Flash drive (memory Sticks) into any USB port of my computer is unable to display.

Similar Questions

• How to transfer photos to computer Olypus softwear to a memory stick using the USB port on the computer?

  Have a ceiling of memory 2 GB Kingston Data Traveler 100 memory stick (w) technology. Want to down load a series of photos already on computer with master Olypus softwear registration. Should what procedures I use to achieve this? Please specify all measures to achieve this transfer process. Thank you

  For the task that you describe... I do not see the need
  for the Olympus software.

  Insert data traveler into a USB port and go...
  Start / computer.

  The data traveler must be recognized as a
  Removable drive with a drive letter.

  OK... now that you know the drive letter... If you right
  Click a selected group photos or an entire folder
  You should be able to choose... Send to / removable
  Disk (? :))..) .This must copy the pictures to the data
  Traveler

  Make sure that the photos are in one or more records because
  the number of photos that you can copy to the directory root
  may be very limited. And you will receive the following error:

  "Impossible to copy the XXXX: failed to create the directory or file.

• Windows Media Player doesn't work when I plug my MP3 player or flash drive into any USB port.

  Victorinox original title: Media player closes on MP3 device.

  Recently WMP gives me the message "a problem has been...". "When I plug my MP3 player or flash drive into any USB port.  Then it crashes and I have to close it manually.  Any ideas?

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2. what version of Windows Media Player do you use?

  3. What is the full error message that you receive?

  I suggest you to rebuild the database from the Windows Media Player library. Subsequently, check if the problem persists:

  If you use Windows Media Player 11, refer to this link: you cannot view, add, or delete items in the library of Windows Media Player 11

  Hope the helps of information.

• When I plug my Galaxy s captivate phone into the usb port on my computer, it will charge the phone but will not allow sharing of information from computer phone.

  Original title: usb with smart phone problem

  When I plug my galaxy s captivate phone into the usb port on my computer, it will charge the phone but I cannot share the news from computer to phone. In fact when I click on the computer icon, it shows the dvd, floppy disks and hard disk but not the phone. I use a mouse usb and headphones and they work fine. I tried to search for devices and it does not work. I run Defender pro anti-virus software and have checked the firewall, but I don't see that his block the phone. I don't know what else to do. Help, please. Thank you

  Hi Mike,.

  Just to follow up with you on that, that very well may be the cause. Especially when it comes to mobile phones, the real cable you use is very important to have all the features when it is plugged into a computer. Where you can try a new USB cable yet, I hope that whoever is completely compatible with this phone.

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• How to fix problem with Windows vista to fail to load while a dual receiver wireless (for keyboard & mouse) is to plug it into any USB port?

  Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load.  Turn off the PC, unplug the receiver, put the machine, loads without problem.  Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly.  Device Manager does not take into account conflict of devices.

  Hello

  Thank you for keeping us posted.

  Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.

  Consult the manual of the manufacturer, to do the same thing.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Hope this information helps.

• Can I print by inserting a USB stick into the USB port of a printer?

  Hello

  I'm trying to use someones printer to print my work (I can't connect intot his computer). The printer includes a scanner and a copier and has a USB port on the front. My friend uses a similar printer to print and seems to be able to print documents that she recorded in PDF format by simply putting in his pen USB into the USB port on the front of the printer, options come for her to choose which document it wants to print and off she goes.

  When I put my USB, my USB content are not started, and I have therefore no options to print. The only option of PDF who came, had to print "USB Disk Pro User Manual". I pressed this option, and a manual began printing I cancelled. How is my friend to print when she inserts his USB pen, and I can't?

  Can anyone help with this?

  Thank you!

  The USB port on the printer is made to connect to a computer, not a USB flash key.  At least not usually.  Want to check your owner's manual to find out.

• Wireless Xbox 360 Controller for Windows all of a sudden not connect into any USB port

  Original title: Wireless Xbox 360 Controller for Windows issue.

  Hi, I bought this back in 2008 and it has been flawless since today... I tried to use it and the controller is unable to connect to the receiver.

  There is no light on the receiver, even when I plug it into a different USB port there is still nothing... I even tried another computer. I assume the receiver is nakered?. Can anyone shed some light on this?

  If the receiver is so broken, can I buy this receiver on its own and that it will be compatible with my wireless controller Xbox 360 instead of having to buy another expensive controller...

  Thank you very much.

  Hello

  I suggest you to post your questions or comments about the Xbox 360 Forums, so that you will be provided with the assistance of your Xbox 360 product.

  Link: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Hope this information helps you.

• Can I use USB 2.0 drive into a USB Port on my computer 3.0 portable g6-2235us

  Can I plug in a device of USB disk 2.0 to a USB 3.0 port on my computer laptop 2235us g6?

