flashing power LED, interrupted Firmwareupdate? N900 WNDR4500

Hello

a few hours earlier, the N900 router lost connection to the modem for a few seconds. It happens all the time, so I stop the router and then turn it back on.

Now the Power LED blinks green all the time. I have red, this could happen if a firmware update is interrupted. Now I don't know what to do. I tried to reset the entire router, but router does not restart after pressing the button reset for 10 seconds (I wait 10 min now).

It would be nice if you canhelp me

Best regards

Nils

No, I can't ping the router and I can't open the URL 192.168.1.1 / 192.168.0.1

not even the modem can find the router.

We use an easybox803a by vodafone as a modem. The thread of this box is really bad, we have the netgearrouter spending range. the N900 is connected to the lan boxes easy port.

Tags: Netgear

Similar Questions

  • Satellite A200-1ZF starts not flashing power led

    Hello

    Today, my laptop Satellite A200-1ZF wouldn't start, instead, my power led flashes orange-orange-blue-orange-orange - blue and so on and so forth.
    The HDD led transforms the blues when I turn on the computer and seems to work fine (I hear the normal sound of market from the HARD drive).
    I tried to remove the RAM module to see if there is a fault in one of the modules, no help. I tried removing the battery and it works only on current alternative, also no help.

    Anyone have any idea?

    Hello

    I'm a bit confused of m.
    If I understand you just your laptop starts up but screen is black or how figure you?

  • PORTEGE T3600CT: Flashing power LED

    Hi everyone (forgive me of my English).
    I have a problem whit my PORTEGE T3600CT (Yes, a bit old... but I like it) when it s connected to the power supply.
    It looks like overheating of the microprocessor or something else: after a few minutes (5, 15, 30... it s never the same) the computer draws downwards, the power led turns amber and flashes 4 times aprox. 5 seconds, and then stays off for 3 seconds. It is the cycle: 4 flashes, broad of 3 seconds, 4 flashes...
    I put t knows what it means, cause I put t have the manual. If anyone knows, please help me.

    Thanks to you all.

    Maximiliano

    Hi Max

    AFAIK, it flashes code. Happens if the power supply microcontroller detects some hardware fault. Please use the virtue and advanced research search terms put the blink code. You can see that there are a lot of topics on this subject. If you wish, you can read some useful comments.

  • Acer Aspire S7-392 lights flashing power led

    Yesterday when I tried turing my S7 on it would not turn. Power led kept flashing. so I plugged it to think of HQ, there lack of battery, but the result was the same.

    After reading some post online I reset the battery, he turned. I quickly took my working backup because it could happen again. And today it turned out I was right.

    I've tried so far things:

    • reset the battery from the back.
    • removing the battery from the inside and with the power for 30 seconds
    • FN + f12. does not not, as soon as the key is pressed, it begins to blinkg
    • read a few post on flashing the bios coundn't find the right way for s7-392 so tried of s7 - 391. bios donwloaded. It extracts. copied to USB. held fn + ESC and then turn it on. did not work as soon as you press power button / stop led continues to Flash

    I tried it didn't work. I decided its time I put it in the trash. The thing has been in and out of the repair shop, over 2 years. I never had cell phone that easily beat without fault of the user.

    Did you know that the first time, I bought this 3 weeks speakers stopped working. After 2 months, every time I turn it on it disk check-up. and all died within 6 months. It was under warranty so he sent to acer repair workshop. He come back every thing worked initially. but in the first enclosure week has stopped working again with 1 usb port. within two years, I've had it already spent enough for a new ultrabook.

    Even though my friends said acer is not a well, the thing seemed so nice, so bought some anyway. I learned my lesson will never buy an acer product.

  • I have a router Linksys WRT54G, a flashing power LED, and it does not connect what either. I downloaded a bin file from Linksys, but cannot open it. Can anyone help? I try to get another computer running for my children. Thank you

    The router will not connect to my computer. He repeats to me check the connections. They' fine rev.

    Hi Tweetytewe,

    This occurs on cable connections and wireless? If this happens on cable connections and wireless and your Windows installations are fine, you should contact linksys support to receive the best support.

    http://www.linksysbycisco.com/US/en/support.

    I hope this helps. Let us know if you have any questions.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Satellite L455 - plug-and - battery LEDs power LED and it flashes orange

    I have a Satellite L455, which worked perfectly for more than six months now, but two weeks ago he began to behave strangely.

