G72-250US notebook PC product #WQ666UA with Windows 7 Home Premium 64-bit

I have a HDMI port is not working.  Any suggestions?

You will probably need to uninstall your video drivers (graphics card), reboot, then reinstall them using the HP Recovery Manager link in your programs all the.

Tags: Notebooks

Similar Questions

  • H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

    I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

    As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

    I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

    and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

    There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

    Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

    makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

    But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

    Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

    It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

    but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

    HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

    anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

    It's a PCI express 16 x slot card that is 3.0

    Here are the specifications of deetailed according to the guidelines of your page

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

    the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

    However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

    so it SHOULD work.

    and performance tests indicate that it FACT it's just stupid... bios that asks the question.

    I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

    HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

    ITS VERY frustrating

    and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

    because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

    and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

    He shoudnt be as much hassle there?

    Thank you.

    Hello

    You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

    You can Windows 8 Enterprise 90 days trial.

    If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

    The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  • My laptop came with Windows 7 Home premium 64-bit

    My dell laptop came with Windows 7 Home premium 64-bit, but due to a problem I installed windows 7 ultimate 32 bit, but the dell drivers not support, so installed new Windows 7 Home premium 64-bit Suiloidi the link that I found in this community... but now it's showing the windows copy osf is not authentic... I looked for the key and installed but no use... Please suggest me this problemm...

    Have you used the product key on the COA sticker?

    Try the following:

    Click Start, right click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click on the link 'change product key '.

    Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

    COA certificate of authenticity:

    http://www.Microsoft.com/howtotell/content.aspx?PG=COA

    ??

    What is the certificate of authenticity for Windows?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

    You can also use phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Cisco VPN Client with Windows 7 Home Premium 64-bit

    I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

    Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

    Any suggestion would be appreciated.

    Hello

    You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

    Thank you

    John

  • A backup copy of programs of productivity on a windows 7 Home premium 64-bit PC back to a new windows 7 Professional 64 bit PC?

    My task: I backed up all productivity software to a windows 7 home premium 64 - bit PC (which is currently retired) on an external hard drive. I want to use several of these programs on a new PC running windows 7 Professional 64 bit OS. I think I may have several ways to accomplish this task and seeks your advice on the following techniques.

    1. I could remove the hard drive from the old PC and use it as a second hard drive in the new PC. If I do that I must leave the operating system on the drive?

    2. can I just restore my backup to the new PC?

    3. even though I have the original program CD, license restrictions limit the number of times, some programs can be installed and activated. I have addressed the issues of licensining to several software manufacturers of my software, including shade (by PaperPort, Omnipage, etc.) and am waiting for answers.

    4. I also consider the creation of a system dual boot, but I believe that the windows 7 Home Edition premium OS should be the default OS. This change would probably cancel my warranty with HP.

    5 Please, don't limit your answers to the above ideas. I would appreciate your help or suggestions on the best way (if any) to accomplish my task.  Thank you.

    Programs don't return because there is more than one program that just running the main folder.

    When a program installs it puts the files in the Windows system folders. If these files are not present in the active operating system, they most likely will not work. Much depends on how dependent of the program is on files in system folders.

    If you have the original CD for the programs in question, re - install. Relative to the license, as long as the programs are installed and running on a single computer ONLY, there should be no problem at all...

    When you program discs, there is no point in dual-boot. Don't make life more difficult for yourself...

  • Activation problem with Windows Vista Home Premium 64-bit edition

    Recently, I had a problem with my office that was running Windows Xp Pro.   After having tried to reformat the computer with my installation disc, something was holding me back upwards.  Thus, recently bought a laptop with Windows vista on it I used the disc that comes with it.  Note: I ordered this laptop for Windows 7, vista is no longer running on this laptop.  Everything installed very well on my office with the exception of one problem it won't let me activate windows.  Now, it's my copy of windows vista that I paid for.  It runs on a single computer in my office.  I have validated my software on my desktop and it's been validated.  Now why not activate Windows Vista?

    If Vista is preinstalled on your laptop, it is classified as an OEM license and is not transferable.

    The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
    You cannot transfer it to another computer/laptop

    If a license of Vista at retail, you can transfer it to another computer/laptop.
    But it can only be installed on one computer at a time.

    A single license is a single Installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • HP laptop with Windows Vista Home Premium (32 bit)

    I believe I bought this laptop in 2007 and have recently had problems with updates for windows that doesn't.  I finally restored the computer to the factory settings, all installed updates, and am trying to install SP2 so that I can maybe be updated IE to 9.0.  Without the 9.0, the browser gives me a message that says that I can't go to Microsoft.com as my browser is obsolete.  My question: I don't want to buy a new computer, if not necessary, then, what do I do?  Try to upgrade windows or how long can I stay with Vista?

    Hello

    You need SP2 as a condition of system for IE9.

    Sort service packs, then download IE9.

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    @@@@@@@@@@@@@@@@@@@@@@@@

    https://www.Microsoft.com/en-us/download/Internet-Explorer-9-details.aspx

    It is support from Microsoft for Vista SP2 until 2017.

