focus camera iPhone problem SE

Since the update to the latest version of the software, the camera on my iPhone WILL focus not about 40% of photos.

Tapping no screen no help...

Ideas please?

Hello

Follow the steps here, including contact with Apple Support if necessary:

Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

Tags: iPhone

Similar Questions

  • My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

    My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

    N °

    but maybe you tap the camera icon (bottom-right) when you press the icon of the torch (with the other hand maybe?)

  • Hallo *, bei meiner neuen Nikon D 4 S opens CS 6 keine NEF dateien bei other Nikon cameras kein problem mit dem öffnen, was mache ich please?

    Hallo *, bei meiner neuen Nikon D 4 S opens CS 6 keine NEF dateien bei other Nikon cameras kein problem mit dem öffnen, was mache ich please?

    Warum?

  • 128 Gb iPhone problem 7 with Focus/Light PhotoCamera

    Hello world

    I had a 7 128 GB iPhone with iOS 10.0.2

    I have 2 different problems, and I would like to speak with you all.

    All first with camera...

    If I try to update manually on a dark point, and immediately, a glimmer of hope; at this point, all screen becomes dark.

    Second thing...

    I also have an iPhone more than 6 s and iOS 10 is much faster than the iPhone 7.

    Whenever I close an application to return to the home screen; the animation is delay... I don't really understand how it is possible with this material.

    With iPhone 6s more with same IOS (10.0.2) happen... is very fluid.

    Simone

    See the instructions in this link, under the heading "your photos are blurry or fuzzy":

    Please come back and we all know if this was helpful.  Good luck!

  • Camera front 6 s iPhone problem more

    I noticed that if the front of the 6s more is exposed

    to strong light - when I take a selfie - there is a flash of white light on the screen

    Although the picture comes out ok.

    someone at - it had the same problem?

    Thank you

    Haon

    It's embarrassing! I didn't know all I had to do is pulled off before flash cam...

  • camera screen problem locked iPhone 7

    When you take a photo in locked screen mode, you can not

    Press to display the image that you just take... He's black? It's as if the link to the photo album has been limited

    Hi Lslymrs,

    Thank you for using communities Support from Apple. It is a little uncertain, the exact behavior you describe, but it can be normal or expected. When you use the camera of the lock screen application, you will only be able to see your photos just taken and only as long as you stay in the camera app. If you return to the screen lock and then in the camera application, even if you don't release it, you will see more photo already taken. Please let us know if this is what you see.

    Kind regards.

  • screen/blacklight iPhone problem 6

    Hello

    I have an iPhone 6, it's a refurb of the Apple Store in Sheffield (Meadowhall) that my previous had a software problem. I had about 9 months.

    I dropped a few months ago and cracked the screen slightly however I used it without a problem since, earlier I was selecting a photo to upload to Facebook on the app and my screen went black, I thought that the app crashed so I did a hard reset (button home + lock) and the phone does not seem to come back. The phone came back and the screen was completely responsive but not on.

    I took outside and noticed that in the light of the Sun, the screen was visible, it's also appears if you shine a torch top. I took it to a phone store to have the screen replaced, they tried 3 screens and none of them solved the problem. Anyone know what this could be?

    Drop the phone must have damaged some other pieces of hardware inside the phone.

    But, if the 'phone shop' was not approved by Apple for service phone, Apple or an Apple authorized Service provider won't do much either.

    In this case, you will have to hope that a 3rd party repair shop can find the problem.

  • Update to iOS 9.2.1 creating storage on the iPhone problems 6

    I upgraded my iPhone 6 iOS 9.2.1 a few days ago. «Since then, a message of "storage" almost full keeps popping up on my screen all the minutes and whatsapp becomes unusable ("your iPhone is running low on storage.» So Whatsapp can continue to work correctly, up to 100 MB of space free by: 1 removing applications longer you use, 2 large delete videos from your camera roll, 3 manage your storage in the middle space > general > use > Storage manage). I did all the three things mentioned above. However, no matter how many applications or videos I remove, storage space remains the same: use - GB 11.6, available - 0 bytes. I can't possibly delete data on my phone without losing the essential information.

