No sound after installation of Dynex™ - power 400 Watt ATX CPU &; PNY - GeForce 210 1 GB DDR2 PCI Ex
I installed the two pieces and everything works fine but the integrated sound card. my USB headset gets audio but no sound from the audio jack green light at the back of the PC. When my USB headset is not plugged in the audio icon at the bottom right corner says "no audio device installed"
all solutions?
EDIT: I have a HP a6120n
Hello
Tap away at f10 you start the PC to enter the bios menu. Check if the Onboard Sound has been disabled here as this can happen when installing a new graphics card - if it is disabled, use the arrow keys to select Onboard Audio, press ENTER, use the arrow keys to select enabled, press ENTER, press f10 to save the change, use the arrow keys to select 'Yes' and press on enter.
Kind regards
DP - K
Tags: HP HP Desktops
Similar Questions
-
HP OfficeJet5740: No sound after installation of HP OfficeJet5740
I installed the HP OfficeJet5740 to my PC with OP Windows XP and since then, I have lost all sound. I went through the system devices and all said that it works correctly, but I wonder if I have something wrong ticked off when I was trying to install the printer that caused this.
Hi @kerasou,
Welcome to the Forums of HP Support! I read your post and see that after you install the printer software, the computer has no sound. I want to help you.
Installation of the printer software, should not affect the audio drivers on the computer.
What brand and model of computer do you have?
If it's an HP computer I may be able to help.
Good day! Thank you.
-
I have no sound after installation of service pack 2 - what to do now?
I have my operating system is Windows Vista. Before being asked to install an update (Service Pack 2) I had sound, now I have no sound. Can I solve this problem by uninstalling service pack 2 and if so, how?
How to troubleshoot sound problems that you experience after you install a Windows Vista Service Pack:
http://support.Microsoft.com/kb/948481/
05/07 / 1102:58: 36 pm
-
No sound after installation of Win 7 w/flag a1430n
Hey, I just did a full install of Windows 7 on my HP Pavillion A1430N and I have no sound. Got the red x next to the speaker in the system tray. I saw then that the research that loosened the sound is common with this update/install, but I have not seen my question specifically. When I do the audio problems, he claims that the speaker/headphone are not connected. Although they are. I have connected front and the PC using back the catch designated and used two different sets of speakers. Device Manager indicates that there is a sound device and that it works correctly. When I hit the tabs for more details on the pilot, etc., I get a very generic, "High definition Audio Device", but no details. Indicates the version of the driver 6.1.7600.16385, by microsoft. appreciate the help
Realtek HD Audio_choose High Definition Audio Codecs, contract, then download the file "Executable":
-
Original title: sound
I have windows 7 professional service pack 1, I recently installed. There is no audio drivers. How can I get them? My system is intel Pentium Dual - core E5200, 2.5 GHz.
Most often when a device does not work, it's because the driver has been corrupted.
Try reinstalling your.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1
http://captaindbg.com/how-to-update-drivers-on-Windows-7/
-
After downloading vista service pack 2, there has been no noise. Followed all advice found, software audit, software from the Device Manager. I have an IDT High Definition Audio CODEC and NVIDIA High Definition Audio on an HP laptop. I'm at my wits end as to what is happening.
Any help would be great, cheersAll the good guys, went on the HP site, installed another of their CODEC IDT drivers, even though he was no doubt a version more old, then all hunky dory.
Solved -
No sound after the removal of Norton and Mcaffe installation
No sound after the removal of Norton and Mcaffe installation
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8) -
No sound - after the installation Win7 sp1
I have no sound after win 7 sp1 app nor can I press FN - F6 to activate the sound. Any ideas?
Thank you
I forgot how I solved it, but it has been resolved. Thanks for the review
-
Dv4-1413tx - no sound after downgrade to xp vista frm
Hello...
I recently bought a HP dv4-1413tx with vista home premium pre-installed on it. I tried it downgrade to Windows XP SP2. Managed to install XP on it but feels a hell of a time with drivers... Especially the audio. There is absolutely no sound. Not even the beeps.
I tried to install UAA audio bus driver first and then the driver of HDTV LSI etc. but still no sound. I spent several hours on this subject...
Peut - some kind soul please direct me on how to go about this case?
