For Vista SP1 installation manual where?

Similar Questions

• Error 0 x 80070002 Vista SP1 installation.

  I tried to download windows vista sp2, but before it can be installed, a windows vista SP1 must be installed first. windows vista sp1 installation cannot proceed this error OX8007002 beak. pls help me what should I do now because there is no more support for windows vista sp1?

  original title: problems with my Windows Vista

  Hi Czarihm,

  You can try these steps and see if it helps.

  Method 1:

  You can read the following article to run the system update readiness tool and check if you can install Vista SP1.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 2:

  After you run the system update tool, you can try to install the stand-alone package for Windows Vista SP1.

  How to obtain the latest Windows Vista service pack

  For more information, you can also consult the following articles:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Windows Update Error 80070002

  Hope this information is useful.

• system essential updates for vista SP1

  Hello everyone, I recently bought a HP Compaq CQ60-305AU with Vista Home Premium SP1 and according to HP system, ESUpdate for vista SP1 pre installed version 1.0.0 . Since then, I've installed all the updates including SP2 Windows. My question is with the software & driver HP web page

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093&LC=en&DLC=en&cc=nz&lang=en&product=3938340 there are a number of (System essential updates for vista SP1) available, do I have to install these updates or only the last has a current 6.00 version or do I need to install one of them, now that I have installed SP2?  Any help would be appreciated.

  If all your hardware is working properly, I wouldn't worry on this subject. Critical updates for SP1 should be included in SP2. In addition, normally SP2 will not install if you need updates, which must be made beforehand.

• error install Vista sp1 installation file Windows6 0x8007000D. 0-KB936330 - X 86

  Hello

  I use a vista home basic windows which was preinstalled on my computer laptop compaq presario to THE V6608 that I bought in January 2008. Recently, I got my laptop to its factory settings. After that I tried to install the full windows vista sp1 update patch (. Windows6 0-KB936330-X 86-wave0) which was about 434 MB in size. whenever I do, I get the error message "there are internal an error 0x8007000D" as directed by the support page from microsoft on that I installed the microsoft update scan tool that is also a updated and uninstalled my antivirus software and tried again. I still get the same error. Can someone help me with this?

  See...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800b0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Your first post was unclear: I thought you were trying to install SP1 manually (after downloading the Setup program), not via Windows Update.

  When you reinstalled Windows, the free trial of Norton would have also been reinstalled (but not valid, of course). Do you have (1) uninstall the Norton free trial once again and then (2) download/run the Norton Removal Tool before you (3) reinstalled NOD32? [Yes/No]

  Remember: you can always open a free support incident. See my previous response.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista SP1 installs, not anything else

  None of the suggestions work threads. I reinstalled same full operating system from the original cd. I had already replaced the hard drive as the old man a bad wwnt. Just curious, if maybe the old hd had a license or something attaching it to the product key and maybe that's what's causing problems?  It seems to me like a lot of people have had this problem where the service pack says it installed, but is not displayed, and continues to appear in Windows update. What a shame. Doubtful that we'll never know what caused this to happen and why there is no patch from Microsoft to simply fix.

  Hello

  You can change the hard disk; It's activation with a new motherboard that you have problems with if you change this.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Error vista sp1 installation

  I get install error 80073712 when I try to install sp1 for Vista Home premium 32-bit. So I ran update readiness tool and wga Diagnostics and here are the results:

  WGA tool:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 4GV68 - 6D8JB-G6MF9
  The Windows Product Key hash: au + OBZ1y48sKA/bWkfKXiuCrOjY =
  Windows product ID: 89578-OEM-7332157-00203
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.003
  ID: {4FB3E0F1-66A1-48E4-BA62-F64ACFC3A9D9} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4FB3E0F1-66A1-48E4-BA62-F64ACFC3A9D9}1.9.0027.06.0.6000.2.00010300.0.0.003x 32*-*-*-*-G6MF989578-OEM-7332157-002032S-1-5-21-335326320-2845939293-1808016938Sony Corporation,VGN-N320EPhoenix Technologies LTD.R0100J420070208000000.000000 + 00037333507018400EE04090409Time(GMT-05:00) Standard is03SonyVAIO100100Microsoft Office Enterprise 20071277BD516F5488F71XypuEuMiKvB TAPsKz2A3qXAOZQ plus 81599-952-9074341-65109 1

