Form will not question the existing record

Similar Questions

• Write that VI PNG file will not replace the existing file

  Hi all

  I use VI file PNG write to store the graph in a png file. I am able to save the file with a specific file name, which includes the date, model number, serial number etc.. Once the chart is saved as a png file, if I make changes in the graph (as autoscale, turn captions etc.) and try again to save the file with the same file name, write PNG leader VI does not save the changes I made on the chart. I'm looking at the timestamp on the windows Explorer, but it is not updated. I opened the VI itself (which is write protected) to see if it generates an error if I provided the same file name, but it does not generate an error.

  I don't know if I am missing anything.

  Can you people please help me find a way to replace the existing PNG file?

  I'm using LabVIEW 2013 on Win 7 machine.

  p.s. I use the second method mentioned in this article:

  http://digital.NI.com/public.nsf/allkb/5AE4ADCBB65A6D8F86256FBF007A1AC1

  (Programmatically with the Get Image method).

  Thanks for your help

  OPR

  OPR wrote:
  ... Write VI PNG file does not save the changes I made on the chart. I'm looking at the timestamp on the windows Explorer, but it is not updated.

  You are also looking at the image itself? Explorer Windows cannot update the timestamp in the display immediately, or you might be looking at creation time, which doesn't seem to change when you replace a file.

  I can say that I saw a similar question very recently (he was also PNG, even if it's not really relevant), and here it certainly crushes - http://forums.ni.com/t5/LabVIEW/LAVA-snippet-overwrite-keeps-old-date-time-of-png-file/m-p/3257059#M...

• Can't uninstall the old version and install the latest version. Will not uninstall the existing version.

  I tried to uninstall the old version of Firefox, so I can install a newer version. I go to install/uninstall and that you try to uninstall the old version and it says that I need to reboot the system, but it does not end the uninstall when I restart the system

  Upgrading to a new version of Firefox, you don't need to uninstall the previous version. Update Firefox to the latest version of playback

• CS6 upgrade will not identify the existing Installation of CS5.5

  I have a legal copy of CS5.5 Master Collection for Windows on my PC.  It is installed on an SSD, mapped to the B drive for speed.  Just purchased and downloaded CS6 Production Premium for Windows.  Entered the serial number, but the installer could not find the installation of MC CS5.5 (itself an upgrade to a version full of CS5 MC) so he prompted me to the S/N of a qualifying product.  I entered my CS5.5 MC S/N, and the installer says that it is not a product calling.  What gives, and how do I solve this problem and get the CS6 switch to run? Thank you.

  You are partially right.  I contacted Adobe support and they were able to help me with a special code.  Of course, it's sort of downgrade (but I use no more product non-ProdPro like InDesign) but it is legal and I did qualify for the upgrade price.  Choices in Setup included CS 5.5 MC, so that Setup is misprogrammed so that is not supposed to happen.  So now I moved on, no worries.

• PDF form will not calculate the selected fields as soon as there is a numeric value entered.

  All selected fields and as soon as there is a digital value entered, the total field displays nothing, not even a 0. It worked yesterday so I'm not sure what the question is today. I hesitate to do it again because this form has a ton of fields.

  Things to check:

  -That there is no error message in the JS Console

  -The field calculation order is correct (IE, that there is no 'delay' in the order in which the fields are correct results)

• New facility will not load the existing catalogs

  See http://forums.adobe.com/thread/947181?tstart=60 for background

  Computer store has installed a C new and clean, with Win7 only drive on it to run me LIGHTROOOM on and see if carshes comntinue.
  

  I have installed the disk, Lightroom 3.0 64-bit and updated to 3.6

  Do not let me save it, opted for the 30-day trial that the original version is still on the old C drive (I have not the chance to uninstall)

  When I try to open an existing catalog (I have three of them) LR says he has met an unexpected error and cannot open the catalog. I tried to open it from the backup copy - no luck.

  (I accessed last some catalogs through the 32-bit version according to the tha link above)

  What Miss me?

