Flipping AND remote overview?

Similar Questions

• The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

• Internet and Remote Desktop disconnect

  Hello

  I have 4 servers connected to the DMZ, all currently running Windows Server 2012, one of them is a domain controller, and one for the web application (GIS)

  The problem is that when I connect to a server called (GEO) to DMZ then internet and remote desktop to become stable and disconnected.

  I formatted this server several times and the problem still exists.

  What could cause this problem?

  Sorry for the bad language.

  Hi Peter,.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

  Hello

  Good evening everyone.

  I had a problem in Routing and remote access on windows 2003 server.  This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.

  three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24

  Three cards of the NETWORK adapter installed on the server as with the IP - next

  NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.

  NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)

  -3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.

  Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...

  So, how do I access the internet to another two network also?

  I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?

  Here is the result of the current track...

  D:\Documents and Settings\Administrateur > route print

  IPv4 routing table
  ===========================================================================
  List of the interface
  0x1 ........................... MS TCP Loopback interface
  0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
  niport
  0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
  iniport
  0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
  2 miniport
  ===========================================================================
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
  192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
  192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
  192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
  192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
  192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
  192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
  224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
  224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
  224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
  255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
  255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
  255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
  Default gateway: 192.42.161.112
  ===========================================================================
  Persistent routes:
  None

  Sorry if I'm not able to explain properly. Please let me know if you have to explain more about it...

  Thank you all.

  Mahesh

  Hello Manu,

  Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• The Routing and remote access could not start, error 214500037 (0x80004005)

  My windows server 2003 r2, failed to start the Routing and remote access services. And in the event an observer log, it has error code
  Event ID: 7024, with service specific error 2147500037 (0x80004005)
  I tried to reset tcp/ip and replace ias.mdb and dnary.mdb by a new, but it did not work.

  Thank you

  Hi budhihartono,

  Since you are facing problems with windows server 2003 r2, it would be better suited in the Technet Windows forum. Please post your question in the following TechNet Windows server forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• A WLC headquarters and Remote Site

  Hello

  I have a question for the WLC remote deployment.

  For the moment, we have the following design:

  Head office

  -Network 192.168.49.0/24

  -WLC 4402 Version 4.2.61.0

  -3 x LAP1252

  -LWAPP layer 3

  -Wep SSID

  -Wpa SSID

  -Windows PDC with Active Directory, DHCP server and data storage local

  -ACS Version 3.2 for RADIUS and RADIUS authentication--> external DB to Active Directory

  Remote site

  -Network 192.168.50.0/24

  -2 x LAP1252

  -Wep SSID

  -Wpa SSID

  -Windows PDC with Active Directory, DHCP server and data storage local

  -ACS Version 3.2 for RADIUS and RADIUS authentication--> external DB to Active Directory

  Connection between the seat and the Remote Site

  -2 Mbit ADSL

  The problem is, wireless on the remote site clients get an IP DHCP 192.168.49.0/24 Beach headquarters. Users at the remote site

  most of the time only using the local database server in the remote offices. With the actual design connection ADSL 2 Mbit passes traffic hole the

  WLC at Headquarters and at the remote site. It works but it is not that efficient.

  The problem could be solved with HREAP, but what I think is, that it is not possible to have the same SSID to Headquarters and remote site with different VLAN.

  How can I achieve this, the clients at the remote site to connect to the same SSID (wep or wpa), get an ip address from the remote site (192.168.50.0) DHCP server

  and the traffic is enabled locally.

  I hope that you understand what is the problem.

  Thank you in advance for your help!

  Yes, putting the HREAP remote access point mode will allow the WLAN even to be available on the access point but the traffic could tip locally to the AP instead of in the tunnel to the controller. After the AP mode HREAP you re so what VLAN you want traffic for each WLAN to immerse on for this AP.

• Site2Site and remote VPN

  I have a site2site between PIX506 and 877 router VPN. Site A has PIX506 and Site B router a in 877. I configured site2site VPN and it worked fine. I also configured remote VPN on PIX 506 so that the remote user can access A site. But when I configure remote VPN on PIX506 site2site VPN works and both sides can ping each other. But site B users cannot access any resource network or application of the SiteA while site A can access resources of site B. After removing remote VPN site configuration B can access the resources of the Site I joined the configuration of the two sites. Someone help me please site2site and remote VPN work at the same time.

  Please forgive me for not reading every line.

  an add-on quick about the pix configuration:

  change "isakmp key * address 213.181.169.8 netmask 255.255.255.255" at "isakmp key * address 213.181.169.8 netmask 255.255.255.255 No.-xauth No. config-mode.

• WebVPN and remote VPN access

  Hello

  Is there a difference between WebVPN and remote VPN access or they are the same.

  Thank you.

  access remote vpn consists of

  -IPSEC VPN remote access. It is part of the ASA, no permit required, requires pre-installed Client from Cisco VPN IPSEC on PC

  -with AnyConnect SSL VPN remote access. It requires licensing of SSL VPN on SAA. AnyConnect client can be installed automatically on the PC with the launch of web.

  -with Essentials AnyConnect SSL VPN remote access. Beginning with ASA 8.2 (1), almost license $ 0. It's the same AnyConnect client as in the previous article, but it cannot be installed automatically with the launch of web. It must be previously installed as of Cisco IPSEC VPN client.