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500203-02-1033-6000.0000-2132007
  Installation ID: 264180676326898823910201277360002943874352506971276884
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: G6MF9
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OAAAAAEABAABAAIAAQABAAAAAwABAAEAnJ9KLapYPgGsbOpOSOQSLTSi2uDy9NpHzK/6mKxW9Eg =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  HPET Sony VAIO
  Sony VAIO BOOT
  MCFG Sony VAIO
  SLIC Sony VAIO
  APIC Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO

  and corrupted files listed under the checksur file:

  winsxs\manifests\x86_microsoft-Windows-IE-htmlrendering_31bf3856ad364e35_6.0.6000.20734_none_11ca02253e354324.manifest
  winsxs\manifests\x86_microsoft-Windows-IE-htmlactivexcompat_31bf3856ad364e35_6.0.6001.18157_none_174061970feb9cab.manifest
  winsxs\manifests\x86_df4d840f21b250489843c249fe019e34_31bf3856ad364e35_6.0.6000.16764_none_ff4e0235341a4b0e.manifest
  winsxs\manifests\x86_6c9b25e201b0a4dd70332d28b2ae06a5_31bf3856ad364e35_6.0.6000.20937_none_cf1b865cc455fd51.manifest

  Repost: Chances are there to be a hidden partition restore (not to be confused with the system restore), you would use to do the clean install, Yes. Contact the manufacturer.

  ONLY a clean installation will save this computer. If you need help, please start a new thread in this forum:http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  PS: Give the owner (or its parents) these references:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The Vista SP1 installation problems. 0xc0190036 error code

  When I try to install SP1 for Vista, I have a code for loop (0xc0190035) restart in GADGET. XML file.  I also cannot install security update for Windows Vista - KB938123, which is an update to the gadgets in the sidebar. He get an error code of 8007643. I did all THE procedures in help to include reinstall .NET.  I totally uninstalled all the gadgets of my computer in case there's a wrong code or something else in there.  I have VISTA Home Premium build 6.  It is an OEM copy.  I installed KB947821 checks if SP1 is ready to enter into the computer and all right because it will without asking for updates.  Can someone help me?

  Jim Tinsley,
  Here are some steps to start with.  First to perform a clean boot on your system.  Then, run the following:
  Disk error checking
  System File Checker

  Then Download SP1 and try to install it manually.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Explorer 8 for Vista (KB978207) installation default (80246005)

  The installation of updates 2 & 3 for Explorer 8 for Vista (KB978207) (error code 80246005) failed. The following procedure involving Catroot2 does not solve the problem. What now?

  Using Vista, Vista SP1 or SP2 for Vista?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Any of these applications that run in the background when you installed IE8 (not the update)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista sp1 installation problem

  Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

  Hi esakhani,

  Thanks for posting your question.

  Due to Windows Update, you can try running a Fixit tool from the link below:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
  -Download and install the latest Windows Update Agent:
  http://support.Microsoft.com/kb/946928

  -Run the computer system preparation tool.
  http://support.Microsoft.com/kb/947821

  -Download the stand-alone package for the Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  -Turn the computer in clean boot mode.
  Disabling/uninstalling security software installed on the computer, as appropriate.
  -Launch the installation of the stand-alone package of SP 1 to the clean boot.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Will not update for Vista SP1

  I've had Vista for a few years and had installed SP2. After a pretty bad fall, I had to "restore to the factory settings." This has left the machine as it had been when he came out of the box.

  I checked for Service packs, after he tried to update to IE7 for IE9 to say that I couldn't because I didn't have to update MS. I checked the system and found or SP1 or 2 is installed.
  So I checked updates, where it was SP1 is available. I clicked on "install" and followed the couple to guests where to he started to update. He completed the process and that you follow point that SP1 has been installed, however...
  When I check the system again, there is no sign on SP1 installed on the machine, and when I go to check updates, SP1 is also available, like as if it was never installed. Ive gone round in circles for a few days. Whenever it appears to install, but whenever he of not here and keep appearing as ready to be downloaded
  Help, please!

  Hello

  You did it happen any changes made to the computer before the show?

  Conduct the audit mentioned of the following measures:

  Step 1:

  Check if you have installed Windows Vista SP1 on your computer:

  To do:

  (a) click Start.

  (b) type winver and then press enter.