I remember that I was in a similar situation some two years back in an attempt to re - install Windows XP on another laptop from my friend. We install everything except the audio. Finally, the technician at the shop could install for us. Now I'm away from the place... So can not go and find out that the man how it install it. It was also a HP laptop only...
I would like to add that the mute button stays red and does not respond when you press.
There is nothing about Audio in Device Manager... Maybe that's the problem.
These are the hardware ID:
===========
PCI devices
===========
PCI\VEN_10DE & DEV_06EC & SUBSYS_30F7103C & REV_A1\4 & 23FE4F77 & 0 & 0008: NVIDIA GeForce G 105M
PCI\VEN_10EC & DEV_8168 & SUBSYS_30F7103C & REV_02\4 & 22AB4E2B & 0 & 00E3: Realtek RTL8168C (P) / 8111C (P) PCI-E Gigabit Ethernet NIC
PCI\VEN_8086 & DEV_2448 & SUBSYS_00000000 & REV_93\3 & B1BFB68 & 0 & F0: Intel(r) 82801 PCI Bridge - 2448
PCI\VEN_8086 & DEV_2919 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & F8: Intel(r) ICH9M LPC Interface Controller - 2919
PCI VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA: Intel(r) ICH9M-E/M SATA AHCI Controller
PCI\VEN_8086 & DEV_2930 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FB: Intel ICH9 Family SMBus Controller - 2930
PCI VEN_8086 & DEV_2934 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E8: Intel ICH9 Family USB Universal Host Controller - 2934
PCI VEN_8086 & DEV_2935 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E9: Intel ICH9 Family USB Universal Host Controller - 2935
PCI\VEN_8086 & DEV_2936 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EA: Intel ICH9 Family USB Universal Host Controller - 2936
PCI VEN_8086 & DEV_2937 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D0: Intel ICH9 Family USB Universal Host Controller - 2937
PCI VEN_8086 & DEV_2938 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D1: Intel ICH9 Family USB Universal Host Controller - 2938
PCI\VEN_8086 & DEV_293A & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EF: Intel ICH9 Family USB2 Enhanced Host Controller - 293-a
PCI\VEN_8086 & DEV_293C & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D7: Intel ICH9 Family USB2 Enhanced Host Controller - 293C
PCI\VEN_8086 & DEV_293E & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D8: Bus Driver Microsoft UAA for High Definition Audio
PCI\VEN_8086 & DEV_2940 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E0: Intel ICH9 Family PCI Express Root Port 1 - 2940
PCI\VEN_8086 & DEV_2944 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E2: Intel ICH9 Family PCI Express Root Port 3 - 2944
PCI\VEN_8086 & DEV_2946 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E3: Intel ICH9 Family PCI Express Root Port 4 - 2946
PCI\VEN_8086 & DEV_2948 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E4: Intel ICH9 Family PCI Express Root Port 5 - 2948
PCI\VEN_8086 & DEV_294A & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E5: Intel ICH9 Family PCI Express Root Port 6-294 has
PCI\VEN_8086 & DEV_2A40 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 00: Mobile Intel (r) 4 Series Chipset processor to DRAM - 2A 40 controller
PCI\VEN_8086 & DEV_2A41 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 08: Mobile Intel (r) 4 Series Chipset PCI Express Root Port - 2 has 41
PCI\VEN_8086 & DEV_4237 & SUBSYS_12118086 & REV_00\4 & 2A17DF6C & 0 & 00E2: Intel (r) Wireless WiFi Link 5100
22 correspondent or the devices found.
===========
USB devices
===========
USB\ROOT_HUB\4 & 12221D3B & 0: USB root hub
USB\ROOT_HUB\4 & 2044AD61 & 0: USB root hub
USB\ROOT_HUB\4 & 29C7184A & 0: USB root hub
USB\ROOT_HUB\4 & 32817C7F & 0: USB root hub
USB\ROOT_HUB\4 & 37E9A870 & 0: USB root hub
USB\ROOT_HUB20\4 & 2BF3D41C & 0: USB root hub
USB\ROOT_HUB20\4 & 87AE6AB & 0: USB root hub
USB\VID_03F0 & PID_171D\5 & 24058FCE & 0 & 1: integrated Module with Bluetooth 2.0 wireless technology HP
USB\VID_0781 & PID_5150\20043513330A7FE20BF8: USB mass storage device
USB\VID_174F & PID_1107\STK00001: USB Composite device
USB\VID_174F & PID_1107 & MI_00\6 & 3AB7CE14 & 0 & 0000: USB video device
USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER_MINI&REV_0.1\20043513330A7FE20BF8&0: SanDisk Cruzer Mini USB Device
12 person or the devices found.
