P7-1243: P7-1243 and Asus GeForce 210 blocking card video in the bios screen

Similar Questions

• 2370ea HP and asus gt 630 graphic card grrrrr

  Ive recently bought a hp pavillion 2370ea I want to play games of the spme on it so I went and bought an asus nvidia geforce gt 630 Ive updated the PSU with a 500w, but when I turn the pc I jyst get beeps and no action monitor, is my card not compatible with this system or am I missing something , the bios options are very limited so im struggling here

  see you soon

  Hello

  Press the ESC key after turning on the PC and then go to computer Setup (f10).  Now, go to the topics of security, click Security Configuration and make sure that this secure boot is disabled. You may also activate the mode of inheritance according to the video card bios and compatibility with the bios of HP.

• OptiPlex 390 DT, Palit NVidia Geforce 210 is not detected in the PCI slot (as shown in the BIOS)?

  Hello gentlemen!

  I would like to know why the graphics card is not detected in my PC.

  The graphics card is 64-bit 1024Mo sDDR3

  And the CPU has

  Intel I3, 6 GB ram

  -Installed the gpu

  -Start windows built in graphics

  -installation of the driver fails two albums and the latest drivers downloaded from Nvidia or Palit saying there are no devices detected installing

  -checked the BIOS and I saw that pci slot where my g-card displayed an [empty]

  -traveled around the bios by any disabling of options for my integrated in the card or anything... any

  -checked around dell.com and saw that nvidia geforce 210 cards are compatible with my pc model exactly, even if this compatible graphics card has been a model of Evga, not a model from Palit.

  -which is where I started scratching my head

  Is there other details, that I need to provide?

  I appreciate the help.

  The 210 was a terrible GT card when it comes to compatibility.  Brand can also make a difference. Given that the GT 210 is an old map of the series, I would say get a GT 610 rather like this one HERE and turning the GT 210.  The EVGA TG 610 is also mentioned as being compatible with the Optiplex 390 DT.  I assume that you bought a PCI Express X 16 video card and not a PCI card, correct?

• Help! ASUS GeForce GTX 550Ti do not accept the Precision T3400

  Hey guys,.

  I've upgraded an abandoned T3400 I received through work.  I upgraded to a C2D E7400 to a C2Q Q9550, equip the new memory, a 60 GB Intel SSD which is my boot drive and tried to install a 500 GB Western Digital Caviar Blue makes clicking noise at startup and is not recognized by the BIOS or Windows.  But the main thing that interests me is why my T3400 does not recognize my Asus GeForce GTX 550 Ti?  It is listed in the BIOS and Device Manager in the form of generic VGA card with no. make or model number.  I tried to update the BIOS with software from ASUS site but I get an error message saying something in the sense of "this device is not defined in VBIOS.  I don't see where else to go and I would like to take full advantage of this card.

  Thank you

  Sorry,

  Device recognized now, close the message.

• problems with Prem El 14 with 4 k make export and record... ghoulish 2 video on the laptop cards be causing problems?

  Had problems with the 4 video editing k with an old laptop i5 with memory on board and recently bought what I thought would be a better laptop computer editing video.  The ASUS GL552VX laptop has a 6700 CPU i7, a solid state drive OS, 16 GB of RAM and a NVIDIA GTX 960 video m with 4 GB memory card

  Unfortunately I had problems frustrating edition of 4 videos k on the ASUS and export to 4 k with my new Setup.  It seems to work well with 1080 media

  When I try to export the edited 4 k media on the timeline, it will not be saved or export but indicates simply is to save but a 4 minute video is same not start saving /rendering, not to mention export after an hour.  Finally, I thought that was my success today, but he ceased to save 93% during the export.

  When reviewing similar since 4 k problems posted on this forum, our expert resident, Romano advises that the 960 M will not help with first items 14 and that the NVIDIA card can actually cause a problem because the second mother 'onboard' Council on the ASUS video card.  There is little other info on it except a mention that power off of one of the video cards may be useful.

