Front Panel values lost on save

Similar Questions

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• Effectively save the front panel settings

  Hello.  Just a quick question: is there a way to effectively interrogate all the settings on the front panel and save them in a file to be loaded later?  I know that this is possible by making the keys for each, but my front panel has a huge 38 parameters that need to be saved.  Using the methods I found online and elsewhere in this forum, save a large number of parameters is possible, but would be very tedious.  I was wondering if there was a more efficient way, as a command to mark all present controls and group them into an easy to manipulate the cluster.

  LV 9 versions

• Using the 'current default values do' as a control on the front panel

  Hello

  I'm building a VI that uses a lot of digital controls. I want to use "do current default values" as a control Boolean on the front panel for the user.

  Is it possible to implement when the program is running? What would be an alternative, if this was not possible?

  Thank you

  Mhaque

  
  

• How can I change the value of a control on front panel?

  On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.

  How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.

  Why do you not use a digital display on the slider, and no code is required:

  

  EDIT: Yes, he said. ***

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• How to save a picture of object front panel with the color depth?

  When I use the Invoke node method to get the image of an object to front panel, then save it as a bmp or png, I seem to lose the color depth. What should I do to register programmatically façade objects with the same number of colors as they appear on the screen?

  I'm using LabView 2011 11.0

  You have an entry in the Invoke node called Image depth.  You wired a 8 for her.  Why?  Doesn't mean that you capture an image at a depth of only 8-bit rather weak image?

• Objects lost or orphaned front panel

  Hello LabVIEW gurus!

  I have a façade which contains one or more objects passing, passing off the coast to the left of the original I can't scroll on their.  Attmpting to scroll through more than three or widths of four screens caused the entire session of LabVIEW to stop to answer if I kill the process through the villain Program Manager Windows XP and start over.  Any way to know what is the way out there and move the missing items (if they are even necessary!) without trying to scroll there?

  Michael

  Hi MJ,.

  What happens when you select everything (Ctrl + A) and then align all objects on their right side by using the menu on the front panel?

  If it is a 'complete' object it will be still on the screen (at least should be). If it's only a label (or similar) it can stay there on the left...

• How to disable together them on the front panel lights

  I have a VI that the front panel is shown below where an indicator of the chain is having a problem. The witness here shows the value "Please save the value of Temp Air [C]".

  Problem

  When the indicator is clicked on in the front panel the text box becomes 'editable' in appearance (only) and I did not want this

  Question

  How to eliminate the behavior stated below in the second picture, when the indicator also displays editable? How can I simply leave the system in a State of photography ?

  -Normal front photo

  

  Photo of Two - front with click on channel indicator

  

  Justin,

  Try to turn off the indicator. Node property or right click Advanced-> checked-> disabled state.

  Steve

• Conflict of flow of data on the front panel

  Hello

  My vi is almost done, but I still have a problem with the front panel. I think that there is data traffic conflicts in my vi.

  When you run my vi, you will see the pop-up window asking you to set a path of file, control devices, selection of data to record and trace. Then, you might want to change the units, turn off all the buttons light and ok to select what data you want to save. Then click on RUN.

  The problem is; supposedly all the buttons are on by default, if you disable certain economies or tracing buttons to choose not to save, and then click RUN, after that all the buttons are again even if you have turned off before the race. They must stay off, if you have selected to save. The condition of main data flow is always the same be before running (only light buttons and ok).

  Do you have ideas of how to solve this problem?

  Thanks in advance

  You have what is called a race condition that usually slips in programs that use local variables.  If you look at your first while loop to read in the current value of the 'steam data hand' control and store in a shift register.  After the structure of the event outputs you write this offset value to register in the control and in the process of replacement of the changes that the user can do.

  A quick and dirty solution would be to manage the main event to change the value for 'Stream' in the structure of your event to update the shift register whenever the user changes the values in the control.

  A better solution would be to get rid of the shift registers and move local variables in the structure of the event.  As long as the option "lock the front until the end of the event" (I'm not sure of the exact wording and I work in the LabVIEW Base at the moment so I can't check) is selected it will ensure that you do not work in a race condition (you know the value cannot change inbetween you value reading, and you update the control).

  

  Even better would be to avoid local variables wherever possible.  This is general advice only and not not something that I can do much more tangible without knowing the details of how you want your application to behave.

  Hope this helps,

  Simon

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• Usability is NOR-SCOPE Soft Front Panel for the PXI-5154?

  I am plans to use the PXI-5154 with his NO-SCOPE Soft Front Panel in a product to test instrumentation. Our past experience, our users need an on-board scope that is easy to use which does not load the CPU. In most cases the scope will be used to check a transitional type of pulses. So, the amplitudes and rise times are essential to ensure compliance with ISO standards. The ability to capture, store and recall traces of reports is important, as well as the ability to perform simple and reproducible follow-up measures. We don't expect our users to have to program the scope; "give me the waveform.

  Does anyone have any comments on the usability of the NOR-SCOPE Soft Front Panel? How to compare with other soft scopes?

  Hello!

  The scope Soft Front Panel is very user friendly and able to load/save waveforms, Load/Save settings and make the scalar measures.  I've attached a screenshot of what the front soft worn looks as well as a link to a help document on the high speed digitizer HELP.  Information on the scope Soft Front Panel lies in this document and can be found under the tab content in the configuration tree (NI - Scope Soft Front Panel help).

  Help of digitizer OR high speed

  http://digital.NI.com/manuals.nsf/WebSearch/2123F564C6DE7B27862574DE006915DE

   

• Preview HTML on front panel

  Hello!

  Is it possible to get a glimpse of a text containing HTML tags on the front panel in HTML?

  I want to see my result of html report before I save it in the file.

  Thank you

  Alexane salvation,

  as far as I know, it is not possible. You can load only the URLS or files.

  Mike