Games Windows vista 32 bit provided with windows vista have stop working? I have explorer 7 and worked until recently?

Similar Questions

• Windows 7 problems with gel applications, programs stop working until you restart

  Windows 7 is a stupid IDEA! . Since then, I have installed windows 7 64-bit on my 64-bit machine. I had problems. Programs to decide that they will not open until I restart. IE and Firefox both freeze when all Web sites are trying to load a video. Also other programs will just stop working and turn off while they don't reopen until I restart again. I installed 7 as an upgrade not a clean install, I'm not sure how to go about backup up files for that. I'm also extremely ready to roll back to Vista, I have not had ANY problems with him. I am also about to throw my laptop through a wall with windows 7 and microsoft. Thank you for another piece of trash! (and headaches). With all that money, you would think they can actually DO SOMETHING RIGHT!. I have now lost $120 on garbage, might as well use windows 7 CD as a Brawler of ice this winter.

  PS everyone has ideas?

  TechBuff48

  Rants are part of the dealing with technology. As long as they are against the technical and personal equipment no technical, I think we've all been there. Ironically, two days after my message praising Win7, I had a spontaneous reboot that seems to be associated with a known issue with the sensitivity of kernel-power. I was able to reproduce twice, so I think I have a work around until the bug is addressed.

  OK, back on topic. If you have a version to the retail/TMC, you should be able to perform a clean installation with the option to format the drive; then, the fun of reloading everything from scratch and to restore from a backup. I'm not promoting a particular site, but this one

  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  or
  http://community.winsupersite.com/blogs/Paul/archive/2009/10/23/clean-install-Windows-7-with-upgrade-media-the-answer.aspx
  or
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html
  or
  http://answers.Yahoo.com/question/index?QID=20091022164612AAAJ4kM

  There are also other tools available to start from a CD or a DVD and then format the drive in NTFS, reinstall it from scratch. But you must have a DVD very convenient for loading eligible upgrade then Win 7.

  Good luck!

  MisterWeather

• The ColdFusion 64-bit windows setup program stops working after recent microsoft update

  ColdFusion 64-bit windows installation stops working after the recent microsoft updates and how I worked around it.

  My question is at the end.

  Deploying coldfusion 9 enterprise 64-bit on a trial version Windows 2003 64 bit what OS with OS data center all updates from MS (at 07/04/2011).

  Measures taken (remember, this is all 64-bit):

  1. the installed the base OS that has been slipstreamed with SP2.

  2 checked w / microsoft and 63 OS updates installed.

  3. launch the exe of the trial CF9.

  4. as soon as the first screen (the one that looks like it's the extraction of files) then finished the second screen (the one that says simply SEE Adobe Coldfusion 9) and the progress bar moves quickly 95% to the right and the installation application closes. No error, no nothing. No log file either.

  5. after a moment of silence disbelief (and a new attempt/reboot, etc.), I started to google. I found nothing. However, I found a post (thanks dspent!) which is useful in what he says how he managed to get a log file of all kinds, first extract the coldfusion_9_WWE_win64.exe file and launch the adobe_cf.exe by hand.  (Snafu Dspent install was different from mine, but his position has been very valuable and started me in the right direction.)

  6. has obtained a copy of the file rarunzipper and extracted from the coldfusion_9_WWE_win64.exe .

  7. in the windows directory created in step 6, I have launched adobe_cf.exe.

  8. the same thing (, the installation application closes. No error, no nothing. Log file No.).

  9. I look at the hs_err_pidxxxx.log file (where the xxxx is a number).

  10. I see inside this file, a disturbing message: 'a fatal error has been detected by the Java Runtime' then ' framework issue ntdll.dll ' , then ' the accident happened outside the Virtual Machine Java to native code ".

  11. OK, now I'm thinking ntdll.dll. Native code! It's like Java tells me that for some reason any, that he can't dance with the operating system.

  12. on a hunch, I decided to test a CF install again on a server with just the installation of SP2 64 W3K3 (ie: skip step 2 above this time).

  13 bingo! That the installation works.

