Problem with routing/circuits between SG300-10 and Dell Powerconnect 5224

Similar Questions

• I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.

• Problem with IPSEC tunnel between Cisco PIX and Cisco ASA

  Hi all!

  Have a strange problem with one of our tunnel ipsec for one of our customers, we can open the tunnel of the customers of the site, but not from our site, don't understand what's wrong, if it would be a configuration problem should can we not all up the tunnel.

  On our side as initiator:

  Jan 14 13:53:26 172.27.1.254% PIX-7-702208: ISAKMP Phase 1 Exchange started (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-7-702210: Exchange of ISAKMP Phase 1 is complete (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% 6-PIX-602202: ISAKMP connected session (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-6-602201: Phase 1 ISAKMP Security Association created (local 1.1.1.1/500 (initiator), 2.2.2.2/500 remotely, authentication = pre-action, encryption = 3DES-CBC, hash = SHA, group = 2, life = 86400 s)

  Jan 14 13:53:26 172.27.1.254% PIX-7-702209: ISAKMP Phase 2 Exchange started (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-7-702201: ISAKMP Phase 1 delete received (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-6-602203: ISAKMP disconnected session (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:56 172.27.1.254% PIX-7-702303: sa_request, CBC (MSG key in English) = 1.1.1.1, dest = 2.2.2.2, src_proxy = 172.27.1.10/255.255.255.255/0/0 (type = 1), dest_proxy = 192.168.100.18/255.255.255.255/0/0 (type = 1), Protocol is ESP transform = lifedur hmac-sha-esp, esp-3des 28800 = s and 4608000 Ko, spi = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 4004

  The site of the customer like an answering machine:

  14 jan 11:58:23 172.27.1.254% PIX-7-702208: ISAKMP Phase 1 Exchange started (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% PIX-7-702210: Exchange of ISAKMP Phase 1 is complete (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% 6-PIX-602202: ISAKMP connected session (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% PIX-6-602201: Phase 1 ISAKMP Security Association created (local 1.1.1.1/500 (answering machine), distance 2.2.2.2/500, authentication = pre-action, encryption = 3DES-CBC, hash = MD5, group = 1, life = 86400 s)

  14 jan 11:58:23 172.27.1.254% PIX-7-702209: ISAKMP Phase 2 Exchange started (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% PIX-6-602301: its created, (his) sa_dest = 2.2.2.2, sa_prot = 50, sa_spi = 0x9de820bd (2649235645) sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 116

  14 jan 11:58:23 172.27.1.254% PIX-7-702211: Exchange of ISAKMP Phase 2 is complete (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  Jan 14 12:28:54 172.27.1.254% PIX-6-602302: SA deletion, (his) sa_dest = 2.2.2.2, sa_prot = 50, sa_spi = 0x9de820bd (2649235645), sa_trans = esp-3desesp-sha-hmac, sa_conn_id = 116

  Kind regards

  Johan

  From my experience when a tunnel is launched on one side, but it is not on the other hand, that the problem is with an inconsistency of the isakmp and ipsec policies, mainly as ipsec policies change sets and corresponding address with ASA platform when a tunnel is not a statically defined encryption card he sometimes use the dynamic tag to allocate this vpn connection. To check if this is the case go ahead and make a "crypto ipsec to show his" when the tunnel is active on both sides, see on the SAA if the corresponding tunnel is the static encryption card set or if it presents the dynamic encryption card.

  I advise you to go to the settings on both sides and ensure that they are both in the opposite direction.

• Problems with dynamic links between Premiere Pro and After Effects

  Hello

  dynamic binding (insertion of After Effects compositions on a Premiere Pro schedule) rarely worked properly since it was introduced. Problems vary (for example "media disconnected" made plates, old versions of comps rendered).

  What's worse, is that you can never tell what will be ultimately made out of Premiere Pro. Thus, a typical professional workflow to several projects together to finish during the day and batch overnight rendering can cause a catastrophe.

  Of course, the option is to not use dynamic link. Which makes then less competitive whole adobe.

  This subject has been widely discussed for years has been a dynamic links. I'm not the only one having this problem, and the problem is far from new.

  My only question is:

  Adobe: have you ever fix dynamic links?

  I don't really understand how you focus on software development in your company. The vast majority of the features of CC is little or not useful. The most important thing in a professional environment is consistent and reliable - performance can you please focus on that?

  I'm inspired to write this post because I just arrived in my edit at 07:00 only to find that my night makes is the wrong versions. All bed very well in the body and AE, damage the final rendering off Media Encoder used an older version of one of my compositions, and that I have nothing to send to my client.

  Janne

  Title edited by Kevin Monahan.

