Apple TV 3 frequently stops and restarts all streaming Netflix
This happens at least once during a movie. After it restarts automatically, you must work your way to the content you were viewing and resume watching. It happens so often now that it becomes very annoying.
I suggest to do a restore iTunes restore your Apple TV with iTunes - Apple Support
Tags: Apple TV
Frequently, my computer stops and restarts all am surfing the net. What can I do?
1. what type of internet connection do you use? What is a wired or wireless?
2. you receive messages or error codes?
2. did you of recent changes on the system?
You can check the following items and check if the problem occurs in safe mode with network.
If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Release our system to operate under linux Red Hat Enterprise Linux Server 5.3 (Tikanga) 2.6.18 - 128.1.1.el5
Our ASM is 22.214.171.124.0 block of POWER 2
Only ASM is clustered. Databases are not.
2 cluster nodes (Clusterware 126.96.36.199.0)
I have two questions:
1. we need to stop and start the cssd (crsctl stop crs, crsctl start crs) on both our 2 nodes of clusters.
In our test group, I stopped first the ASM and dbs all running on 2 nodes
Then I got arrested and restarded the cssd on the first node, and then on the second node. What is the good order or procedure?
I noticed after the cssd (crsctl stop crs) stopped the process "/ bin/sh /etc/init.d/init.cssd fatal" was always present. I waited for 30 seconds, but he was always there. Then I restarted the cssd (crsctl start crs) in any case. Why was the fatal process always there? It happened on both nodes. After you restart the cssd, I killed the "/ bin/sh /etc/init.d/init.cssd fatal" on both nodes. He was evidently reappear.
in the event that we want to restart both nodes of the cluster, should 2 - I start by disabling the crs before restart the cluster of 2 knots (crsctl disable crs), and then turn it back on after that 2 linux servers are back (crsctl enable crs)?
Thank you, man
So, for the closure of this thread, which is the appropriate procedure - for them stopping and restarting the cssd on the two cluster 2 node - among the two below:
1 - do a "crsctl stop Sir' and then 'crsct start crs' on the first node. Then do the same thing on the second node
2. make a "Sir crsctl stop" on both nodes. Then do 'crsct start crs' on both nodes
I want to avoid is the two nodes start to restart because of the cssd.
You can run 'crsctl stop/start' at the same time on both nodes or so as you want (1 or 2), no problem.
If you start the clusterware on a first node and later the second node, just make sure that all services who were on the first node the second node have been properly resettled on the second node.
I'm a newbie with this stuff so bear with me. I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideasHello1. the updates you downloaded?2 a successful installation of updates?Follow these methods and checkMethod 1: If you are still not able to start the desktop computer, you can rename pending.xml and check.
Renaming or removing the pending.xml file booting from the Windows Vista disc.
a. Insert the installation disc.
b. restart your computer.
c.Press any key to load the disc.Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
d. choose your language settings, and then click Next.
e. in the System Recovery Options menu, click command prompt
f. at a command prompt, type the following command below and press ENTER
CD C:\windows\winsxsg. now, type ren pending.xml pending.old , and then press ENTER.
Restart the computer and check.Method 2: Once you are able to boot to the desktop, follow this method.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
Windows Explorer stops and restarts when I right-click on a file or a folder, or when I try to delete a file or folder. A window will appear: "Windows Explorer has stopped working. Windows is checking for a solution to the problem... ». Then another window will appear: "Windows Explorer restarts. This does not happen with all files and folders, but many. I can use a third-party program (sheets) to delete files and folders, but not to explore. I have recently installed Windows Live Mail, Photo Gallery and I replaced Norton Security with McAfee, but I don't know if the problem started after or before those. Says Windows solutions I check for updates but I have automatic updates turned on and I have all the updates.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
Did you use the McAfee removal tool to ensure that it has been uninstalled completely? If this isn't the case, it uses now.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Norton is also known to cause strange problems with explore and Internet Explorer.
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
How to troubleshoot performance issues in Windows Vista
Optimize the performance of Microsoft Windows Vista
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).
How to check and change Vista startup programs
A quick check to see that load method 2 is - using MSCONFIG then put a list of
Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
There are many excellent free tools from Sysinternals
-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
There are many excellent free tools to NirSoft
Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
Many excellent free tools and an excellent newsletter at Karenware
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
How to install a device driver in Vista Device Manager
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.
How to disable automatic driver Installation in Windows Vista - drivers
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
What is the difference between the stop and restart? I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor. I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system. Thank you in advance.
Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.
Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.
A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
Please help me
in my network:
each client problems: ""stop and restart automatic dhcp client.
computer restart all of a sudden and when windows clent dhcp service stop
For additional verification on that, we will ask for information. Your computer is connected to a domain network or home network? Please try the steps on this link: DHCP restarts.
Brand of kindly as answer if this post responds to your request. Feel free to get back to us if you need further assistance.
I searched for so long for a solution, until I decided to post a question here.
Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.
Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.
It's extremely frustrating because I have two options:
Leave my computer running in locked mode (allowing my computer to heat and drain its battery)
Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))
Here is my contact information for the computer and all the...
500 GB WD hard drive
Windows 7 ENTERPRISE
If you need more details let me know, so I can help you.
Hope to hear something soon!
MBTIn order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki
If you have any questions do not hesitate to ask
Please use the restart configuration. This will reboot your computer 3 times then save your work
Original title: war Thunder crashing
I have a Dell Inspiron 7420. Recently, when I play War Thunder, the game just stops and restarts my laptop. There is no warning, all of a sudden shows a black screen and the auto restart my laptop. What happens to the login screen.
Hi Pinaki displayed,
Really sorry for the relply ULTRA end. BTW, it's always the same Amos. I tried reinstalliing the windows 8 and all that kind of stuff and I think it's a hardware problem. I'll be sending my laptop to a PC repair shop soon. Thx for your help! Really of sry for long wait.
Need advice on what is the right way to start, stop, and restart a Java task?
I tried with Executors.newCachedThreadPool () or fixedThreadPool(), however I could not present the task once. My program crashed when I tried again the task again after a shutdownnow command()
Tasks are designed to be run once. If you want to restart features, use a service:
Service I posted in the following thread shows how to proceed:
Use of executors is unnecessary because a Service encapsulates the management of execution threads (although you can set your own liquidator on the service if you really need). Everything you need to do is use the start of the service, cancel, restart, and reset if necessary. If you do not use the cancel method, then you must ensure that your service is properly interrupt the current to cancel it for function, as you expect.
I have a strange problem with my new laptop Satellite L650.
Initial bootstrap is ok, and I can start to work. Then, suddenly, after 5-10 minutes the laptop makes a stop and restarts!
The second start is fine and I can work normally for hours.
Everyone has the same problem?
What should I do?
I have the most current BIOS installed, sw suggested by the Board of Directors of Toshiba report but nothing has changed.
An error message appears before shutdown of the laptop?
Is a certain application in use when this happens?
Since when you noticed this behavior?
I've had this computer for a week and every time that I turn on and sign in about ten minutes later just stops and restarts without any explanation. I tried to disable automatic reboot in the Advanced section in the properties of the system, but it didn't fix it, and I can't find any other explanations of what is happening. Any help would be greatly appreciated.
Just bought thisPC?
Nice system. I have a 810-150se. similar to yours.
I have zero tolerance for new products that fail shortly after purchase.
Return it as soon as possible!
Cannot open the computer game stops and restarts
Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue. I hope they don't send you here :-)
Windows Live and Windows live Album Viewer
Please can someone can explain and or offer the solution >
> Why don't Windows Live Mail and Windows live Album Viewer repeatedly to stop and restart?
Please can someone can explain and or offer the solution >
> Why don't Windows Live Mail and Windows live Album Viewer repeatedly to stop and restart?
Windows Live mail etc belongs to Windows Live Solution Center, not MS Answers forums forums.
Please repost to the Mail section Mail Threads forum
Restart mail Windowas
When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.
Try to compact and repair the database (see www.oehelp.com/WMUtil/). There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two. So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).
Maybe you are looking for
I don't remember my password.My Compaq mini 110 poster system stopped on the screen. Help, please.
Hello I think we got a brilliant update because now I can't see my tpt when I connect it to the laptop via microusb port. I am running win 7 64 bit. seriously, what are these developers think. are they just out these apps willy nilly without trying t
Hi all. I just moved back to the PC for awhile on Mac.First seems to work quite fine except that I get no reading to my TV screen at all.I am running Windows 10 and an Nvidia Geforce GTX 760.I have 2 monitors and 1 tv I tried to connect via the HDMI
Hi allSuppose, I forgot to put a traditional export in the background.And during the middle of the export operation, how can I put the same task in the background.I tried with CTRL + Z [to work], then command bg.but it is to show[[email protected] ~] $ bg