    I backed up even my phone to my Macbook Eve, reset to the factory settings and then restored my old version back up on iTunes. The problem seems to have been resolved, and there were 4-5 GB of free space on my phone. The phone worked fine all day yesterday, but today the message 'almost complete storage' keeps popping up again and my applications have become unusable again. When I connect my phone to iTunes, it informs me that an upgrade to iOS 9.2.1 is available and asks me if I want to download the update. However, when I go into the settings and the "Software Update" from my phone, it says "iOS 9.2.1. Your software is up-to-date. I don't want to delete applications or data on my phone, more particularly when I still 4-5 GB of free space. What should I do?

    http://www.Macworld.co.UK/how-to/iPhone/how-to-make-space-on-iPhone-iPad-photos-vid eo-ios9-3524712 /.

  • Windows 7 x 64 iphone problem

    Hello

    I have a problem with the upgrade of my portable device in order to access my iphone iphone "camera roll".
    I use the latest version of the iTunes software, but I do not see my iphone as a portable device in the workstation.
    My description of the system:
    Toshiba Satellite P200 - 14H
    Intel core 2 duo T7300 processor - 2 GHz
    4GB - ram
    Windows 7 ultimate x 64 sp 1
    Photo of the question:
    http://img812.imageshack.us/img812/3805/ep0w.jpg
    Thank you

    You will get best results onsulting forums iPhone on the Apple web site.  Apple should provide the drivers.

  • IPhone problem

    Hi all

    Note: Hope I get appropriate reason and solution on your side against my phone or replacement of the device of m.

    Problems/questions :

    • Bbattery heating
    • Mobile suspension question
    • Suddenly phone operation at idle
    • Display problem
    • Does not properly
    • sound quality during the call and song speakers
    • Headset voice (songs in listen)
    • Heating
    • Hanging for mobile device
    • Charging problem

    My device coordinates: -.

    Product - iPhone 5 s

    Model - 5s IPHONE 16 GB GREY

    IMEI no - 352084072673492

    Serial number: DX5QW3LCFRC4

    Take a bar make genius with Apple for an assessment.

    FSAA (Apple authorized Service Provider) or your country.

  • Display recent emails on iphone problem

    I have access to my account hotmail via the Mail app on my iPhone 5s.

    My e-mails are updated manually and when I updated the mail app today, I can only show emails from June-July 2010.

    I've never had this problem before, and I checked that the software is up to date.

    I tried to change the number of emails that I can see, but this allows that show me emails from 2010.

    I also tried to update the application several times and I turned off my phone for a bit then just before updating the application again, but it didn't. whatever it is hanged.

    Any suggestions on how to fix this?

    Thank you.

    Blue141 wrote:

    I have access to my account hotmail via the Mail app on my iPhone 5s.

    My e-mails are updated manually and when I updated the mail app today, I can only show emails from June-July 2010.

    I've never had this problem before, and I checked that the software is up to date.

    I tried to change the number of emails that I can see, but this allows that show me emails from 2010.

    I also tried to update the application several times and I turned off my phone for a bit then just before updating the application again, but it didn't. whatever it is hanged.

    Any suggestions on how to fix this?

    Thank you.

    Close out of the messaging application, tap twice on the "home" button and close completely out of it.

    Then do a reset, none taken from data loss on the home/sleep set button until you see the logo apple and then exit, then wait for the phone to start backup.  Check email.

    If you still experience the issue then remove and reinstall the e-mail account.

    If you still have questions then contact Hotmail.

  • Battery charger, cable, iPhone problem 6

    Hi guys, I'll go directly to the topic: this is my case
    I got the iPhone 6 for about 1 year and a half, my departure from cable elbow off and leaving bend I later he broke the rubber cap and exposed the cable, I have always used this cable for a few months and yesterday I noticed that I can not charge my phone more (the percentage goes to the top but very slow (, as 2% for 30 min)
    I downloaded an app and his told me that my dough have 65% wear...
    I have replace the old cable with the new Anker Powerline + cable. and the problem still exists...
    So: My battery and charger so must replacement? and wrong accessories can cause the battery problem?
    p/s: sorry for my bad English.

