FTP access?

Similar Questions

• Remote ftp access

  I can't get a remote ftp access to my NMH405. I access remotely through https://ciscomediahub.com/ and can browse my files this way, but I need to have a remote access via ftp as well. I put a ut ftp access and it works locally on my home network.

  What is my ftp address?

  Can anyone help me please with this problem?

  Hi Erikkoken,

  You will also need to know the external IP address of your location.  You can find it at http://www.whatismyip.com/.  My internet service provider gives me a dynamic IP address, so it will change every 24 hours.  To resolve this problem, I have install dynamic host for me to http://www.dyndns.com/name.  You will also need to read the instruction manual for router for DDNS, so you can tell it where to point to and update the IP address.

  I hope this helps.

• How can I get my list of sites and FTP access, password etc... (old win 7 on an external drive)

  Hello, this is not considered a regular registered sites export (I have many)... and it's a mistake.

  In short, after computer out, I got the hard drive I have USB (old win 7 pro on an external drive)

  How can I get my list of sites and FTP access, password etc...

  they are encrypted in the registry if I'm not mistaken?

  any idea?

  Thank you.

  (Google translation)

  proceedings found:

  Just do an export of the new common/site .reg file and the modifier with the values of the old and then importing, everything works

  Thank you

• E3000 Media Server and remote FTP access.

  The other day, I bought this router and I dug through the documentation I can find as well as all the posts I can find on the subject.

  I have UPnP active, active FTP and Internet, under FTP enabled.

  I am unable to access another thing that the installation program if I use the admin/password.

  I traced it on my main computer, but I want to access it on my HTC EVO when im.

  What address should I and what else do I need to access?

  To access your drive to the remote location, you must use the FTP software.

  Install the FTP software on your computer and then try to access your drive to the remote location.

• SPA-2100 block inbound ftp access

  Dear community:

  I use a spa-2100 and other devices. I have DI - 624 router and the server software running on a box WinXPProSP2 ftp. When I connect through the router others macines connected to the router, all right. When I connect to my internet connection directly, rather than through the router or the spa-2100, everything as well. in each case, external users can connect to the ftp server.

  When you use just the spa-2100 and the internet connection, incoming ftp acccess is blocked by the 2100 from simply removing the spa-2100 between the Internet and the windows box provides direct access to the ftp server software.

  What parameters in the spa-2100 would block it? should they be defined as?

  Thank you

  Freeman-a

  Freeman,

  You might try port (under the application tab) forwarding port 21 to your ftp server. That should fix it. Other that that, there is not a firewall to try to move.

  Bill

• FTP access problem

  Hello

  I recently tested FTP server (Microsoft) in our local area network and had no problem connecting to the server with created users.

  Now, I am able to connect to the server and logs on, but I can't transfer data or a list of directories on the remote server.

  I guess it has something to do with our (asa5510) firewall our network natted environment. The FTP server is behind a firewall and a different public ip address. Our local network, from where I am trying to connect since is connected to the internet through a router and use NAT.

  I use FTP on ports 20 and 21 in the firewall

  In the log below, I guess that the problem is in this line:

  COMMAND >: PORT 192,168,1,48,12,231

  the local ip address of the client, where I am trying to connect to the ftp server. There's no problem.

  Is the problem caused by me being on a network of natted, and if so, how to solve this?

  hope someone can help me here

  Best regards

  Umit

  According to me, he has more to do with 'inspected ftp' rather than the NAT configuration. What kind of access and service policy lists do you use? Can you activate ftp fixup and try again?

• Upload FTP Access denied: 530. Any advice?

  I am trying to download on GoDaddy, username and password are correct but its not working. Help, please!

  Hello

  Error 530 is an access denied issue. This means that following:

  1 ID or password entered is not correct.

  2. If the user name and password is correct there is some question access or authorization with user name and password.

  First try to use any third-party tool like filezilla to log in if you get the error even the please contact your host for the correct password or to get the corrected permissions.

  Also look at the link below which explains how to connect with third-party FTP in Muse.

  https://helpx.Adobe.com/Muse/using/uploading-site-third-party-hosting.html

  Concerning

  Vivek

• Lost FTP access so

  Help

  Ive lost access to Business Catalyst via my ftp client app

  I can access via a browser but that prevents the downloading of html files.

  Thanks for your help.

  Read the notice on the Blog of BC, these forums or the main support page lol

  http://forums.Adobe.com/docs/doc-2884

  This has been long in the planning and there has been a lot of opinions on this subject.

• Where to enter the password for ftp access?

  I am using GoLive 8.0.1 on Mac.  I don't use it much, so I'm a little rusty.  I have always used to write and manage only a single site and access ftp as a single site.

  Recently, I changed the password to the ftp site, and of course GoLive cannot access this ftp site now.  But I forgot entry points or to change the password in GoLive, so it can access the ftp site.

  Thanks for any input.

  Don Wong

  [email protected]

  > I use GoLive 8.0.1 on Mac. I don't use it much, so I'm a little rusty.

  > I always used it to write and manage as a single site, a single-access

  > ftp site.

  > I recently changed the password on the site ftp and of course GoLive

  > can not access to this ftp site now. But I forgot where to entry or

  > change password in GoLive, so it can access the ftp site.

  If it's something like 7 GoLive you will go on Site, settings, publish

  Server and 'Add' or 'Edit' and existing account. I hope this helps.