  14. as a result, one of the 63 patches that I had downloaded from MS had triggered a problem with Setup see

  15. back on the first server (with MS installed security patches and that CF installs not on). In the adobe_cf.lax of file CF (one of the files extracted in step 6), there is a line that mentions where the installation gets it is java. Find this file, and check java version Installer uses. It is using 1.6.0_14 - b08.

  16. on the way to the Java website, and there is a newer version of java (1.6.0_24 - b07). Downloaded and installed IT.

  17. change a line in adobe_cf.lax :
  front
  lax.nl.current.vm=resource\\jre\\bin\\java.exe
  After
  Lax.nl.Current.VM=C:\\Program files\\java\\jre6\\bin\\java.exe
  (this assumes that you leave step 16 install to the default location)
  Save the file.

  18. run installation ... * IT WORKS ! *

  Obviously, the built-in java provided with the installation of the CF program is no longer compatible with some changes introduced by a recent update of MS on SP2 64 b. W2K3 platform

  And now comes the interesting part. Although I made the installer to use the new java, it had not incorporated into the generation of CF (ie: in following, you see always c:/coldfusion9/execution/jre AND the java.exe version that is located in this directory is the original version, not the latest version, I forced the installation program to use).

  On the surface, CF looks OK, but I did not test any application yet.

  And finally my
  * QUESTION *.
  Var java.home would be appropriate just to point to the new java directory? I see that the structure of directories and files are not exactly the same (well close) so I am certainly not break things by doing this, but instinct tells me that if the installer beat using the old version, then something else will bring down the road if I do not use the new version. On the other hand, the differences between files and directories is enough that it makes me very nervous with my skill set java limitied to make that decision. 

  Thanks in advance!
  Byron

  Hi Byron,

  Wow great post no doubt much of the information will be useful for those who have Win03 SP2 +. Must say not come across the similar problem on Win08 r2 SP1 +.

  So, to your question. Adobe (http://kb2.adobe.com/cps/894/cpsid_89440.html) security bulletin recommends to run CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do this. I take you installed the JDK and not only JRE 1.6.0_24? After installation of monitoring JDK as follows:

  Stop the CF - stop SERVICES.msc "ColdFusion 9 application server.

  Take a copy of CF\runtime\bin\jvm.config - so you have a backup.

  Change the line CF\runtime\bin\jvm.config find "java.home =" and comment it for example:

  #java.home=C:/ColdFusion9/runtime/jre

  Add the new line like and save next:

  Java.Home = C: / Program Files/Java/jdk1.6.0_24/jre

  Note he slashes and the location of the JRE (runtime): you must point to that of JDK, because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.

  Start CF via SERVICES.msc.

  HTH, Carl.

• Windows Installer has stopped working on Vista Ultimate 64 - bit SP2

  Hello

  My Windows Installer has stopped working all of a sudden (probably common last week).  I get no error message at all.  It simply doesn't get it.  The programs can be installed and uninstalled by there own systems updated, but the changes are not reflected in "programs and features".  When I ask Windows Installer to run under programs and features, I get the usual verification pop-ups, but once I click on the last approval, nothing happens.

  I tried to install a new Windows Installer from the Microsoft Download site and each time, the program "check updates" and I get an error message that says "this update does not apply to your version," (to paraphrase).  I tried to install Windows 6.0, v-2, x 64, but when it does not work I tried all (LOL) with the same result.

  At first I thought that my computer can was struck by a malicious code, so I ran MSE, remove malicious software (FULL) Windows for January and Advanced System Care 3.  All scans is come-up 100% clean!

  I tried to restore my computer to a point 3 days does not.  As Murphy's law would have, I disabled the restore before January 12 points.

  Windows Update online might work.  I get notifications for optional updates for MSE and AFAIK, they are applied.

  Edit: One more important thing, the uninstall on Advanced System Care 3 feature does more either.  It's almost like the hooks to the installer of Windows have been removed to that also.

  Installation service seems to be very well and the value 'manual '.

  Any thoughts on the subject?  I can reload Windows from "day 1", but would rather not.  Laughing out loud.  I have my drive so.  :-)

  Thanks in advance for your help.

