Function Sound

Similar Questions

• Satellite M60-135: no function Sound Mixer level controls to "CD player".

  Hallo,

  On my Satellite M60-135 (Toshiba original Setup) Windows XP Sound Mixer shows a slider of level setting for the drive but it doesn t work.
  I can drag the level control or may mark the mute control for CD player, but it has no effect.

  I tried to disable digital playback in the device driver for the DVD-RAM device but it doesn't change anything on the level control.

  Is this a general problem of the Satellite M60, is a specific defect of my M60 or can it be fixed by updating all the drivers?

  Thank you for any suspicion.

  Wolfgang Nohl

  Hello, Wolfgang

  Believe me that this is not a problem or any kind of fault. As you know CD players used on desktop computers have audio out port. This level control Configurator will be used just for them. Portable CD or DVD player has this audio separated on the port and that this option cannot be used. The same situation is on my Tecra M1.

  In addition, it is a tool of Microsoft and Toshiba has no influence on it. As you know there is no OS designed only for laptops and this option is that it can not be used.

  Good luck and have lots of fun with your M60. It's a great unit!

• microphone internal non-functional / sound card?

  I have a gateway all-in-one and there were no problems during the past two years, that I have owned this. Now, I tried to us on Skype (I use it everyday for my business) and the microphone is released. I checked the audio settings and it says my sound card is not detected and I don't have a microphone. This computer has a microphone built into it so I never need to use a USB microphone. What happened and how do I get my mic on?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Audio Surround Sound System

  Hi all.

  I develop an audio system cockpit of flight 3D to run speech recognition applications. My problem is this: I want to be able to output sound to each stakeholder in the SRS 7.1 individually. In other words, I need to extrapolate on the code that generates the sound output to the left or right of a computer enclosure. I developed a LV code that will do, but when I try to take it to the level following a 7.1 system, I get nothing from beyond the first two speakers. I have notinced that channels detected by the function "Sound File Info" is only two, even if I put the vi "configure the sound output" to seven. I should also mention that the PC sound card provides the output to the surround sound system via a one / audiovisual receiver. Anyone can do the somelight on how I can get the code to see more than two channels and start sound ouputing to each speaker, one at a time? I would really appreciate the help. I also attached the vi that I worked on. Thank you.

  Hi vehnasa1,

  I looked at your code and I was able to get a third speaker to give the output when using a multichannel wave file. I'll make sure that you use a .wav file that has more than two channels in order to get output for speakers spent the first two.

• Sound On / Off

  The book of the training I only shows how Sound On and Off action script 3.0, and I need 2.0.  I don't remember how to do it.  Can someone help me please?  If this can help, the button is named On_btn, Off button is named Off_btn and the audio file is named SLide45.wav.

  Search the Sound class in the help (F1) of Flash files - but essentially:

  var sound: Sound = new Sound();

  sound.attachSound ('SLide45.wav');

  On_btn.onPress = function() {sound.start (;})

  Off_btn.onPress = function() {sound.stop (;})

• Add step C/C++ DLL to "PlaySound" (winmm.dll)

  I have been searching the forum to try to find my answer and examples, but have not found a solution yet.

  I currently have a DLL that has a call to the Windows "winmm.dll" (Directory Windows\System32) system in a step ActiveX adapter, I can beep. (use c# and VB 6 code in the past)

  I use it mainly to play a sound to indicate that my code has reached a 'Fail' step for debugging.

  I am reorganizing my test systems to make them (there are 2 independent systems) so that I can check them in to TFS (source control) and allow them to be independent, absolute path using only the relative paths for the entire sequence and DLL calls.

  The problem I have is that I use the same process template for both, and I don't want to have an absolute path to the DLL that contains the 'Play Sound' function in the DLL.  The process model is called by TestStand top of the stack.

  I tried to access the "winmm.dll" to play the sound and the "mciexecute" function, but I can't step configured in my sous-suite ProcessModelPostStepFailure of process model.

  When you configure the Action step (as a "C/C++ DLL adpapter to the dll, I keep hitting roadblock that I get errors.)

  How to configure this adapter to match the function calls to the 'mciexecute '.

