Flash on DMP4310 recovery
Hello
With DMP4400, I was able to play flash SWF files. But it was not very good if the file contained a few heavy animation such as transitions of type Power point.
My question is about DMP4310G. AFAIK, it supports animations Flash Light. Does this mean we can play normal flash SWF files? If there any try?
Thank you
Hello!
This model supports "Flash Lite 3.1" as described in the data sheet. Flash Lite is a simplified version of flash designed to run on mobile devices or low power. It is not compatible with all the features of flash.
The main features of Flash Lite 3.1 are:
- ActionScript 2.0 support only
- compatible with Flash player 9
More information about http://www.adobe-flashlite.com/ , http://en.wikipedia.org/wiki/Adobe_Flash_Lite or http://help.adobe.com/en_US/flashlite/dev/2x3x/WS5b3ccc516d4fbf351e63e3d118d293d38a-7ffc.html
I found that in CS4, you can check if your flash file is compatible with Flash Lite 3.1 using an emulator: http://help.adobe.com/en_US/flashlite/dev/2x3x/WS5b3ccc516d4fbf351e63e3d118d293e4ad-7fd5.html
A simple test is that Flash Lite 3.1 is also used in the "Internet channel" on the Wii, so buy one for testing.
I hope it's useful for you.
Best regards, Peter
Tags: Cisco Support
Similar Questions
-
Satellite L300D-13s - how to create a Bootable USB Flash for Vista Recovery drive?
Hello
Has anyone ever created a Bootable USB Flash of their Vista HARD disk recovery drive? If Yes can you help me create mine? I know that you can do for the new OS and that Toshiba provides a tool for this.
Thank you
Something like this is not possible. I have older machine tool and I can confirm that recovery USB media cannot be created DVD only.
-
Creation of Flash UDB disk recovery disk
I have a Compaq CQ10-500SA which has Windows 7 starter edition preloaded.
I tried to create a recovery to a new 16GB flash disk disc using HP recovery media creation.
This process did not work on the first attempt and the message said I should try again.
I tried a second time, but I don't know if it worked or not.
Is it far from clear if the recovery USB disk is working properly? (How I would use anyway?)
Your advice would be much appreciated.
Try to start the computer from the flash drive. It should bring you to a menu with dining options. Make sure that you can select the USB from startup to startup options. You may have to say try the USB key before going on the hard drive of the computer.
If you tell him to boot from usb and it does not work, you may be able to rerun the utility of creation. Try formatting the USB key before trying again.
-
Size of the flash drive for recovery of windows 8
What size flash player do I need to create recovery windos8 media
Hi Patricia,
Thanks for choosing Windows 8. We are pleased that you have filed this request in the Microsoft Community Forums!
According the description, it seems you are trying to create a bootable Windows 8 recovery disk using the USB flash drive and wanted to know the free space that the flash player should have to create. Let me know if I'm wrong.
To create a recovery disk bootable Windows 8, the drive must have at least 3 GB or more space free available in.
I hope this helps. Feel free to get back to us for further questions on this.
Thank you.
I created a station of recovery on a 64Gb SD card. It uses 33.318.338.560 bytes (31 GB) I assumed that it does not fit on a 32 GB memory card, so should look like 'less 36 GB' response? (a 32 GB card holds only 28 GB normally)
-
Flash Windows Vista recovery disk
I have a Dell Studio One 1909 all-in-one computer with Windows Vista. I'm trying to start but it but it gives me an error 0xc000014c. I looked through the disk which are:
-Roxio Creator 10.2-Dell Application: Reinstall the software Cyberlink PowerDVD DX 8.1-Dell Application: FastAccess facial recognition reinstalling-Dell Application: Reinstall Dell TouchCamGiven my situation, I doubt that he will help me. The other disc 2 are:-Dell Drivers and Utilities: reinstallation of software of computers Dell Studio 19-Windows Works 9My disc charger does not work because of my nieces, thinking it was hunger and feed cat food, so I thought that I can do a restore by using a flash player. I tried to download an iso of restoration of the Download Center: https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/15074/eng/RCDv30b514.zip&lang=eng&Dwnldid=15074When every I try to use it with the WIndows 7 USB/DVD tool won't say this is not verified. I reformatted my flash drive which is 1.8 GB and the file is only 204 MB.Hello
I hope that these links should provide an explanation for all of your problems:
Reference Dell troubleshooting with startup problems:
Run the built-in diagnostic software:
See you soon.