  Intel DG-965WH
  Intel Dual Core 2 Duo E6300
  4 gig of RAM @ 800 MHz
  Windows Vista Ultimate 64
  NVIDIA 8500 GT (512 MB)

  
  

  A BIG 'Thank you' to Marilyn!

  -----------------------------------
  

  Start, CMD (run as administrator), sfc/scannow worked!

  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  (C:\Windows\Logs\CBS\CBS.log)

  Why doesn't Windows come with a BACK order book any more?

  Thanks Marilyn!  You get a GOLD STAR for today!  :-)

• Satellite A100 - 049 (PSAAR) - registration of Windows Vista has stopped working

  My Toshiba Satellite A100-049 (PSAAR) came loaded with Windows Vista Home Premium.
  On each occasion my computer boot the, "record of Vista has stopped working" message.
  Here are the details of the error message below.
  Anyone have a similar problem or have a solution to this problem?

  Problem event name: CLR20R3
  Problem Sig 01: Toshibaregistration.exe
  Problem Sig02: 023.0.2538.28272
  Problem Sig03: 45801f61
  Problem Sig04: System.Managment
  Problem Sig05: 2.0.0.0
  Problem Sig06: 4536f344
  Problem Sig07: 111
  Problem Sig08: 123
  Sig09 problem: access to the authorization system
  OS Version:6.0.6000.2.0.0.768.3
  Local ID: 6153

  This happens especially if someone install a clean Version of Vista.

  Please call Microsoft. You must activate Vista by phone.
  As far as I know the phone call is free. After that it all works again.

• Windows Vista has stopped working properly

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  "pastafasul" wrote in message News: * e-mail address is removed from the privacy * .com...

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  If you see the icon on the desktop, do a right click on that and then left click on properties. The window that opens has all the information you need.
   
  If no icon, and then start Windows Explorer and right click on computer it followed by the left-click on it.

• Suddenly, Windows Mail (Vista Home) said "windows mail has stopped working"... can't use the program. What should I do?

  My Windows Mail suddenly said "windows mail has stopped working" whenever I open it. He will not receive messages, just does not work!

  What should I do?

  Try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?

  When I log on, a popup saying "host process for windows services has stopped working" How can I get rid of him?

  Original title: the process host

  How to perform a clean boot in Windows:
  (solve a problem by performing a clean boot in Windows Vista, Windows 7 or 8)
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the offending software application that causes the message "host process for windows services has stopped working" is displayed...

  J W Stuart: http://www.pagestart.com

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

  Original title: Windows Update stopped working Vista Home Basic.

  HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

  Hello

  Question: Windows Update has stopped working

  1. do you get an error message when you try to update?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems with the installation of updates (Windows Vista)

  Question: display Error Code 43 adapter has stopped the unit

  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows (Fixit)

  Hope this information helps.

• Windows Sidebar has stopped working

  So a week ago I had a virus, it was picked up by AVG and it has been deleted.  I always spent in SafeMode however, and proceeded to scan of my computer with AVG, Malwarebytes, Microsoft essentials, Spybot - Search and destroy, TDSSKILLER and SUPERAntispyware.  AVG found a Trojan called AGENT.something horse or another.  I deleted it.  Then I restarted my computer and it took a while to load.  Basically it froze for about a minute, and then a message pops up saying "windows Sidebar has stopped working".    I tried to manually, open the Windows Sidebar and my computer freezes for a minute and then the same error message occurs.  Also, I tried to fix it through the command prompt using this method :(http://www.vistax64.com/tutorials/117192-windows-sidebar-will-not-start-vista.html.

  So my question is how I solve this problem?  I still have a virus, or if he just has been altered by the virus?  Is it possible to reinstall the sidebar or reset it?

  It seems that there is a bit of the system of corruption, if she fails to recognize the "sfc/scannow" command try to run this utility http://support.microsoft.com/kb/947821 to verify and possibly repair damaged/corrupted packets.

• _ "WindowsUpdate_800700CB" "WindowsUpdate_dt000" ___Host that process for Windows Services has stopped working as was the closed .___The system not found the environment option entered .___User control of accounts

  I tried to download a 'Virtual Villagers' Limewire program (what was I thinking?) and then I had all these virus that messed up my computer big time.

