Fordwarding a Port does not work

Similar Questions

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• HP 15-AF006AX: USB 2.0 port does not work

  Hello

  I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

  and I am not finding a driver for this, can you help me for this problem

  Thanks in advance

  Hello:

  The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• HDMI port does not work

  Original title: HDMI port stopped working after the update.

  This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

  I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

  Update your BIOS can help you too.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• A 'Powered USB Port' does not work on Mac Mini

  I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

  This specific USB 3 hub? Not all work with the Mini

  Hub USB 3.0, attached to a Mac Mini does not work

  Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

• M40-265 - 2 of 3 USB ports does not work

  Hi all

  Since yesterday, I have my Toshiba Satellite M40-265.

  My problem is 2/3 ports USB does not work.
  I've tried different USB devices such as memory stick, mouse usb and usb printer plugin.
  Just plug the device into the left USB port, if they will be recognised by windows xp home.

  Any ideas what's wrong with my laptop?

  CU,

  GG

  Hi Gerold,

  It looks like a hardware problem with your USB port. Visually check the ports that do not work and you should see a central plastic ankle against which should be four strips of copper fitting. Make sure that none of the tapes is twisted or damaged, it is quite common for one or several of them have been accidentally bent out of position or ankle Central plastic must be broken.

  Kind regards

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them

• USB port does not work

  The model of my laptop is HP Pavilion 2235dx g4. I use windows7 32-bit. It has 3 usb ports. It contains a usb port, it is just side & two others contain he left aside. In this way the usb port on the right side works fine but two other usb ports on the left side does not work.

  What can I do for this?

  Help me...

  Hello:

  Download and install the AMD Chipset drivers and reboot.

  You want the first file on the Web page.  To install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

  If you need graphics driver, AMD Beta driver should work for you...

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• break in series on the com port does not work

  Hello everyone:

  I have the following problem:

  I am writing a command via the ' 'entry visa' vi on my pc com port. in some cases the com port do not return anything. This means that my "visa read" vi would timeout. the problem is that, later, I need to send more orders but must break the line in order to be able to do. I inserted the "breach of visa" vi but didn't have the reaction I was expecting. the line does not break. I tried to increase the duration of the break, but that does not work either.

  Any ideas?

  By using LabVIEW 2013

  A break will not break the connection, it will just a 1 to the Tx line for a period longer than 11 baud (?) or specified length.

  A hardware check that the breakdown is send: connect a scope or a DMM TX and GND, a 500ms break must be clearly visible even on a "slow" DMM (k resistance 10 and two LED antiparrallel or RS232 minitester practice would do the same job )