Fully qualified computer name during installation of Sun One Directory Server

Similar Questions

• SUN ONE Web server (6.1) @ install Certificate Err: SSL_ERROR_NO_CERTIFICATE

  Hello
  
  I'm trying to Setup SSL (activate HTTPS) on Sun - a Web server. Here are the steps that I have the following details and the error:
  
  Security @ Create Database > > successful
  Security @ request a certificate > > successful (password 'Key pair file' is the same with respect to the database, which has been setup above). Receive an email with "new certificate request".
  Facility security certificate @ > > failed
  
  Certificate of > > > this server
  Select the module to use with this certificate > > >
  Encryption module: internal
  Pair mot_de_passe_fichier_cles: < same step 1 and step 2)
  Enter certificate name ONLY if the certificate is not for 'This Server' > > >
  Text message (with headers): include text that says - START CERTIFICATE - and - END CERTIFICATE->
  
  italics On clicking the button OK get the following window:
  
  "BOLD"
  System error: model of certificate
  Having received a certificate of vacuum.
  
  The returned system error-12885 number, which is
  SSL_ERROR_NO_CERTIFICATE: cannot find the certificate or
  key needed for authentication.
  "BOLD"
  
  
  NOTE: sudo privileges are given to a USER account to start and stop Web services on Solaris box. ROOT privileges are not owned by the same USER account.
  
  Please advice what could be the problem.
  
  Thank you
  REDA

  Send your newly received email with the signing certificate request to your CA and get a certificate. Then install.

• Error 1325: Document is not a valid short file name during installation of Pinnacle studio 12

  Original title: when I try to install Pinnacle Studio 12, I get "error 1325. Documents is not a valid short file name. »

  I updated to windows 7 using the installation disk option and it has not fixed the problem. I did it after trying several "solutions", with the exception of registry changes, found on the web, including the SFC/scannow. Nothing has worked so far.

  I am pleased that you have installed Pinnacle finally.

  "As for the execution of this command, make sure you run the command prompt in right-clicked on it and selecting Run As Administrator" option, and then type, then press enter

  NET user administrator / active: No.

  Restart or log off.

• By specifying the host name for the database during installation

  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
  
  Published by: user4928701 on July 8, 2011 23:15

  user4928701 wrote:
  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.

  Published by: user4928701 on July 8, 2011 23:15

  lsnrctl stop

  move/rename listener.ora to new/other file name

  lsnrctl start

• computer froze during the installation of win 7

  I installed windows 7 on my computer, it got a ways in the installation but then frozen, I rebooted the computer, but now, the only options it gives me is to restore the computer, or tried to fix the computer, ive tried both, but its hours for some reason any and then says it was unsuccessful and restarts

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Computer froze during the upgrade/installation of windows xp

  I have windows xp home edition on a Dell desktop computer. I had problems with the computer freezing and then lost the connection to the internet 3 days ago. So I decided to reinstall windows xp from cd. However, I have chosen upgrade, rather than new install (because it was the suggested method). Now my computer will not complete the upgrade but is frozen during the installation. It remains to 32 minutes until the end. I can't seem to start, can't control/alt/delete or whatever it is. If I unplug my computer and launch it then again once, it resumes where it left off. How can I break out of this loop and start over with a fresh install? Thank you.

  OK, it would have been better to have all the information on this machine in one place. I guess your question in the other post you made about activation is for the same computer? If this is correct, then the information I gave you in your previous post is not applicable.

  With Dell computers, using Dell reinstallation media, you don't need to enter a product key during installation and the operating system is already activated.

  If you use a different XP installation disc that was not provided by Dell, this is why you are experiencing activation problems. If you do not have a Dell brand installation CD, you will need to use a manufacturer OEM generic system disk and use the product key on the label of CA certificate on your computer. If you use a copy of XP retail, you would use the product key on the CD to copy the retail case. In the case of the generic OEM drive, it must be the same version of XP that came with your computer (Home/Pro/MCE).

  All that being said, your sound of questions as a material. Did you leave all devices attached during the repair facility? If so, this can also cause the problem. Unplug everything except (obviously) your mouse and your keyboard when doing an operating system install. You should ensure that the material is solid before attempting to install again.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Understand that all your data will be lost. If you save before, try to start with Linux Livecd such as Knoppix and copy the files to an external hard drive. Then download a utility from drive to drive mftr site. or use a third-party (Acronis Disk Director, Knoppix gparted) start Disk Manager to delete partitions on your hard drive and format the drive.

  Now, do a clean install of Windows, preferably using a Dell XP installation CD. Install Dell drivers for all your hardware when you're done, restore data from backups. MS - MVP - Elephant Boy computers - don't panic!

• Should I apply the different computer names to my Win7 32-bit and 64-bit installations?

  I have Win7 Pro x 64 (64-bit) retail installed on my first hard drive and Win7 Pro x 86 (32 bit) OEM on my second hard drive (such as insurance, in the case that some of my programs and games do not run in Win7 64 bit).  At the beginning of each installation, Win7 request your screen name and the computer name.

  Given that the two Win7s are installed in the same machine, and I have another hard drive as my Backup Master, should I give my Win7s the different computer names?  I think I have to, because I think I run the risk of my backup of 64 - bit crushing my 32-bit backup and my 32-bit crushing my 64-bit support. whenever I run a backup of a BONE followed by another...

  If you have both installed on separate partitions/hard disks, they are considered separate or computers, facilities so yes, both must have unique names.

• Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

  Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application"How can I do this?

  Original title: when I turn on my computer

  You should consider carefully as pop - up and determine what application has a problem.

  If he has no idea anywhere in the pop - up, first physically disconnect your computer from the Internet (because in the following steps, you will temporarily disable your antivirus software).

