Frame Stop AS3 problems
I have a problem connecting a framework to the other. In fact it works, but Framework 2 (or 3 or 4) is corrupted by the contents of frame 1.
Frame 1 contains 3 buttons, and each is tied to the Framework 2, 3 and 4 using a STOP function, respectively. In addition, each buttons have reversal that show the State towards the top in front of everyone when wriggle on. So I generated the following script to my 'top' and a 'Stop' functions on the same layer actions (fla.file included)
My problem is that when I click on the 1 button, it takes me to frame 2, but content of the Framework 1 also appears on frame 2, I have the same problem when I go on frame 3 or 4 framework... Now if I remove the function 'up' in the layer of my action, I have no problem at all...
Can someone help me out here
Thank you very much
A newbie here
then use:
Btn1.addEventListener (MouseEvent.ROLL_OVER, toTop);
btn2.addEventListener (MouseEvent.ROLL_OVER, toTop);
btn3.addEventListener (MouseEvent.ROLL_OVER, toTop);
function toTop(evt:MouseEvent):void {}
addChild (SimpleButton (evt.currentTarget));
}
Stop();
Btn1.addEventListener (MouseEvent.CLICK, mouseClickHandler);
btn2.addEventListener (MouseEvent.CLICK, mouseClickHandler);
btn3.addEventListener (MouseEvent.CLICK, mouseClickHandler);
function mouseClickHandler(event:MouseEvent):void {}
removeChild (btn1);
removeChild (btn2);
removeChild (btn3);
gotoAndStop (event.currentTarget.name);
}
Tags: Adobe Animate
Similar Questions
-
When the user leaves the frame stop .flv
I know that the solution is probably disconcerting, but I had very little experience using video in flash.
I have a flash animation that allows the user to watch a video, but it can jump by pressing a button, moving them to another frame.
The problem is, the video continues to play while the user is on a different image, and the user can hear the sound of the video clip. Is there a way to stop the video when the playback head moves in a different setting?
I looked a the clear method, but that doesn't seem to do what I'm looking for.
Any suggestions would be most appreciated.Moreover, I found the answer where someone said on this thread in the future. The questions was me not look under the right object, rather than the search of properties and methods for the video it is in what we call netStream. You use the method of "pause" to stop... it could be a stop of the method too, have not checked yet, I think it's a moot point in my case at least. Here's the code.
-
Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?
It's a scam. Give them nothing.
Contact your local police. -
NET framework 4 installation of the update even guard on one more, how can I stop this problem
See the article after some troubleshooting for your question:
Windows Update or Microsoft Update repeatedly offers the same update
http://support.Microsoft.com/kb/910339/en-us>
Please let us know if it did or did not help to solve your problem.
UTC/GMT is 15:17 Thursday, May 17, 2012
-
How to challenge Windows 8.1 don't stop no problem / laptop...
How to challenge Windows 8.1 don't stop no problem / laptop...?
Be more specific.
What exactly do you do when it does not turn off?
-
Help! I'm stuck. No, not the child into the well. I took a picture and put a second layer top with a rounded rectangle to make a frame. My problem is that I need to find a way to hide the small box outside the box on the second layer. Thanks to all those who can help you.
Another option is to put the Options bar of the Rectangle rounded to the path tool
Trash bolt for the background layer, hold down the Cmd key and click on the symbol of the new layer to layer below the image to white. Then edit > fill with white.
Return the image layer and draw the image as a path
Click the load as a selection path in the Panel traced
Edit > stroke and stroke with color
Select > Inverse > delete
-
FLVPlayer stop when redirecting from another frame. AS3
Hello
I am new to AS3, but now I have problem to stop plaing FLVPlayback.
In the main time line I first image used for the preloader and second for intro.
Frame 3 is the first screen with videoand my MainMenu with buttons inside the mc.
Now when I click the button it successfully redirect the screen to the next image and load my page, but I still listen to the music video.
I need to stop playing the video when I redirect to images 4, 5... 28 where are the frame pages.