  Code c# uses system.media.SoundPlayer reference:

  This is called TestStand
  public static void PlaySound (String Path)
  {
  SoundPlayer spWave = new SoundPlayer (Path);
  spWave.Play ();
  }

  and VB 6 code is:

  Private Declare Function mciExecute Lib "winmm.dll" (ByVal FileName As String) As Integer

  '# Function to play a sound. Used to report errors, or whatever.
  Public Function Sound (ByVal FileName As String) As Integer
  ' Arg: filename is the full path to one. To play WAV file.
  "Play sound
  Sound = mciExecute ("Play" & FileName)
  End Function

  Is this possible in an adapter TestStand steps?

  "How mocking the adapter correctly call for the ' mciExecute ' function?

  Mike

  Humphrey is incorrect. You can call this dll directly from TestStand. Most of the function prototypes can be called directly from TestStand. However, you will need to manually specify the prototype since the dll has no type information for which TestStand can automatically get the prototype. Simply specify the prototype as shown in the screenshot1.jpg file (return value is a 32-bit integer, the parameter is a string C const). You can also call directly to the .NET API from .NET adapter as shown in the screenshot2.jpg file

• Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8?

  Original title: Desktop

  Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8 rather than having to go from the first layer redundant 'start-up '.

  In fact, if anyone can tell if there's a free windback to an earlier version of Windows (7) who has not all layers unnecessary and icons, I would be really grateful

  Your best bet is to switch to 8.1, that allows you to boot directly to the desktop, and then use a menu like debut8 to replace the old Start Menu and hide the side of the metro.

  If your computer comes with Win Pro 8, you may be able to demotion, otherwise, you will need to buy 7. Before you buy 7, I would recommend go to the computer manufacturer's website and see if there are any Windows 7 drivers for your computer. You may lose certain functions - sound, network, video full resolution - if there is no driver.

  The first option is easy and allows you to keep the improvements in performance and safety 8.

• How to play its not loading swf

  I have a noise in the library named RolloverSound and a MovieClip on the stage with the name of the instance of btn.  I hear this noise whenever I turn btn and that's all I want to do it.  The problem is, is that it sounds also turned off when the swf file loads and I don't want that.

  import flash.media.Sound;

  import flash.media.SoundChannel;

  var overSound: RolloverSound;

  var overSoundChannel:SoundChannel;

  btn.addEventListener (MouseEvent.ROLL_OVER, noise);

  function sound (e:MouseEvent) {}

  overSound = new RolloverSound();

  overSoundChannel = overSound.play ();

  }

  comment this code and retest.

  If the sound still plays, you are wrong or that the sound is attached to a timeline.

• Problems with the sound function and scrolling on the touchpad on my Satellite A500/026

  Hello

  I just brought a new laptop A500/026 and when I play music from my ipod I get a little static pop sound at regular intervals during the song... this happens on all my music. I accidentally scroll horizontally through my touhpad and my screen minimizes or maximizes. I try to find how I did it, but can never seem to return to its normal state. There is obviously some sort of function here, can someone help me with it? I installed the x 64 bit version of windows 7.

  Thank you

  Eddie

  Hello

  The touchpad settings are placed in Control Panel-> mouse
  You can find the additional tab which would be you can access touchpad properties.

  As I know the touchpad properties contains many different options that allows you to configure the scrolling function, to activate and assign different actions to the touchpad corners, etc.

  Check it!

• Satellite Pro A120 - sound works but function button and volume button are not

  Hello

  Although the sound on my laptop works well, I can no longer on / turn off or adjust the volume by using the function keys or the sound button/wheel (before the laptop).

  I think it can occur after you uninstall a boot program (controls when everything starts during startup).

  Any ideas how I can get it working again?

  Hello

  Why you n t try to adjust the operating system in the early time before you uninstalled the application?
  I think this might be the best way to get this rerun

  Otherwise, try to reinstall the Toshiba 3.23.1704.U for Win XP controls

  Greetings

• play sounds temporary and file of your choice when reading data with VISA functions?

  Hello.

  I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

  now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

  Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

  I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

  altougth I use an another while loop for his apartment because I want to save time CPU.

  Thank you.

  

  I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

  Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

• Why Win7 Sound Recorder have not all functions like WinXP?

  WinXP Sound Recorder is able to function as below:-

  (1) insert and mix files

  2) delete before current position

  3) delete after current position

  Where to get these funtions in Win7?

