop that I converted to a symbol, moves slowly outward and backstage looks jerky and slightly distorted. You can't even tell what looks like the person in the photo. I noticed when I upped the framerap from 24 to 100 (just for the experience), the image itself looked MUCH better and you can see during the whole movement, but the movement itself, the path has become choppier. In addition, to this framerate, I can't export to Quicktime due to the memory. I did a TON of animation in PowerPoint and Keynote over the years and I look forward to this kind of unpredictable be chopped of their trajectories and pre-sets, but Flash? My second problem is that no matter what I do, when I export as SWF, trial versions that were looking for clear and undistorted image during the movement seemed fine hen evenw (movement jaggedy always there) I enlarge the screen to fill to the top of my desktop screen iMac together... but when exporting quicktime If I enlarge them, the low resolution and pixelated picture looks. What should I set my file upi bigger than 1920Pixel by 1080 pixels? At the end of the day, we put this video on an intranet company for an event. The project manager wishes than the possibility of going 16:9 full screen on the users screen. Tips on how to make these movements and the image itself see without the rough, look distorted? And what kind of Framerate is my MAX if I know that it will eventually be converted by a third party and put it on the web? Thank you

  Exporting to video has become much better with a newer version of Flash you use. It would be the only practical way to get smooth cs6, a large and complicated scene animation, to export a sequence of images.

  With Animate, when you try it, you can export any animation complexity, at any frame rate and get a perfect cadence.

  Which hand, make sure that you have defined your bitmaps in the library to be Lossless and allow smoothing. Also, make sure that the quality of the scene is set for a better default (in the middle). You can place this script in frame 1, and it will improve the motion a lot:

  internship. Quality = "best";

  With CS6 that above the line will make the standard export movie be even choppier, but as I said, to do a sequence of images to CS6 in order to obtain the expected pace.

  Once you have exported perfect MOV you can then use Adobe Media Encoder to try different settings to do a MP4 is a more practical file size.

• Flash CS6 does not react and or breaks down, someone has a solution?

  Hello

  I take an online class this semester and our class requires the use of the version of Flash CS6.

  I just got the phone with the customer service and we were able to solve the problem. In fact he was doing me a favor because apparently they provide no service for Flash CS6 version and they advised me to post on the forums.

  I use an IMAC late 2013, El Capitan. The CC version works fine, but my teacher wants us to use the CS6 version, I guess it has more features. I have read the forums and have tried uninstall and update but it still keeps crashing. I need to use the deco tool for an upcoming assignment, but it makes the program crash anyway, is - it is not available in the latest version?

  in any case, the Flash is not admissible it takes forever to load and then I was advised to stop force but then when it opens in fact soon it after less than a minute it crashes.

  Help, please!

  Students in need!

  Thank you!

  Dana

  CS6 has less features in all possible ways.

  reset your preferences - http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

• Yet CS6 hangs at startup - CC2014 user (installed CS6 PP to get even)

  Anyone know why still CS6 hangs at startup?

  im a CC2014 user and had to install CS6 to get even, but it hangs just whenever I try to load it?

  T wave answered and resolved my issue in less than 5 seconds! After weeks

  ask adobe and go on the forums without anyone to help me this guy

  This sorting. He told me to run as administrator on my windows system

  and it now works perfectly

• Cannot install Flash CS6

  Hello.

  We installed the CC package on windows 7 64 bit.

  But now when I try to install Flash CS6, it is not installed.

  There is the Adobe log file message:

  22/05/14 15:53:46:328. [INFO] |  | OOBE. OF |  |  |  | 4940 | DEVersion: 5.0.0.0

  22/05/14 15:53:46:447. [INFO] |  | OOBE. OF |  |  |  | 4940 | Library loading C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll

  [4940] Thursday, May 22, 15:53:47 2014 INFO

  : TIMER: [Total timer]

  CHECK: Single Instance

  CHECK: credentials

  Load deployment file

  Create required folders

  Assuming that uninstall mode

  Search for master payload

  [4940] Thursday, May 22, 15:53:48 ERROR 2014

  DW040: The product '{BD5669B5-49FF-4490-B956-E9D7CB9B0ADC}' is not installed. Is unable to uninstall

  [4940] Thursday, May 22, 15:53:48 2014 INFO

  # Running Workflow EDT #.

  : TIMER END: [Total Timer] took 715,477 milliseconds (0,715477 seconds) DTR = 5,59067 Kbps (0.00545964 Mbps)

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s), 0 warning (s)

  ERROR: DW040: the product '{BD5669B5-49FF-4490-B956-E9D7CB9B0ADC}' is not installed. Is unable to uninstall

  Please search the service of error/warning above to find when the error occurred.

  These errors resulted in installer exit code mentioned below.

  -------------------------------------------------------------------------------------

  33 of the Exit Code:-the product is not installed, it is impossible to uninstall.

  Please see errors and warnings for troubleshooting. For example, ERROR: DW040...

  How can we solve this problem?

  clean, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6