    I turned off the machine normally in the evening I was going to sleep. In the morning when I turned on it it turned on, HARD drive and on power LED blinked blue for a few seconds then they are gone. Machine does not start. I tried to turn it on again and it does the same thing. Then I saw the "power plug on" and "battery on" LED flashes orange at the same time. I unplugged the power adapter. Both lights were continuous blinking but machine will not feed. I removed the battery for a piece of 5 minutes, then reinserted it and the machine has worked all day.

    I went he deleted off the power plug and the morning again it wouldn't start until the when I removed the battery for a few minutes then it works again. The battery recharges very well that when I remove and reinsert it even without connecting the power cable still lights up and works perfectly.

    Then, I removed the battery and the power supply Plug and you press the power button for 30 seconds to unload the machine and then return power and battery and it worked until I turned off again and shutting off the power and then it didn't once again.

    If I stop just of machine and do not turn off the power cord, then I can turn it back on to and work with the machine without hassle even for three days without interruption.

    What could be wrong? Any help will be really appreciated.

    Concerning
    Yusuf

    Hi chidzungo,

    It must certainly be a hardware malfunction but he s strange why it pops up every day after you have closed the laptop. Do you use batteries and AC/DC to original Toshiba adapter? Have you connected external devices to your laptop? If so delete them before you turn on your laptop.

    What version of BIOS is installed at the moment? You should look on the Web from Toshiba website for an update. Update of the BIOS might also help and it s worth a try.

    Before you start reading the BIOS BIOS update instructions update [HERE: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60]

    Satellite L455 seems to be an American model, so the BIOS update can be downloaded from the Toshiba U.S. page but first check the exact part number:
    http://www.CSD.Toshiba.com/

  • Portege R100 stoped working - the power LED flashes error codes

    I have a R100 that has suddenly stopped working.
    The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

    That - what it means, and where can I get a list of all codes error?

    I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

    I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

    Thanks in advance.

    Hello

    I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

    In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
    Here it s only a user to user forum and I have never seen anyone from Toshiba again.

    Anyway, here you can search for the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good luck!

  • Yellow flash - Satellite Pro 6070 DC power led

    I have a Toshiba laptop that I got from a friend, when I push the power button that flashes a green light as if it's going on, but then the DC power led starts flashing yellow. I have looked this up, but wanted to make sure it was good...

    I thought he had 3 batteries on the cell phone the main bios one and another one. I looked at other newspapers on here and tried to run right next to the power, but the same thing happens.

    How would he fixed or what could be the problem?

    Hello

    It dose not sound very optimistic the domain controller IN the witness lights usually green when DC is supplied from the AC adapter.
    But if the output voltage adapters is abnormal or if power outages, this indicator flashes orange.

    Either there is something wrong with electronic power supply on the motherboard or adapter AC is defective.
    I think it s the first possibility and in this case I n t think you will be able to fix it yourself.
    I'm afraid the technician advice and help is needed: (m

  • Tecra A2 power led flashing

    After an accident of liquid my Toshiba A2 PTA20E-4LV03LG3 has stopped working and when I plug it into the AC or just battery power led turns green for a second and then it turns orange and start flashing (* L * NGOs 1 sec, * S * ort half dry, * L, S, S, L * and * S *). Anyone know what this means? I think that my motherboard is damaged :|

    Post edited by: paolo6

    > Is - anyone know what this means? I think that my motherboard is damaged

    I fear that you might be right I put t m know that this kind of code could say because it's always different, but either you memroy modules are dead or motherboard.

    It's a pity :(

  • IdeaPad U310 tactile power led flashing

    Hello

    I just noticed that the power led of my touch u310 flickered continuously. The led on the power button also flashes constantly. The flashing happened even after I shut down the computer. The only time wherever the lights flash when I disconnect my ac. Anyone know what could be the cause of the problem?

    Thank you

    It turned out that I disabled the smart update of lenovo and my problem went away.

  • HP mini 1109tu does not illuminate and has its power led flashing

    Well I just got my Bill Mini of the day the following day and while they were inspecting it this morning the power led flashes and it won't turn (even on the battery mode).

    [IMG] http://i168.Photobucket.com/albums/u171/Arnaehl/img_96221_hp-1000.jpg [LINE]

    Will or may someone help me solve this. I can't bear to look at my dead minis.

    Thanks in advance.