=============
Input devices
=============
No matching device found.
============
ACPI devices
============
ACPI\ACPI0003\2 & DABA3FF & 0: Microsoft AC adapt
ACPI\AUI0216\4 & B310638 & 0: Synaptics PS/2 Port Compatible TouchPad
ACPI\ENE0100\3 & B1BFB68 & 0
ACPI\FIXEDBUTTON\2 & DABA3FF & 0: ACPI fixed function key
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
ACPI\HPQ0004\3 & B1BFB68 & 0: A sensor of HP Mobile Data Protection
ACPI\INT0800\4 & B310638 & 0: Intel(r) 82802 Firmware Hub Device
ACPI\PNP0000\4 & B310638 & 0: Controller Programmable interrupt
ACPI\PNP0100\4 & B310638 & 0: System clock
ACPI\PNP0103\4 & B310638 & 0: High precision event Timer
ACPI\PNP0200\4 & B310638 & 0: Direct memory access controller
ACPI\PNP0303\4 & B310638 & 0: Standard 101/102 key or Microsoft Natural PS/2 keyboard with HP QLB
ACPI\PNP0A08\2 & DABA3FF & 0: PCI Bus
ACPI\PNP0B00\4 & B310638 & 0: System CMOS/real time
ACPI\PNP0C02\4 & B310638 & 0: Mother resources
ACPI\PNP0C04\4 & B310638 & 0: Numeric data processor
ACPI\PNP0C09\1: Integrated controller compatible ACPI Microsoft
ACPI\PNP0C0A\1: Microsoft ACPI battery compatible control method
ACPI\PNP0C0B\0: ACPI fan
ACPI\PNP0C0C\2 & DABA3FF & 0: ACPI power button
ACPI\PNP0C0D\2 & DABA3FF & 0: ACPI lid
ACPI\PNP0C0E\2 & DABA3FF & 0: Sleep button ACPI
ACPI\PNP0C14\0: Microsoft ACPI Windows Management Interface
ACPI\PNP0C14\NVIF: Microsoft ACPI Windows Management Interface
ACPI\PNP0C32\1: Direct Application Launch button
ACPI\PNP0C32\2: Direct Application Launch button
ACPI\PNP0C32\3: Direct Application Launch button
ACPI\PNP0C32\4: Direct Application Launch button
ACPI\PNP0C32\5: Direct Application Launch button
ACPI\PNP0C32\6: Direct Application Launch button
ACPI\PNP0C32\7: Direct Application Launch button
ACPI\PNP0C32\8: Direct Application Launch button
ACPI\THERMALZONE\THRM: ACPI thermal Zone
ACPI_HAL\PNP0C08\0: System compatible ACPI Microsoft
ROOT\ACPI_HAL\0000: ACPI Multiprocessor PC
36 correspondent or the devices found.
============
HDA Audio
============
No matching device found.
============
RAID devices
============
PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA
Name: Intel(r) ICH9M-E/M SATA AHCI Controller
Hardware ID:
PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03
PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C
PCI\VEN_8086 & DEV_2929 & CC_010601
PCI\VEN_8086 & DEV_2929 & CC_0106
Compatible IDS:
PCI\VEN_8086 & DEV_2929 & REV_03
PCI\VEN_8086 & DEV_2929
PCI\VEN_8086 & CC_010601
PCI\VEN_8086 & CC_0106
PCI\VEN_8086
PCI\CC_010601
PCI\CC_0106
1 correspondents or the devices found.Can someone please help...?
If someone who knows tell me how and in which order and what drivers to install, from the XP just installed and ready on the system, I would be very grateful... Then I will be re - install all drivers in the correct order after I freshly installed windows xp again!
Thank you...
Message edited by pjr on 20/07/2009 09:02@pjr.
Drivers for Windows XP:
Chipset Intel, (install and reboot before other drivers) here
Intel Matrix Storage Manager here
MS-UAA for SP2 (required with a reboot before the graphics and Audio, Modem driver) here
MS-UAA for SP3 (required with a reboot before the graphics and Audio, Modem driver) here
NVIDIA GeForce G 105M
Modded Drivers NVIDIA drivers 185.85 worm.