In MainMenu, I use
import flash.events.MouseEvent;
import flash.display.MovieClip;menu Domov
function btnHome(event:MouseEvent):void
{
(root as MovieClip) .gotoAndPlay (4);
}
function btnOnas(event:MouseEvent):void
{
(root as MovieClip) .gotoAndPlay (5);
}
function btnBoard(event:MouseEvent):void
{
(root as MovieClip) .gotoAndPlay (6).
}
btnHome_btn.addEventListener (MouseEvent.CLICK, btnHome);
btnOnas_btn.addEventListener (MouseEvent.CLICK, btnOnas);
btnBoard_btn.addEventListener (MouseEvent.CLICK, btnBoard);Web site have 24 pages that I do not copy the following buttons.
Sorry for my English.
First of all understand the SoundMixer class:
import flash.media.SoundMixer;
To stop the sounds then called stopAll method:
SoundMixer.stopAll();
-
Hi all
Animation can play so I have an animation inside a clip and a still picture 1 the problem is when its done I need to go to a diferent/scene frame
I tried a lot of different codes but nothing seems to work any ideas?
I tried
Stop ('framework', 'scene')
root.gotoAndStop ('framework', 'scene')
parent.gotoAndStop ('framework', 'scene')
Thank you for the attention!
Try;
MovieClip (root) .gotoAndStop ("frame", "stage");
-
I have a (simple?) problem with Actionscript 3.0 in Flash CS4.
I'm eager to a button in a part of the timeline to jump to a button in another part of the timeline and then on again.
Click btn1 10 goto frame then click btn2 goto frame 1 - basic stuff.
This code works fine on its own for the 1 button:
Stop();
Btn1 is part 1-9
Btn1.addEventListener (MouseEvent.CLICK, btn11);
function btn11(event:MouseEvent):void
{
gotoAndStop (10);
}
But if I add the code to the second button I get and error:
TypeError: Error #1009: cannot access a property or method of a null object reference.
to Untitled_fla::MainTimeline/frame1()
Stop();
The two buttons are on the main timeline
Btn1 is part 1-9
Btn1.addEventListener (MouseEvent.CLICK, btn11);
function btn11(event:MouseEvent):void
{
gotoAndStop (10);
}
btn2 is in the frame of 10-20
btn2.addEventListener (MouseEvent.CLICK, btn22);
function btn22(event:MouseEvent):void
{
gotoAndStop (1);
}
Any help would be appreciated.
Kind regards
Richard
btn2 code must be attached to the frame 10 where the button is first.
When you attach it to the frame 1, this button does not exist when this image plays and the compiler produces an error warning you that your code does not work.
-
When I try to close it (using Windows XP Professional) it takes 2 minutes to the menu "shut down and closing of session/restart" to appear, but after selecting "shutdown" it goes back to my office and does nothing except the icon flashes, then I have to do to shut down a second time to get the computer to stop - suggestions?
Hello
Try to log in as administrator or another account to confirm if you are facing a similar problem in other accounts as well.
You can try to clean boot your system - http://support.microsoft.com/kb/310353
I hope this helps.
-
"Unfortunately Video Editor has stopped." - PROBLEM
Hello
My phone is a Verizon's Z3 Xperia.
Recently, I was asked to download the latest version of the Android operating system which I believe is Lollipop 5.1.1.
Since obtain this new version - when I try to edit a mp4 on my phone, when I go to save it, he pointed out several times, unfortunately "Video Editor has stopped." I was able to use video editor before when I had the other version of Android on the phone. for some reason, I also had 2 instances of the video editor on my list of applications in the Application Manager. Now, I have only 1. So after searching a response, I tried a few things such as clear data and cache on the video editing application in the settings on the phone. Someone said to uninstall the application, but it did not uninstall the application available.
What can I do? Editing videos such as mp4s had no problem until I got Lollipop 5.1.1.
Thank you very much for your help!
Chrissy Edmonds
Clear data > Force shutdown > restart the phone > check again
-
Impossible to uninstall anything without this message to come. solution is to download the micorsoft updates that are important and I did, and the message always appears
Read the info above relating to the resolution of this problem.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: Canon MP Navigator EX has stopped working
I use Win 7 64 bit. I spent an hour with Canon. I followed their directions without success. I did everything suggested on the internet without success. I uninstalled and reinstalled. I tried to fix the corrupted user file. The scanner send scans to the computer for work. The person Canon thought it might be a corrupt and says something about a twain file function registry file. Here are the details of the problem:
Description: Has stopped working the problem signature: problem event name: APPCRASH application name: mpnex40.exe Application Version: 4.0.2.0 Application timestamp: 4df9a6aa fault Module name: ole32.dll Version Module fault: 6.1.7601.17514 fault Module Timestamp: 4ce7b96f Code of Exception: c0000005 Exception Offset: 0004afb2 OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033
Thanks for any help.
Hello
1. have you tried to create a new user profile?
2. what happens when you work with Canon MP Navigator EX?
3. do you get an error message? If Yes, what is the full error message?
4. What are the troubleshooting steps you have tried to solve the problem?
5. have you done any software or hardware changes on your computer before this problem?
Try the following steps.
Method 1:
Run the fixit from following link.
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Scan of the SFC
Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
http://support.Microsoft.com/kb/929833
Display the results.Hope the information is useful.
-
So I brought new Dell notebook n5521 core i5 a week ago but it takes too much time to stop and everytime I open the volume icon, laptop is block and sometimes, when I open any song even once, he gets shot but when I'm about to close, it takes too much time down or to restart and when I restart my laptop again music donot get hang and I can listen to music... Please tell me something :(
Hey Joe,
Follow a few troubleshooting methods and check if this is useful:
Method 1: Disconnect non-essential external devices and then restart the computer. Check if the problem persists.
Method 2: You can run the troubleshooter of System Maintenance and check if it makes a difference.
Open the troubleshooting of System Maintenance Utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter
Method 3: Perform a clean boot to see if there is a conflict of third-party software like the clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If the computer stops working by disabling the non-Microsoft services, you can follow the audit to determine which program is causing this problem.
Note: After troubleshooting, be sure to place the computer in normal mode.
Also check the event viewer for event logs.
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
For reference:
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Please follow the steps and let us know if this helped. If the problem persists, answer and we will be happy to help you.
-
Windows 8 stop & Hang problem?
I upgraded my new laptop from windows 7 to windows 8 the day its launch as I was part of the upgrade offer. Since its installation, the beings of system to freeze or it slows down ultra slow. Also when I stopped, it just says: stop but he doesn't even if I wait for half an hour. Please suggest what to do?
Problems with perceived judgment as being the choice of the day. I thought I have mine healed with the fast start of stop mode. It worked once or twice and now using the power button to stop it.
Maybe you are looking for
-
OfficeJetPro 8600 Premium ID missing copy
Is someone can you please tell me if this is supposed to be a feature of this model. I can't find the copy ID anywhere. I followed all the steps that people have posted and this is not the case to find. I'm not able to reinstall the firmaware as HP
-
Update 2.2 - phone starts up
I finally got the 2.2 updat this morning. Now my phone is stuck on the screen of the Motorola "M" logo I tried to turn the power off, but he won't stop. I tried pulling the battery three times now, still does not boot to the top. I tried with and
-
When I try to open any PDF files it displays an error message with a name of file and at the bottom says 'invalid value for registry. How can I fix it? It's never happened before. I have a windows 8 that I bought in October 2014.
-
Tray of the taskbar and the system on Windows 8 is not refreshed.
Hello I'm having a problem that is becoming more and more recurring (daily) on my freshly installed Windows 8 PC. After a few hours of use, the typical symptoms are: -L' clock is no longer at the time.-System tray icons are not in the right place - o
-
I tried to change the region on my profile, but it still gives me the same error. How can I fix it?