Gateway GT5657e and Vista Home Premium 32, network problem

Similar Questions

• PC Windows 7 and Vista Home Premium computer network cannot access each other

  I have an a Premimum Vista computer with a USB printer on a network with a Windows 7 Ultimate Computer.  Both recognize each other both are visible in the network on both computers) but I can not access one or the other.  Message on window 7 says "your computer seems to be correctly configured but the resource does not."
  "Any suggestions?  I need to produce and share printers.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  In Vista, turn on password protected sharing. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. create shares as desired. In Windows 7/Vista I usually shares its office and the Public directory.

  E. After you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but that is beyond the scope of this answer. MS - MVP - Elephant Boy computers - don't panic!

• I have XP Home and Vista Home premium desktop computers. I can't print using a limited account and I can't share printer

  I have XP Home and Vista Home premium which are interconnected desktop computers. they have only two accounts.

  I am not able to get ashare a printer, or and I can print if I type something from the administrator account on the computer connected directly to the printer, I can't print using the account of this same computer - only on behalf of the administrator.

  I can't print at all using the Vista computer.  Is to show that they are networked - is do not know maybe it's that the XP needs a NETWORK map?

  I have two accounts, one is an administrator on a computer and the other is one Director on the other.  Help, please.

  There is a router.

  Hello

  Follow these methods and check if that helps:

  Method 1:

   

  Make sure discovery network and printer sharing are on by following the steps in the article:

   

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 2:

  You can also download from this link and check if it help you.

  Troubleshooting File and Printer Sharing in Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?ID=744

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fromm Vista Home Premium (with many problems) I wish back to XP PRO. Where can I find the drivers? I think that the original XP disk contains the drivers.

  Vista Home Premium (with many problems), I wish to go back to XP PRO. Where can I find the drivers? I do not think that the original XP disc also contains the drivers!

  Some computers come with a disk drivers or Drivers and Utilities .  If yours does not, look for drivers on the web site of the manufacturer of the computer.

• Network to share Internet between a laptop XP SP2 and Vista Home Premium desktop

  I hope this is the right forum. I'm a graduate student in the field of information TECHNOLOGY as well as a few certifications, so I'll have people ask me some questions on how to troubleshoot certain aspects of their computer. Given that I have not learned this yet, I'll paste the question in this case.

  "I'm trying to connect my desktop PC to internet by connecting my laptop wireless activated using a crossover cable.
  Then I went into the settings of my network to laptops and made a new internet, sharing network.
  My laptop is running XP Service Pack 2, and my office is under Vista Home Premium.
  Because I'm so used to XP I don't know how to connect my desktop computer to the internet network share that I just made. »

  What would be the best way to solve this problem?

  http://Windows.Microsoft.com/en-AU/Windows-Vista/connect-two-computers-using-a-crossover-cable

  Connect two computers using a crossover cable

  http://www.google.com.au/search?hl=en&source=HP&q=ICS+between+XP+and+Vista&Meta=&aq=f&OQ=

  Read the information in the above, Google hits.

  See you soon. Mick Murphy - Microsoft partner

• Try to configure Windows XP Pro and Vista Home Premium to connect wireless to a field internal.

  Hello. I recently graduated from a COMPUTER course that was very intense, but I don't think that it covered all the basics for me quite challenge the MCSA exams. In order for me to do, I bought a bunch of MS Press books covering ISA Server, Server 2003, Exchange, etc. My journey made us buy copies of Server 2003 and XP Professional, so that we can continue to practice at home.

  One of the things I wanted to do has been implemented a network in my home, using the software I have (not about to try 2008, although I think that one of the books I ordered comes with a version of a test - but it is in a game for the MSITP exams).

  This is how I currently have my network configuration. Currently, everything is wireless. I have 1 spare computer that I use as DC with active driectory.

  Currently I have a router D-Link DIR 655 (located in the basement) which acts as a gateway to the internet server and dhcp on my network and WPA2-PSK encryption use.

  I have a laptop with Windows XP Pro top (that I gave to my wife - old laptop I have baught strictly for the course, I took), and it is completely wireless. It is located on the ground floor.

  I have an office (located on the 2nd floor) using Vista Home Premium 64-bit. It's wireless.

  There is also a network of printers laser color next to the router in the basement, connected via an ethernet cable.

  On the main floor is also my Wii, which connects wireless.

  So, as you can see, it's a mixture of differnet devices connected through my router.  I have the Wii or the printer to connect to the domain specifically. The printer must be accessible to computers on the domain, but the wii should just be able to connect to the internet via the router.

  The spare box I have kicking around, I put 2003 on server and install active directory. I will also implement via this network storage server. I would like to put up to control the accounts of users of my wife and myself and that it uses roaming profiles.

  This works very well when it connects directly through, but how to configure something like this works wirelessly? I read something on another forum in which is setting up a wireless bootstrap, to authenticate against a Radius Server, and then log in to the domain. However I don't have the money to spend to get ISA Server.  The server will be basically be there just to provide roaming profiles and to store things out of our systems, incase we have problems with one of our computers. We could set up something for our own internal e-mail in the future, but since we live in the same House, it seems rather useless at the moment lol maybe set something in the future to let the other note or purchase or to do list. But for now, just want to configure what initially appears to be a single domain with roaming profiles.

  Everyone has tried to do that? Connection of the wireless networks in a field, with a router provides the address and gateway?

  Carlo

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 in a domain environment, and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 0x000000c1 with a canon lbp 6300dn printer and Vista Home Premium

  I have a Vista Home Premium that I try to install a canon lbp 6300dn printer on a network.  It gives me the error 0x000000c1. I got the correct driver of canon but continue to get this error? can you help me?

