Full PSE9 - print edition problem

When I try to print from the full edit page, I click on file, then print and the print page appears. I select the correct printer, press Print and the fax menu appears. I prefer print to full edit instead of starting from the Organizer. I have a CanoScan 9000f installed, but I scan directly to the PSE, I scan to my computer and open the pictures of the PES. This could be the problem or is there another solution? I can't print to full edit with any image, scanned or not.

Please read related post for printing number http://forums.adobe.com/message/3275350. Go through my repies and wire and check if this resolution steps fixes your problem.

Thank you

Garry

Tags: Photoshop

Similar Questions

  • J4580 print cartridge problem: [Tri-Color] refer to the device Documentation

    Well, I'm starting to feel like I knew better, buy another HP printer after dismal luck with two all-in-one before.

    My J4580 already gives me headaches after only 6 or more months of use.

    The unit refuses to print, declaring "print cartridge problem: [Tri-Color] refer to device Documentation to troubleshoot."  Nothing in the help documentation.  The Habs is always 90% full.  Sometimes pulling the Habs and placing back in crazy wil it restarting.  When it restarts, it prints perfectly.

    I tried the ubiquitous "clean the contacts" and other instructions help generic that I saw, but those who were without help.  The "Solution Center (Yes, good)" appears and all ithas is a link to buy more ink (!).

    Someone has an idea?  I'm about to throw it through the window of stores office, given that I can't throw it out the window of HP.

    Thank you!

    Yes * I know * and I'm sorry that I forgot to come back here.  I had a major system crash and I had to reinstall a lot of drivers for my multimedia player, GPS, and printer (!).  As this occurs, the device did not return this error - touch wood.

  • OfficeJet Pro 6835: Print head problem

    Getting the message print head problem. I checked guaranteed, says it is active, but when I click on contact HP support, I get the following: "this product is is more served by HP.» You can search for possible solutions on this Web site.

    It absolutely won't let me access a form to fill for the customer support, nor give me additional info on how to solve this problem. Any suggestions?

    Step 4 don't give me the phone number and the file number. This option is chat or twitter. Waiting for chat now. Do you have an indication that the warranty was until December 29, 2016.

    Edit: Cat ordered a replacement with an order number, so I think we can close this.

  • Add-on for Print Edit does not work

    I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

    Hello

    Did you mean this extension:

    The contact details are on the right side of the page, next to the section 'on this add-on.

  • HP Officejet Pro 6830, model 6: print head problems

    Have an Officejet Pro 6830, model 6835.  Error message received saying this printer had print head problem.  Also the error code oxc19a0020.  Troubleshoot-carried out every day to solve the problem without success.  Reset, change cartridges, activated and deactivated (including source) and nothing has worked.  Bought on 23/04/15.  Only three months old.  Help!

    Hi, I would advise to call HP support immediately about this, as it is likely that you will need a replacement printer.

    Can you please let me know how you go?

    Thank you

    Ciara

  • Printing printer F2480 problem

    Hello

    I am using HP Deskjet F2480 and problem on printing. I used the HP Print and Scan Doctor 4.6 software to diagnose the problem.

    The printing result is as below:

    The words, black gradient and the black lines are having to "shadow".

    I hope someone can guide me how to solve this problem.

    Thank you.

    Hi @noname9,

    Welcome to the HP Forums!

    I see that the words, black gradient and black lines have a 'ghost' with your HP Deskjet F2480 effect. I'm happy to help you!

    I suggest to go through the steps in this guide, HP Deskjet F2400 all-in-One Printer Series - troubleshooting print quality problems.

    I hope it's useful!

  • print head problem Officejet 8500 has

    Hello

    I just replaced all my ink cartridges, and still it tells me that there is a printhead problem; the message says to replace the printhead to resume printing.

    Didn't I do it when I changed the ink cartridges?  Visual instructions on the printer seems to show a slightly different model of what I, and the print head seems to be separate.  It does not have to be the case in my model.  Anyway, the instructions also say press the button 'change print head' in the main menu, I can not even to the main menu but it is stuck on the message "print head problem".

    I'd appreciate some advice on how to proceed!

