FlashCards will not start on Vista

Similar Questions

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Pre installed Vista on iQon will not start. No available disk. The manufacturer had to cease their activities. I have the product key for Vista. Buy a Microsoft store repair disc?

  IQON laptop manufacturer had to cease their activities. Pre installed Vista - no disc. Vista will not start. Unable to access restore or recovery mode.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  And Microsoft sells more than Vista.

  Try this:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to the website of the manufacturer of your computer (In your particular hardware manufacturer case) and get the latest drivers for your particular model computer or laptop.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If you want to try the Startup Repair tool, read this information:

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• using Windows vista and supported will not start

  Windows vista help and support will not start. Is it possible to download and re - install this feature.

  In addition to the guidance of Kim, I also recommend looking at responses MVP mind x here.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

• Re: Satellite L300-1AS will not start

  Hi all

  Now my L300 will not start not (windows (Vista).
  It shows a blue screen saying that windows has been shut down and to check the installation of new hardware or software.
  There is no new hardware or software. He suggested to disable the bios memory options (I don't know how to do this) and suggests to start in safe mode to remove or disable components.

  The laptop does NOT start in any mode not to mention safe mode, repair mode that brings back me to the blue screen as described.
  I bought a Toshiba Recovery disk (a single disc happened?) that begins its process then two locks of "select a language to move forward" or detects an error and request I have "press any key to continue' what I'm doing, it then displays X:\windows\system32 > with the cursor flashing at the end of > and does nothing more , its been like that for 5 hours now... I'm supposed to type something in or I am looking at a new hard drive?

  Suggestions for a greatly appreciated numpty (outside to let computers alone numpty you of course!)

  Thanks

  Colin

  Hello

  Yes, the recovery disc's one disc it s DVD ;)

  Return to be issued;
  I think that it s material related since the recovery disk should work for sure.
  The blinking cursor can be related to a faulty memory or HARD drive.
  Both should be checked.

  You could remove a memory module and might try to power the device using a single memory module in a slot.
  Of course, the best would be a use of two new modules

  The HARD drive can be checked using a tool called Drive Fitness Test (it of free use google to find it)

• Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

  When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

  I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

  I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

  I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

  Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

  I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

  I am at a loss. Help, please.

  Thank you

  Kevin

  I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

  You must also update the BIOS.

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

  system will not start, I have not connection wired, software was on the laptop at the time of purchase.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• copy / paste will not work on vista

  Copy / paste will not work on Vista

  Copy / paste will not work on Vista

  Do you remember when was the last time copying and pasting worked?
  It would be not less than 15 days ago?
  If so, to make a system restore?  Choose the date where the copy/paste functioned as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Acer asl3600 will not start only get option is F12 and no data on the recovery drive.

  Hi guys have Acer asl3600 will not start only option get is F12 and no data on the recovery as disc was in vista family 32-bit premium version devastated as being disabled and need for my community work & charity, thought best option would be a recovery disk.

  Concerning

  Dennis

  Hello

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Acer definiterly only reinstall to factory settings, new condition.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.