GeForce 210

Similar Questions

• Driver for Windows 7 64 bit for the Geforce 210 M graphics card

  G ' Day, I'm looking for a driver who doesn't seem to be available on the Tosbiba site.

  The driver needed is for the graphics card of Geforce 210 m inside the laptop, and I'm looking for the * 7-64 BIT Windows * version of the drivers.

  Download the driver from the NVIDIA website fails and says that no compatible devices does this driver I tried to install. further investigation of this using a hardware detection utility online from NVIDIA. This revealed that NVIDIA has not supported this edition of the Geforce 210 m as amended by toshiba, and I wish to download from there website.

  However, this driver is not on the mytoshiba.com.au website...

  Hello

  He would be grateful if you could post your exact model of your laptop number. Otherwise it of a bit more difficult to help you

  If you can t find this driver, you can try a Vista driver. Most of them are also work on Windows 7. :)

• P7-1243: P7-1243 and Asus GeForce 210 blocking card video in the bios screen

  I have a p7-1243, which works fine on the integrated graphics, but when I installed an Asus 1 GB silent graphics card GeForce 210 it locks upwards at the start of wood screen where it says "Press esc...". "The PC is completely stock configuration. I got a 4 GB of additional ram, but it is deleted.

  I was surprised to find no updates for the chipset of your motherboard or bios. Any suggestions?

  @xxxxxx_x

  The BIOS updates are displayed under Windows 8 here.  It's your decision.

  BTW - The NVIDIA 210 known compatibility issues in some HP computers.  You might want to try another graphics card.

• HP Pavilion p6130y: does the work of ASUS NVIDIA GeForce 210 with the HP Pavilion p6130y pc graphics card

  Could what possible graphics cards you use with this pc? because I am looking for an upgrade that willl work with the 300 watt power supply

  Hello @DeAdEnDsHaDoW,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post on the issue of the graphics card and wanted to help you!  I understand that you are looking to upgrade the desktop computer and wanted to know what might work.

  Here are the specifications of the product of the GeForce 210:

  Bus support: PCI Express 2.0

  Minimum system requirements power: 300 W

  Here are the specifications of the HP Pavilion p6130yproduct:

  Expansion slots: 1 PCI Express x 16

  Power: 300 W

  Based on the above information, the Bureau should have sufficient power to use the card.  However, you may experience a lack of performance, because of the PCI ports.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• No sound after installing geforce 210 in hp pavilion a1430n video card

  I saw the notice on the change of device settings audio bios auto activated, but there is no audio device options in the bios of this model.

  Control Panel > sound indicates 'no audio devices installed.

  I installed this new geforce 210 video card (in addition to the current GeForce 6200) in order to support the 3 monitors. I have a Geforce 5200 FX installed for this purpose, but he died. The new 210 has HDMI output. Some of the responses in this forum of credit as part of the problem.

  I just need audio on the helmet of the computer - do not use any external audio speakers, monitors, etc.

  There is a long list IN Manager devices under sound, video and game controllers

  Audio codecs

  Legacy Audio drivers

  Legacy video Capture devices

  Media control devices

  4 Audio inputs from NVIDIA High Definition - where all appear to be identical properties

  Video codecs

  Show all working properly

  Any help or advice greatly appreciated

  E of T

  Hello

  Install a new video card can disable the sound chip edge check so what follows.

  Shut down the PC. Tap here to f10 as soon as you press the power button to access the Bios Menu - option is probably under the Advanced Settings tab.  Look for an Audio titiled "Onboard" entry.  If it shows as disabled, navigate using the arrow keys, press ENTER, use the arrows to select "Enabled" and click on enter again.  Press f10, select 'Yes' or 'Ok' and press on enter to save the change.

  Kind regards

  DP - K

• Cannot install graphics card GeForce 210

  original title: problem install graphic card GeForce 210 in windows vista home pre. display 32 bits disabled said as instructions device driver but cannot assign pci slot in the bios also in the instructions

  no response but contacted customer service & come to find out the card was faulty thnx anywho!

  Hello diggerjim,

  1. When you install the graphics card, is detected in the BIOS?

  I suggest that you check to see if the graphics card is detected in the BIOS. However, you just contact the manufacturer of the graphics card to have a control over it.

  Since it is a hardware related issue, your best option would be to contact the manufacturer or check with the place where you bought the graphics card.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• OptiPlex 390 DT, Palit NVidia Geforce 210 is not detected in the PCI slot (as shown in the BIOS)?

  Hello gentlemen!

  I would like to know why the graphics card is not detected in my PC.