  I have the error messages are:

  Host process for Windows Services has stopped working as was closed.

  The system could not find the environment option that was entered.

  When I try to install the updates:

  "WindowsUpdate_800700CB" "WindowsUpdate_dt000"

  The change I made before all this was trying to install Limewire "Virtual Villagers" program.

  I tried to go through the files and remove the sources of the Trojans, I ran several scans Malware Bytes (each indent to 4 Trojan horses, Rpot Kits, Ad/Spyware every time) and recently tried the Windows scanner. Who found 2 Trojan horses and withdrawn. Subsequently, I made a Malware Bytes scan which found 1 Trojan and I removed it.

  I'm not able to create, delete or modify anything in the UAC. Uninstall the habit of most of the things I try to uninstall programs and features. I'm more able to control the volume on my computer with the arrow keys and Fn. My Gallery of photos will not preview more and my computer will not install updates. My computer turns off without warning a lot and takes awhile where I can turn it back on and I hope not to have it close back 20 minutes. I try to use the system restore, but it won't work. I don't have a Windows Vista disc.

  How I have difficulty to all this and permanently delete all viruses and malware?

  Hello

  I suggest you try the following steps:

  Step 1: Try to create another user profile, and then test to see if the problem persists

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Step 2: You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click onhere.

  You can see the steps mentioned in the link below

  Windows Update error 80070422, 80244019, or 8DDD0018
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Installer has stopped working.

  Whenever I try to install anything I get this: "Windows Installer has stopped working".

  Problem started yesterday or today. Don't know if this has nothing to do with what's going on, but the computer had a blue screen when running a scan with Norton antivirus.

  When I entered msiexec /? I get the same thing: "Windows Installer has stopped working".

  -----

  Also if I go here C:\Windows\SysWOW64 perform msiexec.exe it I get this:

  Windows® Installer. V 4.5.6002.18005

  msiexec/option [optional parameter]

  Installation options
     
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
     
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  ---------------------------------------------------

  However if I go in "C:\Windows\System32" and run the msiexec.exe which is where I get:

  "Windows Installer has stopped working".

  And another window that says:

  "The application could not initialize properly (0 x 0000005). Click OK to close the application.

  ----------------------------------------------------

  Edit:

  I went to HKLM/System/CurrentControlSet/Services/msiserver

  By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

  I was able to install only certain programs.

  I was able to install the rescue of the music. But I wasn't able to install iTunes 9.2

  -------------------------------------------------------------------------

  I am running Vista Home Premium:

  Version: 6.0.6002 Service Pack 2 Build 6002

  64 bit

  How can I fix it?

  Haha. Thank you Michael.

  But I have to able to do work properly now. I'll post any major change (that I remember), just in case where someone wants to try what I did.

  ---------------------------------------------

  I deleted everything I could in my temporary files.

  Then I went "HKLM\System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" and cleared the entries.

  I went to HKLM/System/CurrentControlSet/Services/msiserver

  By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

  Restarted my PC

  HKLM/System/CurrentControlSet/Services/msiserver/ImagePath change back to "%systemroot%system32\msiexec c".

  A run "cmd" and input "msiexec /unreg" then he walked "msiexec/regserver".

  My PC rebooted again

  Profit :D

  Worked for me.

• IHost process for Windows Services has stopped working

  I get the following message if displayed in a window pop up on my screen. "Host process for Windows Services has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. IHAVE known that for about 2 days, usually at intervals of 5 minutes. My computer seems to work normally except the annoyance of constantly receive this pop-up window. Any advice greatly appreciated. Thank you

  Hello

  You did changes to the computer, before the show?

  I suggest you to download the update is available at the following link.

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  Also, check the event viewer for entries related to the error.

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• Windows Mail has stopped working when I close the program

  After using Windows Mail successfully, I close the program by clicking on the cross at the top right and immediately a box appears saying that Windows Mail has stopped working. Then, Windows Mail opens again and can be stopped as usual without the warning that it has stopped working.  How can I prevent the box "Windows has stopped working' appearing and restart the program?

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Solve problems with Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Hope the information is useful.