  It is an unrecoverable Windows, usually called error message Stop, bug verification, or more commonly the blue screen of death (BSoD).  Not a Setup error.

  You can try to install over the previous installation.

  If you can get the system for more than a few minutes or you can use safe mode, try to delete the last installed application software or driver.
   
  For the withdrawal of an application:
  1. click on start, Panel, then programs and features.
  2 Select the software associated with the printer, and select uninstall.
   
  To uninstall the driver:
  1. go into the Device Manager
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  2. find the printer driver, do a right click Uninstall.
  3. also in the Control Panel, printers, right-click on the printer and click on delete.

  Now try to install your printer with the latest drivers available on the Support site of the manufacturer.
  http://www.USA.Canon.com/Cusa/support

  Your Type of product: consumer Home & Office
  Family of products: Printers & Multifunction
  Series of products: image CLASS series

  See also these:
  Bug Check 0xC1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560183 (v = vs. 85) .aspx

  SPECIAL_POOL_DETECTED_MEMORY...
  STOP: 0X000000C1
  http://www.faultwire.com/solutions-fatal_error/SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION-0x000000C1-* 1194.html? = date order

• Compatibility: Dragon Naturally Speaking and Vistas Home Premium 64-bit

  Does anyone know if Dragon Naturally Speaking 10 is compatible with vistas Home Premium, 64-bit operating system?  Help, please.

  http://www.microsoft.com/windows/compatibility/windows-vista/Details.aspx?type=Software&p=Dragon%20NaturallySpeaking%20Preferred&v=Nuance%20Communications&uid=10&pf=0&pi=0&s=Dragon%20Naturally%20Speaking%2010&os=32-bit

  Above is what happens for Dragon Naturally Speaking Preferred 10: is NOT compatible with Vista 64 bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home Premium to ultimate problem, after reloading the system. Error message: the upgrade cannot be started. To upgrade, cancel Setup, and then choose to upgrade to a version of Windows...

  I recently had my computer HP reloaded due to hardware failure by Fry technicians.  They have reloaded it back to Home Premium, due to the fact that the initial charge.  I had already updated using a copy legal DVD Ultimate.  Now when I try to update it gives me the message above.  ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007.  At they recharge an OLD picture or something?  HOW to solve this upgrade to Ultimate.  I don't want to throw away $150.

  You've never given the full error message.

  So, we have to guess that it is she:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And your warranty with HP, Microsoft no issues.

  See you soon.

  Mick Murphy - Microsoft partner

• Compatibility of Norton Internet Security and Vista Home Premium

  I have a new laptop with pre-installed A200 Vista and Norton Internet Security.
  I can't use the send/receive button to send Windows messages.
  I spent the time considerble in the forum MS to fix this problem without success. I am told that Norton is not compatible with Vista - even if Toshiba pakage this sooftware together.
  I deleted Norton and in fact the Windows Mail Send7Receive button start working. BUT then after about an hour it has stopped working again! I have re-installed Norton but the problem is still there! I can send E-mail of Mail when I exit and restart the station.

  Can help for this problem - can it be to the ISP? I use port 587 SSL

  Post edited by: tuition

  Hello

  I studied a little more on Norton and Vista compatibility issues and the Symantec Norton Internet Security is certainly compatible with Vista!

  Also, I found a document very useful Toshiba on this subject:
  Check this box:

  Windows Mail won't send or receive emails
  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  It seems that the update of the Software Desktop SMS Installer version will help to address this problem.

• Live365 program plays more stations in Windows Media Center (the two MCE 2005 on XP and Vista Home Premium version).

  When you select any Live365 station, just have a beep. Three different computers with the same problem (XP and Vista). However, all 3 have IE8 with the same default security settings. I also contacted Live365 support for the resolution and waiting for their response. Live365 is working on other media, just not Windows Media Center PC or extender readers.

  Thought I'd share some good news, instead of a few problems.

  A month ago, Live 365 in Windows Media Center started working again on all my computers (Vista and XP). Don't know if it's a windows update, or an update of the app live365. But whatever the fix was, thank YOU!

• "Library not registered" in Vista Home Premium in network and sharing Center trying to activate the password protected sharing.

  Trying to activate sharing protected by password in the network and sharing window I get the error message "library not registered. Also, in media player, I get always an error of sharing multimedia. I think that the 2 mmight be bound. PLEASE HELP ME!

  Hi Dj,

  When he the accur first question?

  Have you tried a system restore to a point before the question accurred?

  You can follow the procedure as described below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow steps 7 to place the computer in his usual when you finished the clean boot troubleshooting

  Do the system restore to a date preceding the accurred question according to the link below:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Reply back with more information for you to help

  Kind regards

  Kiki

• FSX and Vista Home Premium problems

  How can I get good frame on FSX rates?  As I loaded Vista64 on my computer, I have averaged 3 to 8 FPS!  What don't get me, I tried all kinds of settings and no dice!  Thanks for any help!

  My computer: AMD Athlon 64 X 2 Dual Core Processor 6000 + 3.10 GHz
  8 GB RAM
  NVIDIA GeForce 8400 GS 512 MB

  Hello FlyingBlind,

  Thanks for posting in the Microsoft answers Forum.  I hope that FSX, you're talking about Flight Simulator x.  The following suggestions are for Flight Simulator X. have you installed any service packs for Flight Simulator X?  If this isn't the case, you might want to consider following this link and installing the recommended updates:

  http://www.fsinsider.com/downloads/pages/SP2-en-Readme.aspx

  Please pay special attention to the sections on Vista 64-bit.  Specifically, the section where the progress of the installation bar seems not to move because despite this, the service pack IS installed.  I hope this information is useful.

  Thank you

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.