  The graphics card is 64-bit 1024Mo sDDR3

  And the CPU has

  Intel I3, 6 GB ram

  -Installed the gpu

  -Start windows built in graphics

  -installation of the driver fails two albums and the latest drivers downloaded from Nvidia or Palit saying there are no devices detected installing

  -checked the BIOS and I saw that pci slot where my g-card displayed an [empty]

  -traveled around the bios by any disabling of options for my integrated in the card or anything... any

  -checked around dell.com and saw that nvidia geforce 210 cards are compatible with my pc model exactly, even if this compatible graphics card has been a model of Evga, not a model from Palit.

  -which is where I started scratching my head

  Is there other details, that I need to provide?

  I appreciate the help.

  The 210 was a terrible GT card when it comes to compatibility.  Brand can also make a difference. Given that the GT 210 is an old map of the series, I would say get a GT 610 rather like this one HERE and turning the GT 210.  The EVGA TG 610 is also mentioned as being compatible with the Optiplex 390 DT.  I assume that you bought a PCI Express X 16 video card and not a PCI card, correct?

• No sound after installation of Dynex™ - power 400 Watt ATX CPU & PNY - GeForce 210 1 GB DDR2 PCI Ex

  I installed the two pieces and everything works fine but the integrated sound card. my USB headset gets audio but no sound from the audio jack green light at the back of the PC. When my USB headset is not plugged in the audio icon at the bottom right corner says "no audio device installed"

  all solutions?

  EDIT: I have a HP a6120n

  Hello

  Tap away at f10 you start the PC to enter the bios menu.  Check if the Onboard Sound has been disabled here as this can happen when installing a new graphics card - if it is disabled, use the arrow keys to select Onboard Audio, press ENTER, use the arrow keys to select enabled, press ENTER, press f10 to save the change, use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• HP Pavilion p7-1423w P: Desktop geforce 210 + windows 8.1 = dead?

  Team estimate HP:

  Im a very rare problem with my video card

  My computer is:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03517270

  Windows 8.1

  and my graphics card is the following:

  http://www.gigabyte.com/products/product-page.aspx?pid=3913#SP

  (now that there is not a single disc installed from NVIDIA)

  is not the first time that I have install this video card, now the difference is that I put the pc as conditions of tissue.

  The last time that the problem has been updated the driver; but now, pc will not even start when I install the video card.

  Is not totally dead, I can see the lights, the sounds, BUT NOT SHOW ANYTHING on the SCREEN.

  If I unplug the video card pc all start normally without any problems.

  I know a very problematic video card but was normal working until I have reset the pc

  This video card was installed in around February 2013

  Hope for any help

  Kind regards

  Hello:

  You must disable secure boot and enable legacy mode when you install a video card on a PC initially provided with the W8.

  If you reset the BIOS to its factory default settings, he has will raise start-up secure and disabled legacy mode.

  Please see this link for more information.

  http://support.HP.com/us-en/document/c03653200

• Nvidea geforce 210 driver

  After you have not used my computer for several months, I decided to get out of storage and started using it again. After several updates that have been made, I noticed that windows has stopped my video card to work correctly, stating there are a few problems with the card. error43. I have the latest update for the video card. There will be another update to fix this problem? I am running windows 7 Enterprise.

  If your graphics card driver have been installed through Windows Update, change the settings in
  Updates from Windows to not to allow the "optional" updates
  Graphics card drivers are always best uninstalled via programs and features and reinstalled manually.

  NVIDIA Driver Downloads - advanced search

  When there is a problem, it can also help to run Driver Sweeper (a program open source) after you have uninstalled the drivers and after a reboot. Driver Sweeper will clean files left by normal
  Uninstall, method. Restart again before installing the new drivers.
  Always use Driver Sweeper with care do not "clean" bad drivers and only after uninstalling the drivers via programs and features.
  EDIT: Just noticed Driver Sweeper went commercial, but there is still a free version.
  The name is also changed - merger of pilot.
  (I just installed Driver Fusion - do not install the optional speed up your PC app.) These programs
  are not necessary and can be counterproductive).

  Treexy external page

  Your card is a few years old, and low end, you should get without using the most recent driver.
  v 295,73 should do, but if you go for a newer driver because you try to run a more
  recent game with WHQL versions stick.

  .

• Inspiron 530, GeForce 8400 gs, driver Windows XP

  I had a GeForce 8300 gs video card of which went wrong. I bought GeForce 210 PCI-E which was not compatible, because I couldn't find a driver that was compatible. Now, I bought a GeForce 8400 hoping I might have better luck. It is not 2 days. So I hope to get help before he gets here. Also in the case I have no luck. Does anyone know of a compatible video card not expensive?