  Management of files Adobe seems to rely on the names and the last path of known files. Body loses links Dynamics (and other files) with frightening regularity in a situation where nothing has changed in the hierarchy of files, the files.

  16, when a hard disk of 8 GB was a huge drive, Pro Tools has been littering files on several disks because, as was the creation of audio files in real time, she had to. Digidesign introduced into a system which incorporated a unique program generated number in each file. Since that day I have never had a problem with lost files or correlate. I can move them anywhere, on any system and any PT session concludes that they are with total reliability - and we are talking about a lot of projects with thousands of files, through several studios. If you are looking for files, you can choose to use the identification number, the name of the file, the length of the file, or any combination of these. Which allows for the substitution of file.

  Until Adobe address this problem with a solution similar to that of Pro Tools, we'll be constantly beset by problems.

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.

• Problems with the installation of the bridge and the company

  Hello world!
  I have problems with the installation of the bridge and the company. Although I have install both of them successfully, when I try to connect to the gateway through the console I have error message saying there is no company installed. In fact, I get an error as well through the wizard saying "failed to run. Please see details below:
  
  Unable to launch: "C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\LRE19.tmp\bin\java.exe-Dtemp.dir=C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\ - cp C:\siebelent\siebsrvr\bin\setup.jar run - args LANG = ENU VISIBILITY = REPEAT BUSINESS = FALSE MODE = MODEL_FILE=C:\siebelent\siebsrvr\admin\siebel_server_sia.scm LIVE" error code: ""(SBL-STJ-00152)-1 "»
  
  Also, when I try ot run the following in the console: C:\siebelent\gtwysrvr\BIN\srvrmgr.exe - u - p SADMIN SADMIN - g siebelwin2k32-e SIEBELENT, I get this error: fatal error (3015667): the program variable 1% is not defined, existing...
  
  
  Thank you in advance for your help!
  
  MARIANA

  Mariana,

  Please confirm if you try to configure the siebel server in the same machine as the gateway server. If so try to use localhost instead of the hostname of the machine setting up Siebel server.

  I assume you are using windows 2003 as the operating system.

  Thank you

  Wilson

• I would like to help with what I believe, it is a problem of routing VLANS on a SLM2008 and RVS4000

  Please see attached Word documentfor a full description.  Thank you!

  Hi Michael,

  All those who say the VLANS within the first hour is a person much smarter than me.

  I have to admit with great humility, I think it took me nagging questions for some patients (AR) and weeks and weeks until finally I have a bit of understanding of the functioning of VLAN.

  So don't feel concerned, many people there are in the same "boat" as you.

  But VLAN, when you get the feel for them, are so so helpful.

  I like under 'acceptable frame type' tick 'all '.

  

  The value PVID tells me basically what VLAN not signposted port is underway.

  This means that in the image below, 3 ports, 6-8 will be I hope, expecting to received and transmit frames Ethernet labeled with a tag VLAN 2.

  But on the diagram above, I can now make room for the following table.

  without tag vlan tagged vlan

  3-1-2 switch port

  6 2 2 switch port can not be marked and unidentified on the same switch port

  7 2 2 switch port can not be marked and unidentified on the same switch port

  8-1-2 switch port

  In the diagram above, I can see that 1 and 2 switch ports are ifor untagged VLAN 3 so the packages roll inside the switch for VLAN 3 will have their VLAN TAGs removed from the Ethernet frame as the traver packets on the switch to an IP host.

  I also see that the switch port 3 unidentified in the VLAN 1, but you have set the acceptable frame on tagged only type.

  Unless I read this all in fact wrong.

  Note: I have to admit that has the big brother to the SG200 SG300 series switch,

  Don't forget about PC / security cameras (except Cisco, hey I'm system engineer have to give my equipment fitted with a plug) in most of the cases do not send frames labeled Ethernet in the switch, which is why I like the idea of accepting all types of frames. I guess that the default VLAN settings are the acceptable frame types = all

  When we add a vlan to a switch port, as the image below, switch to these ports are added as a vlan tagged, because the port if already reside in one VLAN not tagged...  This means that in the case below, 3 ports, 6-8 will be I hope, expecting to received and transmit frames ethernet labeled with a tag VLAN 2.

  

  You said it, not easy, you need to play and practice with switching and routing

  .  But the general rule that I follow for VLAN's.

  A switch port can be untagged in a single vlan, but at the same time marked on several VLANs.

  With respect to the limitation of the camera, my camera, I have not used my filters. But there is the possibility of limiting access by IP address or network.

  I guess you can find an article on your DLINK camera to filter. Reset the default camera and try to add it again.