    Thanks in advance!

    This picture help?

  • Print head problem

    Hello

    I followed the instructions for print head problem for my HP Officejet Pro 6830. However when I tyr to connect a job I get the text next message "this product is is more served by HP." You can search for possible solutions on this Web site. »

    What can I do else?

    @Anniepannie17, try this url.

    http://WWW8.HP.com/au/en/contact-HP/phone-assist.html

  • HP C5180: Printer color problems

    I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

    Hey @TomTwist,

    Welcome to the Forums of HP Support!

    I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

    I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

    Step 1: Calibrate the colors:

    1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

    2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

    3. click on settings

    4. click on print settings.

    5. click on printer Toolbox.

    6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

    Source: The printed colors are not colors should

    If the problem persists, please continue to the next step.

    Step 2: Align the print head:

    1. click on HP Solution Center's on your desktop

    2. click on settings.

    3. click on print settings

    4. click on printer Toolbox.

    5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

    Source: Streaks or lines in the printed Image

    Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

    If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

    HP Technical Support can be reached at the: 1800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Good luck!

  • HP Officejet 4500 print cartridge problem

    After you install the new black ink cartridge, error message came: 'print cartridge problem [Black]. Refer to the documentation for the device to get out of trouble. »

    I removed the cartridge and reinsert. Same message. Unplug the printer, then turn it off. When turned on again, the same message.

    Thank you, Jason, for your support.  Lesson: stick to what worked before, for example, 901 XL ink cartridge, as opposed to 901.

    Sidney

  • Photosmart B109 question - display message print head problem cannot be removed

    Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

    I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

    Is it possible to access the menu, while the print head message always?

    Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

    Hello TonyW1967,

    Welcome to the HP Forums.

    In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

    Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thanks for your time.

    See you soon,.

  • printer cartridge problem, 4780

    HP 4780 Photosmart printer range;  Mac 0SX Mountain Lion operating system

    Error message: cartridge Printrer problem

    I completed all the steps my 4780 contained in customer site HP, with the exception of "Avenue" that have no troubleshooting.  The message of screen printer one message I get is 'printer cartridge problem '.  How can I get the normal menu printer on the screen?  How the problem of the cartridge can be fixed?

    Don213

    Here is a link that can help you with the "cartridge problem.

    http://support.HP.com/us-en/document/c01675471

    Let me know if you have done these steps and the results.

  • Print error - "Print Cartridge problem. Refer to device documentation to troubleshoot. »

    Original title - device

    I changed the cartridges and the printer is now saying PRINT CARTRIDGE PROBLEM. REFER TO DEVICE DOCUMENTATION TO TROUBLESHOOT

    I did not have documentation, tried to solve the problems through my laptop but it cannot detact no problem.

    What should do?

    Seek assistance from the manufacturer of the printer.  They should have a copy of books online on the website of their support.

  • Cannot print indicating print spooler problems

    Original title: print spooler problems

    Salvation of printing problems. Execution of troubleshooting etc. said istnt running print spooler. Does not restart when I go into administrative tools keeps of telling me error 1053. No idea how I could fix this?

    Hello

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    I suggest you follow the steps described in the links to search for a file and check the question below:

    1. What is the brand and model of the computer and the printer?

    2. did you of recent changes made to your computer?

    3. what store did you run?

    Follow the methods and check them out below:

    Method 1:

    Step 1:

    Follow the link below to run the Microsoft Fix It.

    Diagnose and automatically fix problems printing and printer:

    http://support.Microsoft.com/mats/printing_problems/

    Step 2:

    Follow the steps in the link below.

    Printer in Windows problems:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2:

    You need to check if the Printer Spooler service is started from services.msc.

    a. click Start, type services.msc in run and press ENTER.
    b. double-click the print spooler and verify that the status is set as Automatic or Manual.

    c. right-click on print spooler and click restart.

    I hope that the information above helps you.

  • How can I get a full-page printed my e-mail without printing folder with her column.

    I want to get a full-page printed my e-mail without printing the file column.  Is this possible?

    And the e-mail program you are using is...?

Maybe you are looking for