  If Mr.  Romano or any other users of knowlefgable or experts can throw some lite on my k problems 4 it would be greatly appreciated

  PROBLEM SOLVED! ??

  Reduce the resolution of 4 k display my laptop computer ASUS 1920 x 1080, adjusting the W10 to 125% and NVIDAS and INTELs scaler directly download site and tried to update the graphic display ASUS drivers two.

  Three things or a combination did the trick!  Note: I had put previousll to update the drivers through driver latest ASUS Web site post utility, but read that drivers should always be downloaded directly from the manufacturer's Web sites.

  Video test 4K have been edited in Prem El and exported to 4 k without a hitch.

  Crossing my fingers that I could solve the problem

• (Redirected) Alienware x 51 will not be closed. Fans and lights still on. Can not enter the BIOS at startup.

  Hello

  My Alienware x 51 will not be closed properly. Fan and lights constantly. I need to hold the powerbutton to shut it down.

  Its an Alienware X-51-purchased around June 2012.
  GeForce GTX 555
  Intel Core i7-3770 CPU @ 3, 40GHz
  8.00 GB OF RAM
  Windows 7 Home Premium

  The problem started when I upgraded my BIOS version A06 to A13 (running A14 now). Now, whenever I turned off my computer, the lights are still up and the fan runs. In order to stop completely, I have to press the "switch" button.

  My warranty expired a year ago.

  Anyone know how to fix this? I suspect there is something wrong with my motherboard, since I can't even get into the BIOS setup when I start my computer.

  Has anyone tried to replace the motherboard? What type of motherboard do need me? Is it possible to buy the "original" Alienware mobo?

  I hope someone is able to help. Comments or suggestions are welcome.

  Anders

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Flight Simulator panels and add on models fails to load on the main screen

  Original title: problem FSX and windows

  Some of the panels such as the F-18 and add it on the templates may not appear or do not come up on top of the screen when picked up. I just reinstalled windows and do not know what happened during the installation. I'm not sure if all the main files are missing for something wasn't going to install it. I run FSX with acceleration pack and is a 32-bit microsoft windows xp.

  Hi United869,
   
  Try these steps and check the result.
  Step 1: Download and install the drivers for Windows XP-compatible video card.
  a. visit the video card or the system manufacturer's Web site to download the driver.
  b. install the driver and restart the computer for the changes to take effect.
  c. start the game and check the difference.
   
  Step 2: Adjust display settings
  a. right click on the desktop, click on properties.
  b. click on the settings tab and adjust the screen resolution at best.
  c. click ok to apply the changes.
   
  Step 3: If the problem persists, reduce the game to the minimum settings. To do this, follow these steps:
  a. start the game.
  b. click on settings.
  c. click Reset defaults.
   
  See Troubleshooting of problems in Flight Simulator X graphics
  Step 4: Check the Windows updates to see if there are updates available for flight simulator
  a. see using Windows Update for Windows XP

  See Solutions for the Flight Simulator Centre

  Visit our Microsoft answers feedback Forum and let us know what you think.

• G7 - 2233cl: 8.1 to Windows at startup in the office and I would like it to start in the start screen

  At the start, and after I entered my user name and password, the computer opens the office. I would have rather it would open to the SPLASH screen instead of the desktop computer.  I, m new in 8.1 for Windows so if someone could explain to me how to change this setting any share on the computer I would appreciate it.  Please, be specific and do not assume that I know nothing Windows 8.1 because as I said above I am brand new to it.

  My 1st time using this forum, so I couldn't even post that to the good advice - hope that is not the case :-(

  Thank you

  Hi there @8dakota8,.

  Thank you for visiting the Forums HP's Support and welcome!

  I read your post on the Forums of HP Support and see that you are new to Windows 8.1 and the HP's Support Forums. Please use the Forums from the HP Support, if ever you have any questions or concerns. We are always here to help!

  You mentioned that you would like to know how to start from the start, instead of your desktop computer screen.

  I found the instructions for you on how to move the Office to start instead. I quoted them here for you.