  Hello vymns,

  You never know why developers make changes from one operating system to another, so I can't tell you why it has changed.
  I suggest that you send your comments to the Windows 7 comments as they read.
  Click here for a link to the reviews of Windows 7.

  Try the suggestion of DTMn and right-click on the sndrec32.exe and select 'run as administrator '.

  Please let us know if that helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to delete sounds from a windows function

  How to change a sound scheme do not play all of the sounds for a paarticular function (i.e., output windows)?

  Tab control panel, sound, sounds

  Select the item in the list of events then [below which] together sounds against zero so that the entrance [click the drop-down list, scroll to the top of the list & select None].

• Sound pause/repeat function and chronology in a button

  Hi, I just created a slide show flash with a background sound.  All my images are clip individual film (for the tween class), and I created a button pause/resume for the background sound.  However, when I have a break the sound, always moving images.  I want to know if it is somehow that can interrupt/resume sound and timeline at the same time (pick up where he stopped) within a single button?

  Here's the code I'm doing for the pause/resume button: I use CS5.5, AS3.

  ================================================================================

  var resumeTime:Number = 0.00;
  var mySound:Sound = new Butterfly_Waltz;
  var channel1:SoundChannel = new SoundChannel();

  pause_btn.addEventListener (MouseEvent.CLICK, pauseSound);
  play_btn.addEventListener (MouseEvent.CLICK, playSound);

  channel 1 = mySound.play ();

  function pauseSound(e:MouseEvent):void
  {
  resumeTime = channel1.position;
  CHANNEL1. Stop();
  pause_btn. Visible = false;
  play_btn. Visible = true;
  }

  function playSound(e:MouseEvent):void
  {
  channel 1 = mySound.play (resumeTime);
  play_btn. Visible = false;
  pause_btn. Visible = true;
  }

  ====================================================================================

  Can I add directly the action at these buttons (pause_btn & paly_btn) code rather changing function?  Can a button has two eventlistener?

  Hope that someone could help me.

  Thank you!

  If you want to sound controls also control playback from the timeline, then just add the control of timeline code to existing functions.  Calendar control is simply using play() and stop() function calls.

  function pauseSound(e:MouseEvent):void
  {

  Stop();
  resumeTime = channel1.position;
  CHANNEL1. Stop();
  pause_btn. Visible = false;
  play_btn. Visible = true;
  }

  function playSound(e:MouseEvent):void
  {

  Play();
  channel 1 = mySound.play (resumeTime);
  play_btn. Visible = false;
  pause_btn. Visible = true;
  }

  If your slide show is inside another movieclip, then you're targeting just the movieclip with the call play() and stop(), as in yourMC.stop ();

• Addition of two functions in a single button (gotoAndStop, sound judgment)

  
  Hi all! First of all, I would like to say that I am a beginner total with respect to as3. Okay, let's look at my problem... I have 2 scenes (first of all is a main menu with the button New Game; second scene is the intro for the game). I'm having difficulties to do two functions within a single button. Why do I need that? The first function is to go to the next scene (in my case, IntroScene). Second is to disable the sounds, so I can not hear them in the next scene.

  Here is the code:

  var bobobg:bobomusic;
  var sndChannel:SoundChannel;
  
  bobobg = new bobomusic;
  sndChannel = bobobg.play ();
  
  MAIN - NEW GAME MENU BUTTONS
  newgame_btn.addEventListener (MouseEvent.CLICK, buttonClick3);
  newgame_btn.addEventListener (MouseEvent.CLICK, buttonClick4);
  function buttonClick3(event:MouseEvent):void {}
  gotoAndPlay (1, "IntroScene");
  }
  function buttonClick4(event:MouseEvent):void {}
  bobobg. Stop();
  }

  
  Error message: "TypeError: Error #1006: stop is not a function."
  to MainMenu_fla::MainTimeline/buttonClick4().
  
  I would appreciate if someone could help me with this. Thank you!

  Ok.  Just do this:

  var bobobg:bobobgmusic = new bobobgmusic();
  var sndChannel:SoundChannel = new SoundChannel();

  sndChannel = bobobg.play ();

  MAIN - NEW GAME MENU BUTTONS
  newgame_btn.addEventListener (MouseEvent.CLICK, buttonClick3);

  function buttonClick3(event:MouseEvent):void
  {
  gotoAndPlay (1, "IntroScene");
  sndChannel.stop ();
  }