Frozen Keybaord after completing the restoration of the system

Similar Questions

• Unable to start the computer after completing the system scan using Microsoft Security Essentials BSOD error (: 0x0000007B)

  Original title: I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials.removing
  I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials. I have rebooted, tried to finally start work configiration and back still an error for windows startup. Attempted to enter the mode by F8 safe failed I then chose without auto restart in F8 and get the BSOD - he tells me to search for viruses and run chkdsk/f, but I can't access it. I tried to restart and it still does not work. technical information on the BSOD readings * STOP: 0x0000007B (0xF7ae9528, 0xC0000034, 0 x 0, 00000000 000000000. Please help it is essential to address them ASAP edition)
   

   

  Hello

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• Ligtroom 6 best, I will describe my problem once the hour 1. After 4 weeks, I get the message "trial version Ligtroom 6 expired 2. You will be asked to fill out my license number 3. After completing the restart and get the message "error 16" 4. Never

  Ligtroom 6

  Better, I will describe my problem once right

  1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a

  2. you will be asked to fill out my license number

  3. After completing the restart and get the message "error 16".

  4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version

  Now repeat the problem after only 4-5 days!

  Caveat! I'm not a computer specialist are not too complicated solution

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Cancellation of WIP job after completing the work

  Hello everyone,
  
  There is a question of "Annulant the WIP job after completing the work.
  
  Please let me know how to solve this or workarounds.
  Give me the navigation please.
  
  
  Thank you

  Hi Adam;

  Please search your question in metalink as cancelling WIP Job there are 272 available docs. Please check. The best way to check your question in these docs

  Respect of
  HELIOS

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• Unable to connect to wireless internet after formatting the system.

  Original title: Mr

  Hi, please my dell Inspiron gives me a serious problem to connect to any wireless router, I can only use moderm to brose, I can't connect to any wireless network, this happened to me after that I have format the system but all other things work.

  Hello

  Thanks for posting your query on Microsoft Community forum.

  As you mentioned after formatting the system, you cannot connect to a wireless router, I recommend updating the firmware on your router and updates your wireless network adapter drivers, as there might be a chance that the wireless drivers are deleted.

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer. Download and install the Windows 7 compatible drivers and check whether the problem is resolved.

  You can refer to the link provided below to update the drivers from the manufacturer's website.

  DELL drivers.

  If the problem persists, I suggest you try the below mentioned methods and see if it helps you to solve the problem.

  Method 1:

  First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.

  See the article below to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2

  
  

  Method 2:

  This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.

  Follow the steps in the following article to troubleshoot network adapter.

  How can I troubleshoot network adapter?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See also: Wired and wireless network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Can auto start an application after restarting the system?

  Hello world

  I can't find a way to the automatic launching application after restarting the system about BB10. But he supports on OS5, 6 and 7.

  Anyone has any ideas on this subject on BB10?

  Noah

  To come support "app without a head" (https://developer.blackberry.com/native/download/roadmap/) , at some point, will provide a feature like that apparently.

  When we see, and if it will be in the first version of this capacity, must be announced by BlackBerry.

• Problem of recovering files after completing the reduced image of the system

  I wanted a quick and easy way to remove bloatware on my HP Pavilion dv6 laptop and I recently found the option to minimize the system image.  During execution of the task, I was given the option to first back all my files and I thought it was excellent.  After waiting 2 hours for her to create the backup, he created a 67.5 GB file on my backup drive and then proceeds to reduce to a minimum the system image.  While he was complete my phone restarted and went through all the steps of setting up for first use.  When everything was done, I plugged my backup disk and navigated to the folder of recovery of file titled "Backup_2011-10-28 125331.  In the file was a file "Recovery.exe" so I guess that I just had to run the file and everything would be restored.  However, he did create a file on the C: drive in the "System Recovery Files" which basically looks like a simple list of files.  The file that was done was only 12 GB, which makes no sense given that the backup folder initial took 67.5 GB on my backup drive.

  I assumed that this recovery file would simply perform a system recovery, restore all files created by the user where they were originally and basically to restore my system to how it was before reducing the image of the system, except of course for the fact that the image of the system would be less.  I was wrong to assume that or am I not successfully restore my system?  When enter windows and attempt to restore the backup created by some HP program that did it, the file is not even given as a possible source of save.  How can I get my computer to where it was before the restoration?  I had more than 100 GB of music, games and programs out there that are now lost and trying to remember what I lost everything will be very tedious, not to mention how long to actually get all the files.  Can someone help me with this? Thanks in advance!

  OK, what I learned hae is the backup created during the copy just for the recovery of all the files in the format of the image (management of stormwater in case you), the restore.exe was never to return to the original lcations since maybe it's different, so there just pictures of stormwater management to normal files and dumps then converts into a folder to restore you It is up to you to sort through them and put them in the appropriate places, stupid I agree, but that's the way it was designed.

  Back to your problem, I would like to rename this "System Recovery Files" System Recovery Files 2 folder, then try the recovery.exe once again, see if there is no option during recovery, make sure you select all files if given a chance, see if it produces more files than he did the first time.

  If this does not work there is a way to convert all the files management of stormwater to 1 wim file and then mount the wim file in explorer to copy the files you need from the image, it's very complicated process which I've never tried it myself.

  .

• Error-1074360293 (IMAQdx Timeout) after completing the acquisition for some time

  My vision in LabVIEW application makes several acquisitions and successful treatment but then acquiring (grab) suddenly fails with a timeout error (-1074360293, IMAQdx: timeout). The error does not when acquiring only the images.

  After that the error occurred that no acquisition is possible. Although LabVIEW is closed MAX Returns a time-out error. Only restart helps.

  some details of the material:

  3 controllers FireWire (1394-a)

  3 cameras connected to the first two controllers, one third (total of 7 cameras)

  Mode for all cameras: 1280 x 960 Mono 8 fps 7.50

  The bandwidth for a FireWire controller is sufficient. (Three cameras on a single controller are running without any problem).

  Consume the application memory is short before or after that the error occurs. But I can't find where exactly.

  Until the error occurs a few minutes until one and a half hour pass.

  More details will follow.

  Is there a FireWire or specialist in the vision that can help you?

  Greetings,

  SHB

  Change the driver it seems to fix the problem:

  "Compatible (legacy) 1394 OHCI host controller" (in German: "OHCI - 1394-Hostcontroller (alt) konformer")

  With this pilot test has worked for more than 66 hours without raising an error.

  Some Articles about:

  http://www.RME-audio.de/forum/viewtopic.php?id=9827

  http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

• I received the error message: 0x0000ffff after running the system restore

  Original title: 0x0000ffff

  has run the system restore and got this error code. How should I do?

  Hello

  could a. you give the error message as well?
  b. are you try to create a system restore point or restore the computer to a previous state?

  c. Why do you try to restore the computer to a previous state?

  We can try the following methods and check.

  Method 1.
  Disable the security software and then try to run the system restore and verify.

  Method 2.

  Let us run restore the system from the command prompt and check. Follow the steps described in the article below to get there.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows7/start-System-Restore-from-a-command-prompt

  Method 3.

  I also advise to use the boot minimum troubleshooting to find the conflicting program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  You can also consult the methods listed in the section below to learn more.

  No restore points are available when you use Windows Vista, Windows 7 or Windows Server 2008 operating system in a dual-boot with an earlier Windows operating system configuration
  http://support.Microsoft.com/kb/926185

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphone App World - My World - cannot connect after completing the new service provider and phone

  Hello.

  I recently switched from AT & T on the 8110 curve from T-Mobile on the Curve 8900.

  I had paid and downloaded a few apps through app World on my previous phone.

  When I try to log on to my new phone to My World, after entering my information to PayPal, I get this error:

  'Failed to authenticate the user at this time.  Please try again later. »

  This means that I can't get my old apps, but I can not also purchase new apps I want.

  Does anyone have a solution?  Will there be a remnant of my account with AT & T somewhere in the system that needs to be eliminated?

  Thank you.

  I figured out it was expired on record with PayPal credit card.

  As soon as I updated with PayPal, any charge in My World.

• Does not start the web page after completing the configuration

  I have a problem with vCD 5.5.2 running on my lab at home. I made sure that all the prerequisites are met. The cell has been initialized properly without one mistake and I'm still not able to launch web page, no idea why this happens?

  vCD is installed on CentOS 6.x

  I enclose cell.log

  I hope someone can share his thoughts with me.

  Thus, all the cell.log told me is that the service obtained running.

  vCloud-container - debug.log will tell me if there is an error after starting the services.

  If this is a new installation of the OS, the firewall blocks outgoing default HTTPS traffic.  can you try to disable just the firewall for a short time, restart vmware-vcd service, wait for the cell.log to show finished, and then try again?  The firewall is the most common question on the newly installed outside the research forward/reverse DNS is not configured for both HTTPS and ConsoleProxy Treaty.

• Skype freezes after completing the registration form

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
  
  IM starting a new Skype account and every time I get all the filled application the computer stops and says program work has ceased to Skype and freezes whenever I'm done filling the appl.

  Hello

  1. What is the version of Skype you use?

  2. it worked earlier, if yes then what were the recent changes that you made on your computer?

  Check the error logs you find in Event Viewer: Open event viewer http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  I suggest you put the system to boot and see if the problem still occurs. Follow the steps mentioned in the article mentioned below.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  You can also post your questions in the Skype forum by clicking this link: http://forum.skype.com/index.php?showforum=2

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M