  AMD drivers are not applicable to of NVIDIA Geforce cards.

  The Radeon drivers require DOTNET 1.1 and 2.0 Sp1 and 3.5 SP1 and 4.0

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16614

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25150

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17718

• ZOTAC GeForce GTX 750 Ti / Gigabyte Nvidia GT 710 sufficient for accelerating GPU in CC 2015?

  Hi all

  I have Photoshop 2015 and filter oil painting is grayed out. So, I want to update my graphics card. Please help me

  System Specs:

  Gigabyte GA 78LMT S2PV

  AMD FX 6100

  Hyper X 8 GB RAM

  GeForce 210 (OpenCl version is 1.0) (I need 1.1 or higher if they exsist)

  WD 1 TB purple

  Thermaltake TR2 500W PSU S

  PCI-E - 2

  If you want to suggest any other graphics card with limited budget, then it will be toasty come :)

  Photoshop and illustrator are less demanding than the first, so your cpu should be ok for them. If you get a video card only for photoshop and illustrator, you can watch the r7 amd 360 for about $90. If you want to spend more on rx 470 4 GB, it would be a good card for the money.

  CUDA is exclusively for nvidia only cards. Some software requires cuda/nvidia to work. If you use other software or plugins in addition to the adobe software, which uses the video card, you will need to get its system requirements and to see what video cards they list.

• I need to know what version of adobe flash player should I use with firefox 38.0.5 and Win XP.

  I just installed graphics card GEFORCE 210 with a new Viewsonic 23 "screen using hdmi. I installed the latest VER of Flash Player (18) and dismissed the installation. Firefox apparently told me he wanted not later than Flash Player 10 or 11. I can not even find the free download for one or the other. Help!

  Brent Hawkins

  My advice is to use the Extended Support Release - Flash Player 13.0.0.296 on WinXP - it appears about 3/4 of the way to the bottom of the page that linked philipp. This version receives security updates, but not the new features that are mainly for OS Vista, Win7 and Win8.

• Firefox crashes when it starts. I tried to reset it; I uninstalled and reinstalled no question. The problems started after I changed my video card

  Crash ID: bp-1c18c383-28e4-426c-96a7-ff97e2130906
  OS: Windows 7 SP1 64-bit
  I had to change my video card, immediately after this FF started crashing at the beginning.
  The graphics card is a Nvidia GeForce 210.
  I tried to:
  -Reset FF;
  -uninstall, delete the registry, reinstall it;
  -Windows Update;
  -Update (311.06) video card drivers
  but no way.
  I can start FF mode without failure.
  Any help will be really appreciated.

  I solved it by disabling hardware acceleration in the FF options.
  There seems to be a conflict between FF and some drivers from Nvidia.

• How to install a video instead of chipset card?

  Hello

  My problem is this: I have a Compaq Presario CQ5011IT which has an integrated Intel G31/G33 chipset, and I wanted to install a video card (GeForce 210) instead.

  I read that I had to install the card into the appropriate slot, turn on the computer and install the drivers that were on the CD given with the card, and then at some point during the operation the old into the new card should I past the video cable...

  In any case what happens is that when I install the video card, I turn on the pc and nothing appears on the screen (apparently the chipset is automatically disabled just by inserting the video card?), so I can the to proceed to installing the drivers, and obviously I don't see nothing, even if I plug the connector of the new card card (that the drivers are not installed).

  So, what should I do? Is there a way to fix this? Maybe I should install the drivers before placing the card?

  I don't know if these details are important, but the motherboard is an MS-7525 and is 300W power supply (+ 12V said 19A).

  I hope that there is a way to solve this problem!

  Thank you very much

  Elena

  Hey Elena,

  The only thing I can think of right now is that the Nvidia card supports PCI-E 2.0 and even though it is backward compatible with PCI-E 1.0, for some reason your motherboard is not recognized correctly.  This would explain why the old ATI card working as it is probably PCI - E 1.0.

  However, if you click on the link below, it seems to be that a specific Bios update that address the problem with this particular card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-73126-1 & LC = on & DLC = in & CC = US & Product = 3921638 & sw_lang = & os = 2093 & Key = null & site = null

  Important.

  Download the update and save it to your desktop. Have not the new trendy card (IE have the PC in the State wherever it was when you bought it).  Disconnect other devices on the PC except the mouse and keyboard, double-click the installer to start the process, and once the update starts to run do not touch the PC until it stops.

  When finished, restart the PC (still without the new card installed) let windows start fully and then shut down the PC.  All you should have to do now is install the new card, connect the monitor to it and start the PC.  I hope it should work properly now.

  Best wishes

  DP - K