How to install under XP:
1. Download driver here, double click and select Extract.
2. download modded INF here and replace the original INF in extracted folder.
3. install & restart.Intel Wireless 5100 here
Bluetooth Wireless here
Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it. I don't know then it's dv5 guide, but a lot of hardware and drivers are the same for both models.
IDT High-Definition Audio CODEC Pilot,
1 sp41698, vista, work reported in here XP driver
2 sp41693, pilot, work reported in XP here view
3 SP39671, driver, jobs reported in XP here or here view
When you install a sound driver with checking the success is your sound work.
If there is no sound after reboot check this thread. There is information how to fix this problem.
High-Definition Audio (HDA) Modem Installer and driver here
.NET framework (required before HP Quick Lunch Buttons) here
HP Quick Launch buttons here
Alps Touchpad here
Realtek RTL8168C Family PCI - E Fast Ethernet NIC here
ENE CIR (infrared receiver) here
JMB38X card reader Host Controller Driver here
If you had for 7 unknown devices with IDs of devices such as below (buttons drivers), here
ACPI\PNP0C32\1
ACPI\PNP0C32\2
ACPI\PNP0C32\3
\4 and so onDo a manual installation
Go to Device Manager, right click on the unknown device,
Choose update driver, not to communicate.
Choose the install from a list or a specific location, not search, have-disk,
Navigate to the location of machine.inf.
Do it for the rest of the unknown devices
-
(This question was published only because I could not respond to existing similar questions without registering first.)
Problem was apparently a Thunderbird randomly hanging after automatic update to 38.4 on Windows 7 Enterprise. The process of dropping out/no response took place a few minutes after start of TB, compose messages, send or download of IMAP mail.
Shortcut to the final solution - probably corrupted files or folders at the OS level.
For those who are conducting similar research I also watched the references linked below.
En route to the solution, various obfuscation were met, all of which were interesting but NONE OF THESE solved the problem of the suspension, namely:
-back to Thunderbird 38.1 extracted from Mozilla's FTP repository
-Disable all modules in SafeMode as suggested in posts below
-deactivation of reminders on calendar, pop ups and sounds like suggested in the posts below
-turn off sounds (in the systray) as suggested in posts below and new mail alerts
-Discover, finally, only one of the half-dozen or so synchronized account IMAPs has caused the problem, which is an account Exchange-synced via the excellent DavMail (Davmail upgrade to the latest version was another diversion)
-assuming that the compaction of TB was not his work and that he is too much vacuum/zombie files left lying around, leading to a redundant cleanup using Thunderfix (http://www.parhelia-tools.com/products/thunderfix/thunderfix.aspx), was nevertheless his cleaning of employment but not a solution
What worked then...
The procedure of backup profiles recommended TB in Thunderfix and elsewhere led to discover that the copy of Windows has won at least one file during the copy. Suspecting lower level corruption, I ran chkdsk D: /f (since all data are on D: and not on C: with the operating system). No major problems found aprt of 4 files analyzed once again.
I resorted to the use of SynckbackSE to do the backup instead, noting that one of the failures was Junk.msf. That and the knowledge that the account linked to Exchange was the likely to be the culprit, I restarted and deleted everything in IMAPmail\localhost\ (DavMail connects via localhost stored files).
Restart Thunderbird (always on 38.1) and connect via DavMail pulled back all messages and folders from the source Exchange to resynchronize records localhost TB successfully. No need to use backup or same setting of TB.
Will probably now improve return to 38.1 after a period of stability.
After years of use of Thunderbird of the dowry of the year, it's nice to know that it was not primarily at fault.
REFS:
Thunderbird starts by does not respond after the update to version 38
https://support.Mozilla.org/en-us/questions/1073169Thunderbird crashes, hangs, or freezes often and seemingly randomly
https://support.Mozilla.org/en-us/questions/1062142Why Thunderbird freezes my computer after installation of exit 38 RESOLVED:
hardware acceleration = suspended new pop ups (bug message notification
1186755)
https://support.Mozilla.org/en-us/questions/1068495Thanks for the info
-
Portégé R700 - 14L - no HDMI sound after reformat HARD drive
I reformatted the HD just on my Portege R700 and sound via the HDMI TV (Toshiba TV) connection stopped working - through cable. Although the Control Panel indicates the TV speaker is the audio device by default, when you connect, no sound no fate through when I use the sound test or I play any MP4 file.
