G3 255: 255 devices USB G3 not rocognized

Similar Questions

• Qosmio F10 - devices USB is not recognized correctly

  Hello
  I had major problems with the USB ports on my Qosmio F10. Everytime I try to plug in a USB device, the F10 recognizes there is only something there, but always categorizes him as an unknown device. For example, whenever I try to attach a USB mouse, he is instantly recognizes her not, even after already spending in the Device Manager and manually install a driver.

  This has been the case since I bought the laptop 5 months ago, but I can't ignore it any longer.

  I have already tried:

  -uninstall all drivers and USB controller hub and reinstall
  -ensuring that the power save to usb devices was unchecked
  -check "install anyway" in the driver signing options

  When I open the Device Manager my USB key looks like this

  -Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24 CD
  -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 2 Serial
  -Intel (R) 82801DB/DBM USB Universal Host Controller Serial - 4 of 24
  -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 7 Serial
  -USB Root Hub
  -USB Root Hub
  -USB Root Hub
  -USB Root Hub

  Any help on this is much appreciated as its driving me crazy :-)

  Hello

  The entries in Device Manager look ok.
  If the laptop recognizes the USB device, so everything is ok. If the device appears as an unknown device in Device Manager, you need a driver in particular. Sometimes, the external device needs a driver that should be supplied with the device.

  I assume you are using the Toshiba Recovery CD. In this case then phone has pre-installed all the drivers needed and you don t need the 3rd USB controller drivers.

• Device USB-6009, not found problem

  Hi all

  So my VI and USB-6009 worked fine until recently.  I noticed the VI was read or graphing correctly the analog input channel information.  My firmware is up to date, but I noticed a problem.  In Isdaq, he will recognize the USB-6009 case is connected, then when I start my VI and to stop it, I double check Isdaq for my device and it doesn't recognize any device.  I have to unplug the daq and reconnect to Isdaq to recognize the usb-6009 case again.  But whenever I start my VI, it does not collect all the data and makes the unrecognizable device.  Do you know what could be the problem?  Is attached the VI I ran in case you want to watch.  Its working fine so far.

  BTW, I'm under Labview on Mac OS X

  Thanks for the help!

  Hello Solis,

  I recommend you to make changes to the parallel tasks to use the cluster of the error to force the order of execution, given that NEITHER-DAQmx Base is not multi-thread safe (review NOR-DAQmx Readme). Please check if this alleviates the problem.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

  www.NI.com/support

• Device "USB" only is not supported after conversion

  * _Running vSphere + ESXi4 (paid and free) _ *.

  I have a XP system that has operated for some time, with 2 USB Dongles for software installed on VMWare Server authentication.

  Recently I found USB Net ShareStation IOGear solution for sharing USB devices over a local network, so I tried and managed to convert the virtual machine to free ESXi and successfully used the USB devices.  Perfect!

  However, I want to save this virtual machine using Veeam Backup, I need it in my firm paid ESXi so I converted again using the stand-alone converter, but I get the following message if poster every time I try to start it:

  Ons power failure

  vCenter could not find a suitable host to power on the virtual machine for the reasons listed below

  & lt; VM & gt;   & lt; NAME of HOST & gt;  Device 'USB' is not supported.  It is a virtual hardware version general limitation of the virtual machine on the selected host.

  If I change settings and delete or one of the USBs listed as not supported, I get again theerror:

  "USB" device is not supported

  and she does not.

  I only am not familiar with editing ini files so would appreciate pointers that would allow me to remove USB devices manually if this is what it takes so it wil boot.

  Thank you.

  You are welcome

  If you think that my answer was helpful, please give points.

• Peripheral USB do not work correctly on the Satellite M40 313

  I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

  However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
  These two devices do not work with my computer.

  Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
  I fetch the requested file, but it made no difference...

  It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

  In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

  Any suggestion is appreciated.

  Hello

  Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
  1.), updated the Bios
  2.) recover the system with the recovery cd (backup your data first!  ;))
  3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

  If you have no success after completing these steps, and then give a few comments.