    See you soon.

  • Hi, I have a sony vaio cs series with windows vista home premium 64-bit.

    any help is appreciated very much!

    There is a problem with my laptop screen
    inside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.
    the line is a reflection of the top part of my screen.
    for example, now I have my mozilla open, then the line down flashes the upper part of a mozilla window.
    I tried print screen to show the line. but the screenshot won't capture it.
    Help, please! It's very distracting... There is a problem with my graphics card?
    my laptop isn't even that old (3 months)
    Thank you very much for reading!

    It is still under warranty.  Talk to Sony, it looks like a graphics problem.  They will have to replace the motherboard if the graphic chipset is integrated.

  • version of directx for emachine with windows 7 Home premium 64-bit

    I have an emachine windows 7 64 bit with processor intel pentium E5800, hard disk of 1 TB, multi-in-1 card reader and is EL1852-52W and intel GMA X 4500 grafics. What version of directx should install for everyday use best game and general?

    Win7 has three versions of Direct X 9, 10 and 11, but there isn't any files when it
    moved first, if you run Web X Direct Setup to update DX.

    Download details: DirectX end-user performance

    The intel GMA X 4500 integrated graphics is, OK to use in video and on a daily basis, but unfortunately
    not suitable for games more basic graph.

    GMA X4500MHD benchmarks

    Note that less than 30 fps frame rates are undesirable and below 20 fps are usually unplayable.
    .

  • Adobe Flash Player 10.3 does not work on my computer - HP with windows Vista Home Premium 32 bit and Internet Explorer 9.0 32-bit

    When I load Adobe Flash Player 10.3 he says he has successfully installed, but if you go in Panel, programs and features, it shows Adobe Flash Player 10 Active x, the date of installation, but the size of the file is empty. Also in the internet Options tag program, manage add-ons, as it does not appear. I removed Adobe Flash player and tried to download again - same results.

    Hello
    • What were the changes made before the show?
    • How long have you been faced with this problem?
    You can check this link:
     
  • I have a HP Pavillion G620012EU laptop with windows 7 Home premium 64-bit

    . I had it for two months and restarted several times and it still restarts fine

    Recently I didn't let the machine till the day the day and the next, I got the error message "no boot device found". If I look in the event viewer, he said "it was an unexpected stop.

    I have service pack with all updates

    It restarts so very well

    If it is only two months, return it for replacement or repair under warranty. Make sure that you back up your files before sending.

  • Qosmio X 500 - 10W: old software with Windows 7 Home Premium

    Hello

    First excuse my bad English, I'm french.

    A month ago, I bought an X 500 - 10W.

    I would like to re - install two old games that turned on my satellite M30-104 with windows Xp.

    I just can not install those on the Qosmio that works with Windows 7 Home Premium 64-bit, even if I use the compatibility mode.

    Is there a way to make these ancient works of software?

    I found the virtual computer (for windows Xp mode), but it only works with Windows 7 Pro or Ultimate.

    Thanks for your replies.

    This with virtual PC is good idea and you should get the right version.
    I mean if you have games that are designed for Windows XP Home edition, then you know that this will not work on the new operating system to Win7.

    Best application virtualization for me without a doubt is VMware Workstation > http://www.vmware.com/

  • Where to download Windows 7 Home Premium 64 - bit SP1 pack, how to reinstall, I have a product key

    I have the product key for Windows 7 Home Premium 64-bit. Where can I download it so I can reinstall on my laptop which has been often blocks? Disrupting my work. If you can please send me the link where I can download as soon as possible. Thank you very much for your help!

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

  • Will be device drivers (printers, USB Hubs, router, wireless, etc.. wired routers) who currently works for Windows 2 K and XP (SP3) on Windows 7 Home Premium 64 bit?

    Old devices connect to computers with Windows 7 home premium 64-bit.

    Hi Eventers,

    Thank you for visiting Microsoft Answers.

    Access the link mentioned to check if your hardware is compatible with Windows7 below:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    You can also download and run the Windows 7 Upgrade Advisor to see if your computer is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

    Visit this link to download the Windows Upgrade Advisor:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista Home Premium 32 bit

    I have a laptop Dell Insperion 1501 with Windows Vista Home Premium 32 bit. I tested the ram and hard drive and they check well. I deleted the C partition, formatted the drive with the dell windows vista disk and reinstalled vista. Then I tried to download the updates of windows, but when I click on any button for example, the Start button, it flashes opening and closing in a fraction of a second. Also, when it starts, he won't on the desktop unless I have a key on the keyboard, any key.  I can't seem to update of the bios at the moment is still as dell reference years ago. No error messages or bios beeps. I was able to install all the drivers on the driver disk but can not get updates. This also happens in safe mode. Any suggestions? Thank you.

    Guess what! It is the keyboard that was causing the problem. I disconnected and used a USB one and it works normally. I guess her grandchildren or the cat must have stuck a key on the Board. When the computer is off, lightly rub your palm on the keys to reset.

Maybe you are looking for