Could someone help me on how I should fix this?
Thx a lot
Hello
First, I would try to update the audio driver.
Usually the audio page of the European driver Toshiba driver should work to find, but the most recent driver is downloadable always on the chip manufacturer page
The sound chip is Realtek to try the driver for the HD directly from pages Realtek audio Manager.You must uninstall it before you install the new audio driver, one installed
After installation, do not forget that the digital output was chosen as default device
In Control Panel-> sound-> reading tab, you can do this -
Satellite L300 - no sound after installing Win XP
Hi all
had to install xp because vista is not good for me. the system does not install sound card drivers, and Device Manager, there is no listed his card.
I have yellow? marks on "PCI Device" I think it's the soundcard and "network controller".I searched this forum and got some results that looked like they can solve the problem, but unfortunately the recommended fix was removed by Microsoft.
* Before would be to install the audio driver, you must first install the *.
* KB888111.* and AUDIO KB835221 hotfix
* Here are the patches from Microsoft. Search the net for download *.* After installation, restart the operating system, and then try to reinstall the driver sound again.*
Microsoft, still have KB888111, but no KB835221, as they claim that it has been proven to fail!
any ideas?
very appreciated
g
Here is the link to the missing patch.
http://files.FileFront.com/kb835221exe/;9494950;/FileInfo.html
Hope this helps you.
Thank you
John
-
No 1110ea audio envy 15 after installation of windows 8 64 pro
No sound on my 1110ea envy 15 after installation of windows 8 64 pro.
Maybe the audio drivers hp are repaced by victory 8 drivers?
ass pls
Hello
Try the driver from the following link and see if it works...
-
Re: No sound after install Vista - Tecra M7
I improved my Tecra M7 to Vista (and then upgraded to Vista SP1) but the computer is no longer plays sounds (no music, no sound system - nothing)
I installed the latest Realtek HD driver, I have the latest version of the Bios.
Device Manager indicates that everything is working. "Speaker" icon tells me that his work (the green bar follows the beat of the music)
The volume & button Mute works - I can't get the "speaker" modifying, turning to the top/bottom/inhibition icon. I tried the headphones in and out.
I checked the bios if the sound card has been disabled it - but it seems that there is no possibility to change the settings of the sound card in the bios.
Does anyone have an idea on what I'm doing wrong here?
Maybe I can help you;
I read on a sound problem after installation of Vista it happened if XP was preinstalled on your laptop and the mute box was accidentally activated.
[No sound after upgrading to Windows Vista: http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm]
Check the Toshiba TSB article tool
Concerning
-
Satellite L350D - 12 M PSLE0E - no sound after installing Win XP
Hello
I installed Win XP SP3 on my Tosh laptop.
I have everything works except the sound.We know of a compatible for this model sound card driver in XP.
I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.I'm really struggling with this one and do not want to go back to Vista.
Reall any help is appreciated. Robbie.
Hello
I had the same problem with sound after installing XP everything seemed fine but no sound!
I found a solution;
You need to install the MS patches; KB835221 and KB888111
These hotfixes must be installed before installing driver sound!But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.
However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.
Well, in my case it worked so it should work on your laptop too!
Maybe you are looking for
-
Hello I have buy new hp laptop 15-ac 122tu product: N8M18P #ACJ. I got the install window 7 32 bit but faces many problems of pilot. Now, I want to know what linux or other OS is compaitable with this modal which contains all the drivers and software
-
D2 Hard Drive Extreme maintenance?
Recently, I got intermittent connection on my external drive problems. http://www.LaCie.com/support/desktop-storage/D2-extreme-triple/ Should I do any function of regular maintenance to keep it in good working order? I tried to run the disk first a
-
hard drive corrupted after the failure of the connection?
I have the problem that the usb device is not recognized, sometimes my devices are recognized s, sometimes not, but don't I have, I have connected my external hardrive, it was not recognized, I turned it off and on again, I thought that if I restart
-
It is said that this is a prob with Windows.net framework or microsoft office 2003 thre are updated 3 (kb2533523) (kb2468871) and (kb2539636)
-
BB10: ListView problem background elements
Hi guys,. I have a listview which elements have origins are different colors (see figure). Each element background color depends on a specific element of the element in the data model (say ListItemData.color). But for some reaason, when I scroll to t