-
Flash player 14 - recovery install does not
Hardware: Macbook Pro 2008
2.4 GHz Intel core 2 Duo
4 GB of Ram
OS: 10.9.4
Whenever I have launch and run the installation of dmg, he said get install but remains at 0% and the said application is not responding.
I tried to uninstall Flash player and have verified that:
- / Library/Internet Plugins/Flash Player.plugin file is not present;
- Flash Player installation manager is not present;
- Restarted the Mac; and
- The repaired disk permissions.
But I still can't Flash player install. Can anyone suggest anything else to try?
Use http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g
-
Lost Annimation - save it as Flash CS4 CS3 - recovery options?
My son and his friend worked almost 24 hours straight during a project for school. During the wee dark hours of the night, they added the bits of motion to their annimation. The school uses CS3, the only version that we could buy CS4. So, they saved their project as CS3.
Now, they see a warning, "objects of movement will be lost." So all the work they put in a missing?
Is it possible to recover their work?
They thought they were almost done, and now they are in several hours, when they began to add motion? There must be a work around.
Tired, frustrated and beatsthey have to hand in the FLA and the fla should it be editable by cs3? If this is not the case, they can publish their swf and it will play well with flash player 10 (which is free).
-
I have a compaq presario windows vista laptop does not accept the installation. Can I create a flash of my recovery disk recovery? Help! I'm not savvy in computer science. Just need help. HP support has been, until I said no to the help of a lot of money.
Thanks for any help you can provide.
No, you download and save on your hdd_in any folder, where you can find it as 'Documents', etc. Once the loan of USB Flash drive, click the usb file to create the recovery in the flash player.
If you already burned a set of recovery discs, you probably need to reset recovery creator software before performing all of the usb:
http://www.ehow.com/how_6671484_reset-HP-recovery-CD-Builder.html
-
Increate a recovery flash drive
Hello
Some time previously, I used the recovery disk creation wizard to create a recovery disk Windows 8 on a 16 GB USB key. I would like to now "uncreated" it. In other words, I won't use the flash drive for recovery. I want to erase all the recovery disk creation wizard did for her and have a plain old vacuum USB key that I can use for purposes of common storage. What, if anything, would be I have to do to get there?
Thank you very much!
Go to this PC
You can find the USB-perhaps, he named something like 'removable disk '.
Right-click on it, and click Format...
You still have the hard disk recovery partition? It MAY be necessary to reset the PC, if something is wrong in the future...
-
Toshiba HDD Recovery on NB520 - 10 p
Hello
First of all, I apologize for my bad English level.
I have the same problem like this:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031
I tried to download the hotfile.com files but not online,
Could someone give me a link to download the files and create the usb to restore my netbook nb 520 - 10 p factory default.
The recovery menu does not work properly.
Thank you all.
It seems that the link is no longer valid.
But you have the recovery of files on your HARD drive recovery partition?Where the files are still present on the HARD disk, start the Toshiba Recovery Media Creator and create the USB flash memory stick recovery.
You can then use this USB key in order to recover the laptop.In case this isn't possible, you can always order the disc of recovery from this page:
http://backupmedia.Toshiba.EU/landing.aspx -
New Satellite P50 - A but no CD/DVD recovery
Hello
The new portable does contains recovery dvd or something like that!
Before the years there was recovery DVDs or files of information retrieval are on a drive then I burn.
This time. I wonder how if my windows 8 crashes and need to re - install! , or relax all original factory data! How can I do it!Kind regards
Toshiba (and as far as I know a few other laptop manufacturers) don't provide any recovery disk in the package.
For the most part, you create this collection yourself by using the media of Toshiba recovery disc Creator called preinstalled software. Check your pre-installed programs.For Toshiba Recovery media creator allows you to create the recovery disk (3 DVD) or a flash memory stick recovery (I assume that you will need a 16 GB USB key)
-
Portege Z830: Create the recovery and removal on SSD USB recovery partition?
Hello
I already found a lot of discussions around the question how to increase free space on the SSD drive.
Is it possible to remove the recovery partition after you create a recovery key USB with the tool 'Create a Toshiba Recovery media'?
No risk?If it would be possible, how it is possible to assign the space gained on the C: partition?
Thanks in advance for your advice!
> Is an option to remove the recovery partition after you create a recovery key USB with the tool 'create a Toshiba Recovery media "?