    Thank you!

    Your phone is almost two years of use, it is generally acceptable to lithium-ion batteries deteriorate after a number of charges, I would like to replace. It costs $79 for out of warranty: iPhone battery & Power - official Apple Support

  • The 6s IPhone problems

    This just started today, my IPhone 6s seems not to want to connect to my wifi, or something blocking to receive or send data that is messages, open applications that use internet, but I can browse the internet, as there was no problem and I can still call people. Any Suggestions? PS I tried to do a soft reset several times without change.

    Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Please see recommended settings of WiFi routers and Apple access points
    4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
    6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
    10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
  • iPad camera Pro problem

    When you use the camera or FaceTime, my camera makes me look like facing off on the side and does not have everything right! No matter which way reversed, always looking out of one side. Was sent for repairs, but they said was very good. Don't think that they even took selfie to see the problem. If it's like this, I want to go back for 1 K misaligned camera! Is this normal? Mahalos for your help! Aloha!

    You have a plastic or glass screen protector which may be covering part of the camera?

  • Satellite click mini camera rear problem

    Hello! could someone help me please. 10 rear camera no longer works after upgrade and installation of windows. What will I do to solve this problem? Help, please. Thank you

    Click on the Mini - fix driver camera
    ------------------------------
    This has two cameras:
    -"Front" is a webcam above the screen low resolution. I think that this example uses an OV2722 sensor.
    -"Backwards" is a camera of higher resolution in a corner of the white species. I think that this example uses an AR0543 (Intel Avstreams camera) sensor
    When I got the Mini click (Win 8.1) only the rear camera worked. After the upgrade Win10 worked only the front webcam
    -previous discussion forum below gave me enough information to solve the problem.

    1. in the Device Manager there are three relevant entries:
    -under the heading of imaging devices, there is a single entry for "Signal imagery 2400 processor"
    -under system devices there were two entries: ar0543 OV2722 sensor camera and camera sensor Unicam
    2. the driver for camera sensor Unicam ar0543 is OK (10/07/2015), but you'll have to let him search online for updates from the other two.
    -With camera sensor OV2722 there simply a updated driver from 2014 to 2015/06/15
    -With 'Processor of Signal imagery 2400', it will update the driver (to 07/04/2015), but the entry of imaging devices becomes "Intel Avstreams Camera.
    3 Win10 then you ask to restart because there has been a change in material.
    -After that the camera application has an additional button that lets switch you between the two cameras, and both work very well.

Maybe you are looking for

  • New tab next to Active

    Quick question for you guys a long time ago I did, but now I've done it I forgot how. So, how can I open new tab next to curent an and that I would be able to achieve, who without any add ons?

  • Properties through control reference

    I have a group of digital controls. I would like to control properties of these individual controls (persons with disabilities, Visible, value, NumText.Format, and NumText.Precision) by passing a reference to the cluster on the main vi, to one under

  • Is it necessary to pay for a driver printer (Lexmark) installed.

    Have for Lexmark 5070 printer installation CD, but still can not get the printer going, this, despite the printer appears as the printer default and ready to go in PRINTER & FAXES. The message that is displayed on the printer itself to the page said

  • I want to record and edit

    on my last laptop with XP I had tape recorder version 5.1 which had to record wav files and I could edit, cut etc.This has been useful for me to practice a foreign language, with teachers to recite the text, then copy and cut files into small pieces

  • I get this "application not found" after file uploading a file .zip, changed my anti-virus, but it still does not

    Original title: "application not found" after the file download Windows 7 HP pavilion HPE. After a file download (zip file), I get the above message. I can download and open Rar files very well. running norton antivirus, try turning it off to see if