  Carol

• Is it possible to set up a site with a read-only ftp access

  I have a production server and a development server and work on a project with the non - DW users. Often, I need to download files from the production server, but never need to download to it (it's someone other responsibility).
  
  I have two FTP accounts for the production server, one with unlimited access with read-only. I would like to implement a DW site that uses the read-only account to get the files from the server. It would also prevent me from accidentally upload on this server.
  
  Unfortunately, I get permission denied errors when accessing the account read-only. I guess that's because the account does not write permission. I checked that the credentials work by FTPing the site using FileZilla and uploading a file.
  
  The DW FTP requires write to a GET operation on a file?

  Nevermind, answered this myself. It is possible, but the user must configure the site with the correct host directory.

• FTP access with spaces in the names of dir

  Hello

  I'm doing a recursive list of files in an FTP directory.

  Although FileZilla deals with spaces in the names of directory without problem, it seems that Labview struggles a little.

  In effect, if I ask labview for files and a folder named directory, for example/Projects/Camera 1 /, it returns an empty array (while FileZilla sees clearly 12 files in that folder). It seems that the problem is white in the name space, because if I replace (using FileZilla) the space character by '_', LV correctly gives me the list of files.

  No idea how the LabView FTP working properly deal with spaces in the directory and file names?

  Best regards

  perper2001

  Hello

  Unfortunately, I can't share the code, but here's a screenshot of what it looks like.  It is based on the "vi directory listing" which comes with labview.

  

  Basically, it send the command MLSD and wait for an answer. After that, it's a matter of parsing of the response from the server that my FTP looks like this:

  type = CDIR; sizd = 3; change = 20150220090455; UNIX.mode = 0705; UNIX.uid = 32210; UNIX.gid = 100; single is d8g863beb0;.
  
  type = IRDP; sizd = 5; change = 20150302165245; UNIX.mode = 0705; UNIX.uid = 32210; UNIX.gid = 100, unique = d8g863beae;...
  
  type = dir; sizd = 12; Change = 20150302000236; UNIX.mode = 0705; UNIX.uid = 32210; UNIX.gid = 100, unique = d8g863beb2; Battery camera 9

  Kind regards

  Peper

• to access the files and folders via FTP

  Hello
  I have a small question:

  How to set up FTP access to the files of netgear NAS storage?

  I've been using the SMB service and DLNA service for a long time without any problem, now I enabled the FTP service and I am able to connect normally, but I see not all the files listed in there, I checked all the options available but I see no reason for that.

  I have ReadyNAS 102 - fw 6.4.1 and I use windows8.1 with total software order to connect as a client.

  My PC and the NAS are connected to the router via a cable as they are both in LAN: 172.16.1.35 - NAS, 172.16.1.32 - PC

  Maybe I need to put a special permission or I do something wrong?

  Thank you.

  OK, I finally found the reason.

  I need to go to the actions, choose press rack button and set permissions for FTP access.

  After that, it works fine.
  I think that the http interface is very intuitive, it does not give only your clear vision of functions - I had a few problems before with an unclear interface.

• Using configuration FTP server access

  All of our users internally connect to internet through firewalls pix 515e.

  I install an ftp server on the IP 192.168.0.49 and already configured to access the PIX. Users within the office using the 192.168.0.49 ip address to access the ftp site so that users outside of the use of the ftp.mmg field - me .com to access the site.

  The field ftp.mmg - me .com is linked to our public ip address.

  The problem is only users inside can use the above mentioned internal ip address. If they try to connect to the ftp via the ftp.mmg field - me .com, there is still time. So, how I can configure the firewall to allow users inside to use the domain name to connect to the ftp?

  It's the command that I published to configure the firewall for ftp access:

  static (inside, outside) 80.227.104.242 tcp ftp 192.168.0.49 ftp netmask 255.255.255.0 0 0

  Hello

  You have two options here-

  -If you want the command alias so your syntax should be as follows:

  alias (Inside) 192.168.0.49 80.227.104.242 255.255.255.255

  -If you run PIX 6.2 or higher, my suggestion would be to edit your existing static with the keyword "dns", stated as follows: -.

  static (inside, outside) 80.227.104.242 tcp ftp 192.168.0.49 ftp dns netmask 255.255.255.0

  Thank you

  Renault

• Client access FTP and object-group

  Hello

  Someone can help, we want to make a group of objects for some of our employees to have access to the FTP server of office

  All I want is to create a group of key members of staff can download files from any FTP server but denied anything else

  Use us ISA Server for web and ftp access seems never fully work through ISA and so would pass to key personnel

  So far, I tried these parameters but always violated user 192.168.2.30?

  object-group network access FTP

  Host network-object 192.168.2.30

  internal access-list allow tcp any object-group FTP eq ftp access

  Thank you

  Clint

  Thank you... mark the post as solved, which can help others... rate replise if found useful.

  REDA

• My FTP client refuses my password yet web file manager access remains intact. What should I do to get the ftp client to allow me access

  I have access to download files on my site of catalyst for business via a browser.

  My FTP client is non-functional because it has started to reject my password.

  It's the second occurrence of this type.

  ID access by browser only, but as he does not accept the html files I need ftp access as well

  What could happen and how can I solve this problem. ?

  I changed, my password yesterday.  Finally gained access via my ftp client this morning.

  Thank you