    HP mini 1109tu

    Hello

    Arnaehl wrote:

    Well I just got my Bill Mini of the day the following day and while they were inspecting it this morning the power led flashes and it won't turn (even on the battery mode).

    [IMG] http://i168.Photobucket.com/albums/u171/Arnaehl/img_96221_hp-1000.jpg [LINE]

    Will or may someone help me solve this. I can't bear to look at my dead minis.

    Thanks in advance.

    Try a hard reset.

    Disconnect the electric plug. Remove the battery.

    Press and hold the power button for 15 seconds.

    release the power button.

    Plug the AC adapter.

    Press the power button.

    Best regards
    ERICO

  • HP Jet 11: 11 flow does not illuminate. Power led flashes 3 x

    I am trying to fix a 11 HP flow for someone and I'm running into some issues here.  Basically, the computer does not light and the power led blinks three times.  I did all the options to reset that I could find online, and the power brick works.  The person said that she may have fallen, so I think this has something to do with that don't turn only not on.  No idea what the three blinking lights could mean in this case?  Thank you.

    Hello

    Flashing codes mean.

    1 blink = CPU does not

    2 flashes

    -L' laptop can load if given enough time.

    -If the laptop starts to load, try to start the BIOS of several times the ESC key until the Start Menu appears. Press the F10 key to enter in BIOS

    > Started the laptop?

    -Yes. The laptop started

    -No, the laptop is not started. At the moment, it seems that the BIOS is damaged.

    3 flashes = Module of Ram error

    4 flashes = failure of the graphics card

    5 flashes = hardware failure

    6 flashes = BIOS authentication failure

    I hope this helps.

  • Qosmio X 500 does not start and the power LED is flashing every 5 seconds

    Hello
    I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

    If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

    I tried to:
    * Remove battery and power up with AC only
    * power only to batteries
    * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

    but it did not help.

    I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

    No idea where could be the problem?

    Thanks for help
    Frantisek

    Hello

    The failure of RAM could be the reason for this behavior of the laptop.
    Remove the RAM modules with good modules tested and check the functionality of the laptop.
    In the case of RAM isn t the troublemaker, the motherboard could be affected.

    Good luck and share your experience with us.

  • Satellite R840-139 - Power led blinks

    Hello
    Sorry for my bad English :-).

    a computer whose power LED flashes orange. I tried to read the error code is 01001010 = 4 Ah. I think my computer has a bit of a shock, but I'm not sure. It would be a failure but 3V but which?

    I tried to press and hold the power for 30 seconds and reconnect the power supply and the battery and nothing changes. I measured the voltage charger is about 19V.

    He had already put in this fashion several months ago, but has restarted.

    What can I do?

    3V resembles the RAM. Try a different RAM module.
    If it still does not respond, it may be a faulty motherboard.

  • Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

    A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

    I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

    To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

    I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

    The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

    Your thoughts will be greatly appreciated...

    WTF?

    What is an unmoderated forum?

    Can someone help with my problem?

Maybe you are looking for

  • GarageBand 10.1.1 update, can't see all the logic instruments

    Before joining Garageband 10.1.1 I could see and use all the instruments of my logical instrument library. After this update, I can't. For example, my guitar options are now limited to: But logic offer this (and until the upgrade, I think that Garage

  • Apps - slabs

    I just got an Acer aspire V5 - 122P and I'm learning how to get around the new system. I'm not sure whether this is possible but when you use the tiles I typed on the store and I want looking for an application like I can on my tablet. You saw that i

  • XP to Win 7 set at level OK. A 80 GB with 20 GB C and D Partitions 60 GB drive. Which Partition is active? Can remove Win subdir on another Partition?

    I have a Dell 745 with XP to Win 7 installed OK. The 80 GB hard drive has a partition C of 20 GB and 60 GB D partitions. The two partitions have a Windows subdirectory. If D is the active partition, can I remove the Windows subdirectory on the partit

  • can't ping network CUE

    New installation of CUE in existing CMF; can ping the CME CUE, but not network. Solve the docs say to make sure that the QUEUE's default gateway is the CME, which he is. What might be missing? Here are my relevant config (CME is 192.168.1.27 and CUE

  • After the package in refactoring viewController

    Hi allI use Jdev 12.1.2.0Recently, I have re-taken into account a package in my project of ViewController and renamed HelloWorld helloworld (all lowercase letters)This package contains backingbeans and some pagedefs. I checked all the references in t