  Hello

  If it is a new laptop, the USB ports can be a little tight.  Try to insert and remove a device which plug into USB 3.0 ports several times and then try again the USB 2.0 device.

  Kind regards

  DP - K

• Computer laptop PResario CQ56-115DX-don't wake up - I got a memory stick in a USB port

  PResario CQ56-115DX laptop - I've been through troubleshooting and know I made a mistake in leaving the stick in during shutdown and put to work this morning. Unfortunately, the troubleshooting instructions assumes that you can see the screen. I'm on a different computer.  I shut down the computer, took the stick, has waited several minutes and turned on. At startup, it is running, but appears locked, empty screen, wireless off tension, my caplock was and still - nothnig works. Thank you.

  Hi sullbar,

  sullbar wrote:
  

  PResario CQ56-115DX laptop - I've been through troubleshooting and know I made a mistake in leaving the stick in during shutdown and put to work this morning. Unfortunately, the troubleshooting instructions assumes that you can see the screen. I'm on a different computer.  I shut down the computer, took the stick, has waited several minutes and turned on. At startup, it is running, but appears locked, empty screen, wireless off tension, my caplock was and still - nothnig works. Thank you.

  Try a hard reset first as follows:

  Remove the battery and unplug the DC power Jack
  Press and hold the power button for 30 seconds.
  replace the DC power cord (leave the battery for now), and then press the power button
  If you now see Windows on your LCD, then fine.

  Best regards

  ERICO

• How can I transfer/copy a program from the hard drive on my computer on an external hard drive plugged into a USB port on my computer?

  transfer of a program on an external hard drive.

  What exactly are you trying to accomplish (goal)? You cannot save a program by copying its files/folders in Program Files in an external hard drive. To save programs, you must save the installation - CD, DVD, or the installable executable if downloaded media on the Internet.
  MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 not recognizing memory sticks in slots USB

  Hi when I put the memory stick to any USB on the computer, I receive a message first came to ask me to format the memory stick. I even get this if I enclose my TomTom GPS on the same USB slot.   If I click on the drive designation, I get the following message:

  {{K:drive is not accessible. The volume does not contain a recognized file system. Make sure that all required file system drives are loaded and that the volume is not corrupted.}}

  I know that the sticks of memory are OK, as I have tried several and also tried all the USB slots on the computer and another computer.

  I don't remember doing anything for having caused the problem since the last using the disks of the USP.

  Using windows 7 Home premium.

  Anyone know what is the problem and how to fix it please?

  Concerning

  Windows7RULES

  Finally, I used a data recovery program.  Recover all files and files downloaded from the sticks of memory on my hard drive.  Formatted in NTFS and I am now able to use chopsticks as well as my recovered data, the sticks of memory.

  All sorted

  Concerning

• Is there a way to connect my DV camcorder to my usb port on the computer instead of a 1394 port, that my computer doesn't have?

  My Canon Elura 100 DV camcorder has a usb connection, but Windows will not recognize it when it is plugged into the usb port on my computer.  (The manual Elura says to connect it to a 1394 port)

  Hello

  According to my research, you must use the supplied canon DV cable and use it. Many users is connected it correctly with the usb port. I recommend you contact Canon support on that.

  http://www.Canon.com/support/

  I hope this helps.

• Had an accident and I want to import my favorites into Firefox but the only option in the Import Wizard is that is my B/brands are saved on a memory stick. Any solution please. ?

  Had an accident and I want to import my favorites into Firefox but the only option in the Import Wizard is that is my B/brands are saved on a memory stick. Any solution please. ?

  How bookmarks are stored? If they are in an HTML file, you can go to bookmarks > organize bookmarks > import and backup > import HTML, select "in a HTML file" and go from there.

  If you have not currently saved favorites and b / m to import is already in a FF bookmarks file you could just more copy to your profile.

• I have a Logitech USB 350 and Windows 7 headphones not not even seen in any USB port

  Recently, I built my new system and installed Windows 7 Home Premium 64-bit.  I was using my Logitech USB Headset on my previous bench which was under Vista without any problems.

  After all the installations and updates, it was time to see what games and Movies looked and sounded like.  I plugged my faithful helmet in a USB slot... and nothing happened.  And I hear nothing.  My system is not same recgonize that nothing is plugged into the USB port.  I tried other 8 available USB slots and got the same results - absolutely nothing.  And Yes, all the slots work. Connect any other device (external hard drive, Memory stick, etc.) each any every site works very well.

  Plug the headphones on another computer running XP. It is recognized and works perfectly.

  Back to my new PC, open the control panel with the connected headset and go to the appropriate screen - I see my speakers and Realtech Audio, but no helmet, no unidentified device, nothing.

  The compatibility section of this web site confirms that this helmet is AOK with Wndows 7.

  So, anyone have any ideas?  Any help is greatly appreciated.

  I'm having the same problem. Never understand you a solution?