  • Click Start and type "msconfig.exe" (without the quotes) in the search box and press ENTER.
  • When the "System Configuration" window opens, select the tab "start".
  • Uncheck the half of the listed items (for your convenience, click on "Startup Item" in the column header to sort the items alphabetically)
  • Click OK and restart (click here to avoid the warning that you are in a diagnostic mode)

    If the pop-up warning does NOT appear, the problem application has been one of the items you unchecked.  If this is the case, reopen the System Configuration and check again half of the elements that had checked you.

    Similarly, if the pop-up warning appears, then the application problem is that remained turned on. In this case, open the Configuration of the system, again check the items that you had disabled, then uncheck half of the remaining items.

  • Restart and continue the process until you have identified the problem application.
  • Once you have identified the problem application, open System Configuration once more, select "Normal startup" on the "Général" tab and restart.
  • Do not forget to reconnect your computer to the Internet
  • Uninstall or reinstall the application issue.

• CS5 install Fail: installation met an error(-1) during installation. If please restart the computer and try again.

  Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).

  Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.

  Have not been able to find a solution for the moment. Any help would be greatly appreciated,

  Thank you!

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• After I restored my computer I went through the Setup program and when I'm in the "whats your computer name' part and when I click Next it freezes

  I got the computer used and he could of had problems, but my father to restore the computer and tried to make it past the "whats your computer name?" when he clicked then the part it froze with the mouse like a glass time for loading. the way I know it froze was that it stayed like that for 5 hours maybe. Please try to help.

  Hi steven holzhauer,.

  Follow the steps in the article.

  Setup stops responding with 34 minutes remaining

  http://support.Microsoft.com/kb/828267

  Windows XP does not meet the Message "Setup starts Windows XP"

  http://support.Microsoft.com/kb/310760

  For reference:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  http://support.Microsoft.com/kb/315323

• Updated to XP SP3, get the error "Windows 8 Installation failed" and shows "Failed during installation install.wim"

  I constantly get this error when you try to install Win 8 on XP (SP3). He gets 47% full, and died with the newspaper showing:

  : Error ApplyWIMCallback CONX application C:\$WINDOWS.~BT\Sources\Windows.NEW\Windows\assembly\NativeImages_v4.0.30319_32\System.Xml\9ba07396ae369d010c5c3927a82ef426\System.Xml.ni.dll. RULE [605] [gle = 0x0000025d]
  Failed error when installing install.wim CONX. Error: 0x8007025D [gle = 0x0000025d]

  I did all the things that have been proposed in other posts:
  -removed the virus checker
  -installed any software encryption
  -no special disc running utilities
  -Windows Update
  -run the command chkdsk
  -clean boot (all the services package disabled).

  Any suggestions as to what I can try?

  Boot from the DVD Windows 8
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• What is my macbook pro is fully qualified hostname - necessary for downloading Calibre on an iPad

  I'm putting in place the gauge on my Macbook Pro, so I can download books to Marvin on an iPad, using DPO. The instructions must "use a URL of the form http://myhostname:8080. Here myhostname must be the full qualified host name or IP address, such as the computer is running. »

  I prefer not to use the IP address, because it would require the reconfiguration of a virtual private network. So, what is my host name "complete"?

  Any help would be much appreciated.

  https://en.Wikipedia.org/wiki/Fully_qualified_domain_name

• WU is blocked during installation of updates - but does not freeze

  Hello

  I recently installed Windows 7 Professional on my new PC. It worked well; After that, I installed mainboard and video drivers and then some games.

  Then I noticed that I was not activated Windows Update during installation, so I started the update manually. Download worked, but the installer is stuck to the update 10/59. I then tried to cancel the update (the "Cancel" button was clickable, then the program do not freeze) but nothing happened. So I rebooted the computer...

  I tried to update again, but WU is now stuck at 8/59. I don't know what to do; There is no error message or anything. The only way to cancel the update is by restarting the PC.

  FYI: I waited like 2 or 3 hours, but WU did not progress.

  Thank you very much for the help!

  derKeeper

  Please go here, download and Save the Fixit on this page. Ignore the advanced system like the Fixit applies to Windows 7
  How to reset the Windows Update components

  Next, configure the boot system to eliminate interference of software 3rd party-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE:  Start-up mode minimum state all the 3rd party firewalls will be disabled. Make sure that the native firewall of Windows 7 is now on by clicking on the start ORB in the field type search programs and files in the firewall .
  Under Control Panel , click on the link to check the status of the firewall .
  Alternatively, simply unplug the system from the internet at the moment.

  Run MicrosoftFixit50202.msi and wait until it has finished running, then Cancel the Clean boot steps and restart the system.
  If you are disconnected from the internet, reconnect the system now.

  When the updates that have not installed are available again, suggests that install you them in groups not exceeding 10. Yes, it will take longer than installing them at the same time, but if a problem is caused by the updates you can identify that one is causing it by uninstalling the one at a time.

  Expert MowGreen Windows IT Pro - consumer safety

• Error 800b0100 code during installation

  Hey, I need help here.

  I had returned an error 800b0100 during installation code, then I tried to install the suggested such analysis tool. But it is NOT always do the trick.

  I use window vista Home premium.

  can anyone help please?

  Assuming that the McAfee free trial version has not expired before that you purchased your subscription, see if this triple McAfee fix addresses the problem: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  After uninstalling McAfee (1) application, (2) run the removal tool, and then (3) by reinstalling the McAfee application, reset the Windows Update components & restarts one last time:

  How to reset the Windows Update components?
  [Notes: KB971058 access via Internet Explore (32-bit) only;] [Run the difficulty in the default and aggressive modes, and then restart your computer.
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft