Similar Questions

• CarPlay & numbers with Extensions

  Hi all

  I have a question calling the phone numbers with extensions when connected to CarPlay. I have a lot of contacts with the extensions and phone numbers include a break and post numbers. Normally when you call these numbers using the phone only, or when you use a Bluetooth headset or Bluetooth in the car, the call connects, then composed the extension correctly to end the call.

  When I am connected to CarPlay and make the call through CarPlay, the call connects, but it is not dial and connect to the extension correctly. I even tried to add extra breaks, but it still does not work. Anyone else having this problem and have a solution?

  At this point, my only option is to disconnect the connection of lightning to CarPlay, wait for the phone to connect to the Bluetooth in the car, and then make the call using Bluetooth. It defeats the purpose of having CarPlay first.

  I use CarPlay in a Honda Accord from 2016 with an iPhone 7 running IOS 10. I had the same problem with my iPhone 6 s 9 IOS running.

  Update: genius of Apple confirmed this bug and asked newspapers to this question that I downloaded. If all goes well, they will have a fix in a future version of IOS 10. I'll give another update when I hear anything.

• Composition of the phone numbers with pauses and extensions?

  With the Pre, is it possible to insert pauses and extensions in phone numbers in your contacts list? And have the phone to dial them all at once when you compose?  What to do to have these numbers in your calendar for an event such as a conference call?  I would like to simply touch the number to the event and do all numbers with pauses and extensions to put me in the call.

  To insert a two-second pause in the dialing sequence, enter a T where you want than the break to appear. To include a stop in the numbering sequence, enter a P where you want to stop to appear. to call the next set of numbers after the stop, press the screen.

• even and odd numbers with level

  Hi Master,

  I tried to display numbers with level like that...

  Select the level from dual connect by level < = 10;

  1

  2

  3

  4

  5

  6

  7

  8

  9

  10

  How to display odd and even numbers with level. I tried with mod(level,0) but does not work very well.

  Please notify.

  Concerning

  SA

  
  

  Odd:

  Select 2 * level - 1 from dual connect by level<>

  /

  2 * LEVEL 1
  ----------
  1
  3
  5
  7
  9

  Scott@ORCL >

  Still:

  Select 2 * double connection by level<>

  /

  2 * LEVEL
  ----------
  2
  4
  6
  8
  10

  Scott@ORCL >

  SY.

• Page numbering with prefixes on the footer

  I am able to add page numbers with the prefixes (for sections) as a Visual in my PDF, but cannot add prefixes on my page numbering on the footer. Is there a way to do this in Adobe Acrobat 9 or what I need to get a stand-alone software to do this? Example: 1.1, 1.2, 1.3, 2.1, 2.2, 2.3, etc..

  You can specify a range of pages. In the footer, you can use 1. <1>> for three first pages and 2. <1>> for the following pages.

• Event gateway to communicate with the ports series

  I'm not so familiar with event gateways so sorry if I ask a question wrong. Can we use event gateways to communicate with the serial ports? Thank you.

  Can we use event gateways to communicate with the serial ports?
  N ° at least, not directly. Serial ports are physical, material, while ports dealing with event gateways are virtual, software.

  The event gateway is simply the code that listens to events in a Coldfusion application. He then responds accordingly. For example, the event Socket gateway is the code that listens on a TCP - IP port, then sends or receives messages via TCP - IP protocol.

• Numbers with comma in the data Cube Viewer

  Hello
  
  I want to know what to do to display numbers with comma in the data Cube Viewer. The data type of the measure in the cube is NUMBER (4.3). The default aggregation is AVERAGE. When I load the cube with the numbers of the exactly NUMBER format (4.3) - in the data Cube Viewer I see only rounded integer values without decimal point.
  
  
  If I load the test instead of cube table - the numbers are loaded in the correct format.
  
  
  What should I do to load the cube with point numbers? Is this possible in OWB?
  
  Now, I decided to use a way to go around it - simply put 1453 instead of 1.453. Then it works (but this isn't a great solution). It is the only way?
  
  Thanks in advance for any help
  
  Peter

  Hi Peter

  The cube data viewer has a toolbar with a lot of options... formatting, you can add and remove the numbers after the decimal point. From memory, I think you have to select the cells you want, you can click and select all the cells in the table and then use the button Add digits after the decimal point.

  See you soon
  David

• Generating random numbers with format 18XX88YYYYY

  I've been tryig to generate random numbers with
  format 18xx88yyyyy
  here
  18, followed by two random number then 88 followed by five random number. Here 18 and 88 are set to place one, two, five and sixth position.
  
  but I am unable to get the logic.
  
  So please help
  
  
  Thanx
  
  Achyot

  Try this:

  SELECT    '18'
         || ROUND (DBMS_RANDOM.VALUE (1, 100))
         || '88'
         || ROUND (DBMS_RANDOM.VALUE (1, 100000))
    FROM DUAL
  

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com

• Problem using applescript to put data into the table of numbers with column heads

  I have extracted the data from certain Web pages and want to place the data items in a table of numbers.  I wrote the applescript to extract pairs of data into two lists, but encountered a problem when you try to put the data items in a table of numbers.

  I hope I've isolated the problem eventually reduce version of the data table and writing.

  Calendar_Month	Alvarez	Laundry	Linen	Products
  March-2014
  April 2014
  May-2014
  Totals:	0.00	0.00	0.00	0.00

  Define theLabels to {"Alvarez", "Flax", "Laundry", "Products"}

  the nominative value {11, 22, 33, 44}

  Tell application "Numbers."

  say table 1 on sheet 1 of 1

  rowIndex Set of 3

  q Set of 2

  say the line rowIndex

  colHead theLabels point q value

  the columnIndex value address column colHead

  tell the cell (columnIndex)

  value defined in point q of the nominative case

  tell the end

  tell the end

  tell the end

  tell the end

  I arbitrarily chose to line 3 of the table to demonstrate the problem.

  Each data item is associated, due to its position in the list, with a label that determines the column of the data table, where it should be placed.

  The illustrated script pitches the 2nd data element in the list in the column headed "Lin".  This seems to work ok.  But if q is set to 1 the script fails with

  get address of column "Alvarez" in line 3 of table 1 to sheet 1 of the document 1

  -> error number - 1728 column "Alvarez" in line 3 of table 1 of sheet 1 of document 1

  It fails also with q the value 3 or 4.

  I probably did something really stupid, but I can't understand this behavior.  Advice please?

  Under: Numbers v.3.6.1 Script Editor 2.7 2.4 OS X 10.5.5 Applescript

  Two questions.

  (1) the order of the text in theLabels = {"Alvarez", "Flax", "Laundry", "Products"} and differ from the order of the text in the header row. Is this correct?

  (2) you are putting the value 22 (point 2 of nominative) in cell D3, where column heading of D = "Flax", which is article 2 of the theLabels?

  Respect,

  H

• How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

  Salvation OR engineers,

  I intend to use my gateway NI9792 in the following way:

  1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

  2. the other port to communicate with a cRIO device? If so, how can I do it?

  It seems to be a stupid question, but I really couldn't work this!

  Thanks in advance,

  Luiz

  Good afternoon, Luiz

  Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

  How to set my time on the NI WSN-9791 or NI 9792 gateway server?

  http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

  Configuration and NI WSN product guide
  http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

  Configure the Ports of double Ethernet on real-time controllers

  http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

  video installation and installation CRIO

  http://www.NI.com/SWF/demos/us/cRIO/outofbox/

  Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

  http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

  Sincerely,

  Mauro Vera.

• When I type some letters on the keyboard type numbers with the number lock.

  Original title: change keyboard type.

  have a Hp laptop, I have managed to change the keyboard accidentally and now when I type with the number lock some letters on keyboard etc not the letter that is the letter lkj type numbers become 123 of the normal keyboard. HELP have what setting I changed it looked cant find any info. I have enabled the language setting and have defined as UK can not see anything that would affect the settings. My laptop has a normal qwerty keyboard with a locket key number on the baord. Can anyone suggest how I do for this comes back to normal please.

  [Moved from comments]

  Hi Martin,

  Thanks for the reply.

  He would be grateful if you can answer these questions to help you further.

  1. What is the exact model of the laptop HP number?

  2. you receive error messages when you install the software download?

  You can try to uninstall and reinstall the keyboard software

  Step 1: Uninstall the keyboard software.

  a. click Start, type device in the search box, and then click on device in the list manager programs.

  b. double-click keyboard, right-click on the keyboard you are using, and then click Uninstall.
  c. restart the computer.

  Step 2: Reinstall the keyboard software.

  a. first of all, turn on the device, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• How to create a table/list out numbers with Boolean attributes

  Hello

  Maybe the title doesn't explain it too well but what I'm trying to do I guess must be honest, I don't know how!

  I want a table of numbers to be entered by a user, and for each of these numbers, I wish to have a Boolean value, (he will later choose what action is performed on this number)

  The table size can vary

  for example

  element numeric Boolean value

  0                       5                             True

  1                       20                           True

  2                       -5                            False

  3                       10                           True

  ..

  ..

  n                       100                         False

  I don't see any list with numerical and Boolean, maybe I just have not spotted or what I need to do somehow?

  Any suggestions please?

  Thank you!

  p.s. If someone else uses Opera Browser to post here, hitting enter work correctly for you when entering text? For me, it moves the cursor climb a line instead of to the bottom! Driving me crazy! It only happens with this forum OR

  There is no control that has something you're looking for, but a simple table of clusters can work. The cluster would have a digital and a Boolean value. It is not the largest interface, but you can do a little better by masking the display index for the table and the scroll bar visibility.

• CUCM 8.5 and "Secondary numbering" with phone SIP

  We have 8.5.1.x the standard Cicso CUCM 'skinny' phones all work very well. The problem is with SIP endpoints on a console to send Avtec. They work fine - BUT once a call is put no more of DTMF tones are sent through the line. I hear the release in the Atrium - but it does nothing at the other end. Example: Put a get call for a "tree of voicemail. Most entries are required to go anywhere. Pressing the button gives a release, but nothing happens. Looking at the Wireshark capture it appears that it is not enabled on the Cisco side (so the Avtec tech guys say). I don't know exactly what Cisco calling - I saw "Secondary numbering" once. What needs to be "activated" in the Call Manager to do. Help! Mark

  It seems that these phones are supported RFC2833. Without a view in your system and you have, it is hard to tell you in the forums where things need to be tweaked.  In this case, the TAC is a good call I think.

  Hailey

• MS Calculator written (shows) two or more numbers with a single entry

  Standard MS Calculator written (poster) two or more numbers at the same time with a single entry, as does not work properly when checking any box, (Eg. checking a box in Gmail to simply delete the message) it takes several times before it happens it's good.  I tried to adjust the parameters of 'mouse' and this does not help at all.  I am at a loss at this point, help?

  Windows 7 Home Premium OS Service Pack 1
  ASUS computer desktop CM6870 series
  Processor: Intel i7-3770CPU @ 3.4 GHz
  RAM: 16.0 GB
  System type: 64-bit OS

  Thanks for your suggestion, but it didn't work.  It is corrected now that I replaced the mouse with a new material and used the software installed, it works perfectly now.

• Contacts of numbering with number as the name blackBerry Smartphones

  OK, first post and here's what I got.

  I have contacts to many places retail with a number of store.

  example: (in coordinates) name: 1234, last name: Mountainview store.

  so I go and click on the Send button to pull up the phone and dial "1234" and it is says "no contacts" and waiting for me finish typing in this 'new' number and hit send.

  but, if I have everything start from the home screen and press the Send button to pull up the phone and then press the menu button, then click on "call for contacts" then I can compose "1234" and he pulls up the contact for the Mountianview store, so I press the button send and he composed this contact.

  so I need to know if there is a better way to enter the store info in contacts or whatever it is I do, I can type the store number into the phone to have it go back the contact without going to ' menu > call each time from the contacts that I give the floor. I don't want to use the name of the city (call me lazy, it's ok.)

  The problem is that the device assumes that if you enter the numbers in the phone app you want to dial a number to hone.

  I think that the only work around for just go first the address book and then search for the store number and dial from there

  If you Dial on disabled home screen, you can simply type the a button to go to the address book then down using your store number since there with.  You are still using the contacts function call but skip the first step of phone application.