  -webvpn aka clientless vpn. It is a portal HTTPS which allows HTTP connections, file sharing, telnet, RDP and much more (with smart tunnels) resources without having to install a real client on the PC. It requires licensing of SSL VPN on SAA. It cannot be used if "AnyConnect Essentials" license is activated on SAA after 8.2 (1)

  Kind regards

  Roman

• WebVPN and remote vpn, ssl vpn anyconnect

  Hi all

  Differences between webvpn and remote vpn, ssl vpn anyconnect
  All require a separate license?

  Thank you

  Hello

  The difference between the webvpn and SSL VPN Client is the WebVPN to use SSL/TLS and port

  send through a java application to support the application, it also only supports TCP for unicast traffic, no ip address

  address is assigned to the customer, and the navigation on the web in the tunnel is made with a SSL

  Web-mangle that allows us stuff things in theSSL session.

  SSL VPN (Anyconnect) Client is a client of complete tunneling using SSL/TCP, which installs an application on the computer and

  envelopes vpn traffic in the ssl session and thus also an assigned ip address has the

  tunnel's two-way, not one-way.   It allows for the support of the application on the

  tunnel without having to configure a port forward for each application.

  AnyConnect is a client of new generation, which has replaced the old vpn client and can be used as long as the IPSEC vpn ssl.

  For anyconnect licenses please see the link below:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  Kind regards

  Kanwal

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• The upgrade to Cisco ACS SE and Remote Agent

  Hello

  Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2.

  I am little confused with information available for upgrade scenarios. Appearing on the current working versions.

  Cisco ACS SE - version 4.1 Build 23 5 Patch 1

  Cisco ACS Remote Agent version 4.2 (0.124)

  The new operating system will work on 64-bit, I think that the current ACE SE and the remote agent can / must be upgraded.

  My existing versions, give the possible scenarios of upgrade available for me. After that upgraded SE and Remote Agent should work for the 64 bit OS.

  Thanks in advance!

  Yes, it is not possible to upgrade the ACS ACS 5.2 existing to level 4.1. They are two different boxes run on a different platform.

  Unfortunately ACS 4.x does not support windows 2008 r2.

  5.2 ACS is the only option left, and you will need to buy a new box of seprate with the new licnese for this.

  Concerning

  Bellefroid

  Note the useful messages

• Can the Windows Flip and Flip 3D add to Windows 7?

  If there is anyway to add these features to Windows 7, please let me know.

  See the following topics:

  How to Geek: Http://www.howtogeek.com/howto/windows-vista/disable-flip3d-in-windows-vista/

  Also: http://www.sevenforums.com/tutorials/2694-switch-between-windows-flip-3d-shortcut.html

  What you can do with Windows Flip and Windows Flip 3D?
  http://www.gocomputertraining.com/Windows-Flip.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can I navigate another feature of a local html and remote html url and transmit data or the key, value pair?

  Hello

  I'm trying to integrate a local html file and a remote url base html file MAF 2.0.1 based app. I want to access another device (based amx) on click of a button on the html pages. How can I achieve the same?

  Already tried with the below which fails with call javascript directly on the page html itself.

  -HTML-

  <! DOCTYPE html >

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = windows-1252 "/ >"

  Home < title > < /title >

  < script type = "text/javascript" >

  document.addEventListener ("deviceready", callfeature, false);

  function callfeature() {}

  Alert ("callfeature called to map");

  adf.mf.api.gotoFeature ("sni.gps.demo.locationFeature", function (req, res) {})

  Alert ("full gotoFeature");

  },

  function (req, res) {}

  Alert ("gotoFeature failed with" + adf.mf.util.stringify (res));

  });

  Alert ("callfeature called to map closed");

  }

  < /script >

  < / head >

  < body >

  Simple mobile Web Page < h1 > < / h1 > < form method = "get" >

  < input id = "ip1" name = "name" / >

  <!-a href = "mycustomurlscheme://somedata" id = "myurl" > map < / a->

  < button type = "button" id = 'mybtn' name = "gpsbtn" onclick = "callfeature ()" >

  go to the feature

  < / button >

  < / make >

  < / body >

  < / html >

  Hello

  update to 2.1 MAF gives you , that can be added to HTML files the and remote access to the MAF since JavaScript API. Deepak mentioned "adf.mf.api.gotoFeature" and I can confirm it works HTML distance (and so it should be using local HTML). For the transmission of data, not sure whether the request URL object it. I would try here EL referencing a managed bean of application-scope defined in the scope of application (?). I tried beans controlled but so far has not tried to access the managed beans to a feature local or remote HTML using EL (although the EL is here)

  Frank

• Local and remote to the same virtual machine replication?

  Is it possible to configure replication for a virtual machine to replicate locally and remotely?

  For example:

  ServerA is my server I need to replicate.

  I set up replication for this VM ServerA to storage replicated in the same site (local)

  I opened the replication again for ServerA VM and I can only see/manage this replication.

  I would like to reproduce ServerA VM offisite in a remote cluster of VCenter for DR purposes.

  
  

  Is this possible? What I am doing wrong?

  same source VM cannot be replicated on the two sites with vSphere replication targets.

  If you use replication level storage table between the source to the target and the second replication, you use the replication of vSphere, it would be a different story.

• How Exchange View screen between local files and remote server?

  I just need to know how to switch the display between local files and remote server, I want my files the on the left and the remote server on the right.  I had it set up before, but just got a new computer and can not remember how I did it.

  Its OK, I found it. Thank you