  Step 2: Perform the steps in the following article and see if it helps:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  

  http://support.Microsoft.com/kb/910339

  Let us know if this helps

• Argh! For Vista SP1 driver conflicts

  I posted this in response to another thread, but did not get a response, so I thought I would start a new threat about this...

  Like many people, I have not been able to get Vista SP1 will appear on Windows Update.  I know that I can just install the stand-alone version, but there has been a lot of problems that are associated, and I just assumed that if he appeared on WU that I could avoid the driver conflicts.  Well, I feel like a fool to have to ask this question, but I can't understand how to install the NVIDIA 140 M update driver from Lenovo that supports SP1.

  I've already updated the fingerprint reader driver, so I guess it's the NVIDIA driver that prevents the display on WU SP1.  However, the instructions to install the driver say extract the files and run setup.exe... duh, no head... but when I download the driver I do not get a zip file, I get 7kd543ww.exe and 7kd543.exe.part on my desktop and when I click the .exe I get an error saying it is not a valid Win32 application. I feel extremely basic request this, but what the hell I am doing wrong?

  T61 running with 32-bit Vista Home Premium

  Thank you! and sorry if the questions about SP1 have been exhausted.

  meh3884 wrote:

  I posted this in response to another thread, but did not get a response, so I thought I would start a new threat

  Please, I beg you! Don't threaten us . Haha, kidding aside. First of all, you have a .exe and a .exepart when you download the file so if for some reason any interruption occurs, your browser can read the partexe and say "hey!" I've done it before"and pick up where it left off. So I think leave download before being realized and tried to open it.

  And this isn't the driver nvidia stop SP1 to appear, this is a weird bug that still continues to be. What you have to do is open Windows Update, go to microsoft and START downloading the standalone version, while its download that SP1 will appear in windows update. Cancel the stand-alone download and start it in winupdate.

  Dan

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• Vista SP1 Installation 936330 question

  Hello

  I bought a HP Desktop used with Vista Business on it. Vista SP1 (KB936330) shows (two) installed and cancelled in 'history of the Windows Update.  The last time I tried to install SP1 a message stating that "this will take a few hours and your PC may restart several times" appears.  As soon as I started the Setup he quit smoking.

  I tried to solve the problem using the method described in the article, "Windows Vista SP1 (KB936330) issue", but it did not work.

  At this point I don't know if Vista SP1 has been installed or not - because he says that both cancelled and installed - as mentioned.

  Another point that may touch, is the PC has only either 7 on it.  I tried to update IE 9, but whenever an error message appears and I can't download it.

  Any help will be greatly appreciated!

  Terry

  Hello
  Thanks for posting your query to the Microsoft community. Sorry for the delay in responding. Before you install the Service Pack, I recommend you follow the steps in the section "before you begin" of this article and check if it

  help.

  You can also follow the suggestion of PA bear MS MVP of this thread and check.

  Hope that the information provided has been helpful and let us know if you need assistance in the future. We're blad for help.

• Windows Vista SP1 installation

  After a crash will recover and put everything back in order, I could not install Windows Vista SP1. Continually says auto update this update is available, but after downloading and a Setup attempt is made, in a few seconds, it says 'Setup is complete. However, it is never appears on the updated list and continues to display on an automatic update.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Direct download;

  SP1 32-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  SP1 64-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=656c9d4a-55EC-4972-a0d7-b1a6fedf51a7&displaylang=en

  clcick start - right click on computer - properties - see what version of bits you have

  ____________________________________________________________________

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Suggestions for Vista SP2 installation?

  I have the window update the value "warn me before to download and install".  So, I have been notified that SP2 is available.  Need suggestions on the best estimate how to install without problems.  Must I download/install from boot.  Should I disable all applications security same Win Defender and Firewall of Win.
  Do I have to turn off my security application for downloading and installation or just download or just installing.  I read that the EULA must be accepted.  When the process is this convocation.  Can u post a sticky with Suggestions for a simple installation of SP2 and the installation process will look like.  Should I wait for more information on installation is available.  Thank you
  Respectfully
  bjm_

  FYI
  I installed SP2, the easy way.  I used the free Microsoft support available for SP2.  Microsoft took control shared my PC and downloaded/saved/ran/installed Stand alone packaging and analysis tool.   They holding me hands and accompanied me every step and I got SP2 installation without flaw.

  bjm_