  Routing between VLANS will occur at the RVS4000, it routes packets between different VLANs, the SG200 cannot be put in Layer 3 mode like its big brother the 300 series (SRWXXX-K9-NA)...

  

  Best regards, Dave

• Problem with VPN compatibility between 2811 and 2911

  Hello

  I would ask anyone had problems with the implementation of a VPN tunnel between 2811 and 2911?

  The IPSec VPN is established, but for some reason, I cannot ping the side LAN across LAN to the other end of the VPN router?

  All experience would be highly appreciated

  Thank you

  IPSec VPN can be smoothly between routers cisco (and not nesesserely cisco) set up, so there should be no problem in your case.

  If you say that this tunnel is established successfully, then the problem most likely related to routing problems between sites or incorrect configured crypto-acl. Check if the hosts located on both sites have correct routing information on how to get to subnets on the other site.

  Make more accurate assumptions, it would be helpful that you provide config on both sites and describe your topology.

• Font problem with the publication between Animate and HTML?

  Hello!

  I have a problem with the publication of my animated movie in CC to animate. Some computers don't recognize the font on Google Chrome that I chose in my animation. Firefox never recognize.

  I don't know how to fix.

  Some pictures of the problem:

  -This is the image of Google Chrome with melting Source without Pro. It works normally (on some computers).

  

  -This is on Firefox. The police has not been integrated.

  

  What is going on?

  Thank you!!

  Hello

  You can try to use the type of static text in HTML5 Canvas document for WYSIWYG experience and see if that helps?

  PS: The static text in the document of the canvas is converted to outlines when publishing to preserve the WYSIWYG experience. If you have a requirement that you need to preserve the text in the js to output file, then use a dynamic text with Typekit web font for experience of consistency.

  Thank you!

  Mohan

• Problems with dial-peer between routers cisco 3925

  Good afternoon...

  I have a problem when we want to connect telephony between two routers 3925, on both routers and I configured the

  telephone service (phone service), I released my phone and there is an internal communication in each of them (I can do

  between the phones of the same router), each router I have configured a dial-position intercomunicarlos and this is where the problem arises. When I try a telephone line in the router for each B telephone router A composed the Ringout timeout and mark Unknow number is finished, when I make a call, the router that has the phone number of this brand, I run sh call status command and tells me that there is an ongoing call and you use , the problem with the dial-peer, is that it seems that the other router you call never happens.

  I help a lot to get an overview of why this happens.

  Thank you

  Excuse my English is not very good

  In addition what IOS you're running, calls can be prevented by the mechanism of toll-free fraud if it is 15.1 or newer.

  HTH,

  Chris

• Problem with DHCP broadcast between VLAN

  Hello

  I trying to solve the lab that I set up, I have a problem with broadcast between VLANS with my DHCP. I looked around the vmware community to find my answer, but I did not who is right why I post here!

  So here's my situation :

  • ESX with 2 race of VM:
    • An R2 of 2012 Windows running a DHCP server with a configured scope
      • This virtual machine is assigned to the vmnic4 with the port VLAN 100 group
    • A Windows 7, which I use as a customer
      • This virtual machine is assigned to the vmnic4 with the port VLAN 110 group
  • Switch Cisco with a simple configuration:

  interface FastEthernet0/1

  Description LINK FOR ESX

  switchport mode trunk

  switchport nonegotiate

  interface FastEthernet0/24

  Description OF LINK ROUTER

  switchport mode trunk

  • Configuration of the Cisco "router on the stick:

  interface FastEthernet0/0.100

  encapsulation dot1q 100

  10.1.1.254 IP address 255.255.255.0

  interface FastEthernet0/0,110

  encapsulation dot1q 110

  IP 10.1.2.254 255.255.255.0

  IP helper 10.1.1.0

  
  

  The resolution of the problems that I did:

  • Affecting the client static IP and that both virtual machine can ping each other
  • Moving from the client to the same VLAN as DHCP server, and the DHCP server is to give the client an IP address.
  • Sniffing the packet:
    • I can see the client DHCPDiscover
    • I can see the router with the command "debug ip dhcp server packet" package passed on the 10.1.1.0.
    • I am not able to see the packets from the router to DHCP perspective

  That's why I guess miss me something ESX configuration.

  Thanks in advance for reading this post!

  
  

  PS: I've linked a vswitch configuration screenshot
  

  I think that you have configured an incorrect address of IP support, take a look at the following line:

  IP helper 10.1.1.0

  
  

  Your DCHP server is really 10.1.1.0? I think not, since 10.1.1.0 corresponds to the ID of the network 10.1.1.0/24 network.
  

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?