  Welcome them

• HP 15-R150SA: usbs does not fit into the usb ports

  There are 2 usb ports on my laptop, but none of them made any keys usb or connectors I have made another evey machine I used, what I need to use some sort of adapter?

  Here is the Manual:

  Manual

  Pages 6 and 7 show all ports. Referring to all the photos and figures tell us what ports your devices usb might not fit into. It of "universal serial bus" and is supposed to be just that... universal.

• My book ITS peripheral WD USB does not have a driver?

  The message of my book...   WD SES device USB is not a driver. I have been using My Book without problem until I now get a message!

  The drivers for the device of HIS undertook the "virtual CD" embedded in the passport under the "Extras" folder player

• The power supply Dell place Pro 11 (7130) may be used without danger to charge other devices USB microphone?

  I am trying to determine if it is safe to use my Dell place Pro 11 (7130) - power to charge other devices via micro USB 5v of power.

  That is, phones, tablets, Bluetooth devices (keyboards/mice/headsets).

  I am trying to determine if it is safe to use and avoid carrying more then once Charger Micro USB.

  Said the label on the place of meetings 11 Pro Dell 24W AC adapter charger

  Reference output Dell: 19.5V OR 5V 2A 1.2.
  HA24NM130 / DPN: KTCCJ
  CN-0KTCCJ-75661
  3CP - 0C 11 - A00
  DP/N 0KTCCJ

  I understand that some devices may not charge, I want to make sure that the voltage is 5V for devices usb and not 19.5V, since there 'or' on the label.

  I tried it on a tablet of 5V and it seemed to load correctly: nothing caught fire. Which is in any case an authoritative answer.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• USB-6341 not on the list of simulation devices

  I want to create a USB-6341 siumulated, but this model is not in the list of available under devices simulated in MAX X series devices. I don't see in the devices of series X available for the simulation are PCIe devices. I have MAX 4.7, 9.1.5 DAQmx and LabVIEW 2010. I did this on other computers running older versions of the software and saw this device on the list, so there must be a software component that I have installed, but I can't understand what it is. Any suggestions?

  Richard

  Material of the series X USB were not released before DAQmx 9.2; you need at least this version in order to use a simulated.

• Error "device ID is not valid" USB-6501?

  Hello

  When I run the script "USB-6501 Control.llb Interactive", I have this error "device ID is not valid"?
  If you know another script that animates the "USB-6501" to check its lines, please help me?

  Best regards

  Right now, I don't have the time to look in the code example, you provided...!

  But why not use DAQmx functions OR DAQ Assistant to write code with whatever functionality you need...?

• any USB device USB not Republic United Nations notes senza

  Without some special USB device USB no Republic - Cosa fare UN notes? Grazie leopoldo Rogante

  Hello

  This is an English language Forum.

  Please go to

  http://answers.Microsoft.com/en-us

  to select your language from this link English 

  Don

  Questo e UN forum in lingua inglese.

  If get di andare

  http://answers.Microsoft.com/en-us

  by rates the lingua da questo link English 

• Devices no longer works, usb does not get detected, CD-ROM & CD/DVD-R do not recognize disc

  Original title: devices suddenly stopped working?

  All my devices (that I used a few weeks very well) stopped working.  Help please... I'm trying to upload pictures from my camera to my computer, but my USB is not detected.  My card is not detected.  And my CD-ROM & CD/DVD-R do not recognize the disc.

  Hello

  1. What is the brand and model of the computer?

  2. you receive an error message?

  3. all devices do not work on your computer?

  4. the Device Manager shows all the yellow icons for unknown devices? You have installed all the drivers?

  5. have you made changes on the computer before this problem?

  Method 1:

  You can run the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  You can read the following article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/?kbid=310575

  Method 3:

  You can read the following article.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  See also:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) How to back up and restore the registry in Windows

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• Aspire V does not recognize the USB/phone device. Why not?

  Why does my laptop recognize my phone more?       He knows some device USB is plugged in, but it does not recognize.

  Download and install the USB Samsung drivers:

  http://www.MoDaCo.com/forums/topic/361286-26122015-latestsamsung-USB-drivers-for-mobile-phones-15550...