> No risk?Well, the recovery partition would create again when the laptop recovery procedure using disk recovery or the flash memory stick recovery
So if you want to remove the 2nd partition, you must create this disc/USB stick recovery before changing something on the HARD drive.
-
Satellite L655-149: recovery does not work with the new HARD drive
Satellite L655-149
PSK1JE
Windows 7 Home Premium 64-bit (factory installed)
Recovery of HARD drive on drive D (factory installed)
My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.
I created USB Flash HARD drive recovery.
When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.I've updated the bios
I loaded by default in the bios
I changed the SATA AHCI mode to compatibility IDLEassistance in this regard will be highly appreciated
Set the BIOS to the default settings and try again.
With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx
By the way: do you use that stick of recovery for the first time?
-
G50-45 with Win Onekey Recovery 8.1 8.1
I'll be back just from the loop of the no / diagnosis your loop of death PC...
So now, I need to make a backup of onekey recovery now that everything works again.
When you try to use my sys partition OKR is too large for the recovery partition, so I tried to use the external which has plenty of room (3 TB), but I can't click start because it is grayed out. This is an external USB 3. Should be bootable or something?
My other problem is that in my efforts to make sure I had the latest version of OKR, I inadvertently replaced that he accompanies with (8.1) (8.0)...
It was a yellowish theme, now it's blue on the theme. The file that I installed was okrw818002105.exe.
And it will not let me backup externally.
Any idea on how I could return my original OKR 8.1?
N °
N °& No.
Solved the problem of 8.1 OKR myself. It turns out that the configuration for 8.1 which was preinstalled on this Lenovo was still on drive D and he's back the way it should be now.
Always impossible to go to the 3TO with OKR 8.1 if... Probably for the reasons you mentioned on TPG and all.
So I spent the day pass given to she who brought the Sys partition up to 101 shows. Still does not fit on the recovery partition which is only 23 concerts, so I'll use my 128Gig USB 3.0 drive Flash for the recovery DRINK for now.
Thanks again for your response.
I'll post here if I have more questions.
Just a note aside, only thing that wrecked was the Boot Record, all the data was very well.
I had just run the Windows Update earlier in the day before it crashed and locked up.
So once I could get fix the screens I rode back to the restore point just before the update of Windows.
I tried the Bootrec reconstruction but there not to see the Windows installation is is TPG and not MBR, so I had to do the letter assignment drive using diskpart and all via the command prompt and then he was able to rebuild very well. Once this is he's right, if it took a while to rebuild his base for the menus and controls icon.
This site is a godsend and where I got my directions and strategy to do this:
https://www.WinHelp.us/repair-your-computer-in-Windows-8.html
It might be useful for someone else with the loop of your PC not / diagnosis...
So happy that I have not lost anything but some sleep and time.
See you soon!
-
Recovery Acer Iconia W700 problem
Hello
I W700 Iconia tablet, and I'm trying recovery it.
With the Tablet, I have some recovery disks. I copied the DVD 1 DVD Recovery 2, System Recovery DVD 2 of 2 USB flash drive. Recovery is up to 99% and then it says I should put Recovery DVD 2 of 2.
I don't know what to do.
Can someone help me?
Thank you
I solved my problem! I bought an external dvd drive and it works with it.
Maybe you are looking for
-
Whenever I opened my mail, my computer crashes. do not move cursor
Whenever I opened my mail, my computer crashes. do not move the cursor. I have to cut manually the computer and restart.
-
I started ftp - ing fw_7.220.2 to a 10 (64-bit) Windows CP4025 nearly two hours ago. The printer says "receiver upgrade" screen, th prompt commands on the computer is not yet at the command prompt. Should I give up? If so, how can I go about safely
-
I went to control its embedded on my micro hit some button that met my speakers or my microphone, now there is a terrible noise of comign out of my speakers and my computer went to a blue screen that says something about a crash dump it please help I
-
Boolean type def button.
Hi, I'm Korean. my English is "whatever. That's why I'm sorry. first of all, I want to do Boolean button type def. This isn't a problem. but make triangle shape. case of problem. Like this Red box is notihing. But if I click there, it is change to tr
-
How can I configure my printer HP Deskjet f4400 to print wirelessly with my Mac osx?
I am able to print entirely specific wireless with this printer or do I connect to the computer via the usb cord or router when I want to print?