  Thank you

  Jim
  

  Jim,

  Now that your problems seem to be attributed to a permission problem on your drive/folder containing the catalogs, I suggest you to clean up the "mess" we started last night while doing research:

  • Close LR
  • Rename the newly created presets folder "... \Adobe\Lightroom" to something like "... \Adobe\Lightroom.new."
  • Rename the original folder "... \Adobe\Lightroom.old" to "... \Adobe\Lightroom".
  • LR to start as administrator

  In doing so, restore you your presets folder to what it was before the investigation. If LR is running to your satisfaction, you can delete the folder "... \Adobe\Lightroom.new."

  Beat

• copy / paste does not replace the existing file

  Hello

  Sometimes, I copy a jpeg file and passed in a folder.  This file has the same file name.  but after having stuck to it, I noticed that there are 2 files with the same name.
  How can I get to replace this file?
  Thank you

  Hello

  Sometimes, I copy a jpeg file and passed in a folder.  This file has the same file name.  but after having stuck to it, I noticed that there are 2 files with the same name.

  How can I get to replace this file?

  Thank you

  If you paste a file into a folder that already has a file with the SAME file name, you will be informed and asked to choose one of the following:
  1. do not copy
  2. copy and replace those already on file
  3. copy and keep both.

  Perhaps, you have chosen the 3rd weight?

  modification of...

  It will not replace the existing file, unless both have EXACTLY the same file name.

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• PS5 will not change the date registration

  PS5 will not change the date when I save a document I'm working. I tried save as and save and it keeps the date of the photo, in this case, a scanned image that swept the 09/07/11 @ 15:49. I saved many iterations of the PhotoShop photo and the date remains the same. I tried it with other photos and even once, it retains the original date. If I open in AI5 and save it, he recorded with the current date. Am I missing something here?

  I use the current build 12.0.4 x 64, Win7 Home Premium

  PAM

  Chances are Windows found the folder a folder "photo", and explore does NOT show you the date of the modified file.

  Personally, I hate having "automatically" selected multiple views for me, and I tweaked my copy of Windows so that it always shows me the "General items" view all records, be they full of photos or music or something else.

  You can check this by clicking on the name of the folder in the Navigation of Explorer (left), and then selecting Properties.  On the Customize tab, see what it says in the "optimize this folder for:"selector. ".  If it is different from the general items, change it to general Articles.  This gets you a good "Date Modified" column, indicating the date of the file.

  If you want to make a permanent change to Windows 7 (so all new folders are displayed in the form of General items in the folders, and automatic display selection is disabled), a value can be added to (or changed in) the registry as follows:

  Registry key: [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell\Bags\AllFolders\Shell]

  Name of the Data Type value

  FolderType REG_SZ NotSpecified

  -Christmas

• Preview will not open the hyperlink to the specific DOI PDF format

  Hi all

  I generated a PDF of markdown by Pandoc (with xelatex as the tex engine); the PDF document contains hyperlinks URLS. One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160. In Adobe Acrobat Reader, this link accurately opens in Firefox (my default browser) and is then solved using a DOI Manager that I have in firefox. Overview, however, will not open the link. When you click, you get just that boing sound error.

  I believe this may have to do with the security aspects of preview that are cooked in the program - what kind of overview is able to open external files. There was a discussion on this here, but it is not exactly answered my question: https://apple.stackexchange.com/questions/119299/why-preview-app-refuse-to-open-local-lien-dans-un PDF file.

  If this isn't a connected safety side overview, is it possible to adjust preferences overview way treats the links that start by "doi:"? Other ideas.

  Note: I know there is a better way to include the Doi in Tex docs (with the DOI package) as the starting URL by "doi:" but I like to keep my Markdown as clearly readable as possible and does not markup inside latex. I might add a Pandoc filter for this - but I would rather understand the problem of this end if possible.

  Thank you!

  ... One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160.

  This address SHOULD you present is only the persistent identifier. To make a connection, precede the string with the http://dx.doi.org/ url so that your example is http://dx.doi.org/10.2307/488160

  Basically, the url is a program of resolution. By including a DOI link, there is no need for the Manager/addon Firefox DOI. You can have the text that is displayed differs from the URL. In other words, the manuscript shows doi:10.2307/488160 but the underlying url link is http://dx.doi.org/10.2307/488160

  You can see the particular style guide that you must follow to display format specifications. For example, see details for APA style.

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• My IPAD 4 takes great pictures but will not save the photo

  MY IPAD 4 takes great pictures but will not save the photo

  Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support