  Source: choose where to go when you connect

  First, open Taskbar Properties tasks and Navigation by hitting on any fly in the right edge of the screen, type search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking on search), enter in 'taskbar ' in the search box then touching or clicking the taskbar and Navigation in the results.

  

  To start at the beginning:

  Press or click the Navigation tab

  Clear the checkbox "go to the office instead of start... ».

  Click on apply

  Click OK.

  Restart your laptop and make sure that you see the start instead of the desktop computer screen.

  I hope this has helped! Please let me know if that solves the problem by marking this post as an acceptable Solution.

  Have a great day!

• I can't run in windows xp screen goes to normal boot options and mode safe but keeps coming back to the same screen

  I can't get windows xp to run - I set a restore point - rebooted - ann that he goes to the economy/regular mode promp but when I try to open windows it just brings back me to the same screen.  Tried to run the system restore but disc is not xrecognize it. Help!

  Thank you Gary

  Do not follow exactly...

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Internet Explorer starts and displays a web page saying the PC is locked and requires £100 to unlock, this page covers the entire screen and if there is no way to get away from this

  our laptop has two users. A user can log in and use internet via internet explorer or firefox. the other uses when connecting.  Internet Explore starts and displays a page web teling them in locked PC requires £100 to unlock, this page covers the entire screen and there is no way to get away from her. You must change user to operate using laptop computer

  * Original title - performance and security in Internet Explorer *.

  Hi Anthony,.
  Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• I returned to windows 7 on my laptop Acer 5253 10 Windows and I lost my network card driver in the process.

  * Original title: jake

  I returned to windows 7 Windows 10 on my laptop Acer 5253, apparently, I lost my network card driver in the process. I want to download a network card for a usb key to solve the problem, but I don't know how. I have no internet access on the Acer so I can't download directly. I not had a disc with disks on it to Acer, they came preloaded. I am running windows 7 pro on the Acer and Dell desk top on as I type. Can someone HELP me understand this? I am not at all computer savvy and need help.

  Using another computer, visit the ACER support for your computer and download the drivers for a USB.

• Windows Media Center will not download updates to the Guide. Netflix and Internet TV options do not appear on the menu screen.

  I tried to configure Media Center for Internet TV and Netflix. I have Setup several times and attempted to manually download the updates. So far, neither option appeared on the menu screen and I repeatedly received an error message when you try to download updates to the guide that directs me to check the update log. I find the event log, and that's what he said:

  * 10:44:58 - test of internet connection. 10:45:01 - established connection. 10:45:02 - directory of recovery. 10:45:03 - directory of recovery. 10:45:04 - directory of recovery. 10:45:05 - Directory of recovery.

  * 10:45:05 - cannot retrieve the directory (error: invalid security token.)

  * 10:45:05 - SportsSchedule the package is not available. 10:45:05 - SportsV2 the package is not available. 10:45:05 - ClientUpdate the package is not available. 10:45:05 - NetTV package is not available. 10:45:05 - MCESpotlight the package is not available. 10:45:05 - MCEClientUX the package is not available. 10:45:05 - broadband package is not available. 10:45:06 - errors during the last update. 10:45:06 - retries at 2009-10-25 04:54:37.

  Also, when I tried to contact support by email and has been asked to enter my product ID number to verify the activation, I was told it was not valid. I repeatedly entered it exactly as stated on the page of the system. I also activated the software certified on the same page of the system.

  Any help would be appreciated because I would really like to be able to use these features.

  Thank you.

  I had this same problem. That's what I did which appeared to fix (not sure if that fix or if it sets just itself). I ran the mcupdate.exe file located in the C:\windows\ehome\ directory (or some windows player is on). Yet once again, I'm not sure if this corrects the problem, or if it randomly determines.

• Project overview shows the black screen and it makes perfectly like black video, but the comp. Overview displays the entire video and effects

  

  I feel that I'm missing probably something obvious. I have a MP4 video I imported into After Effects and then used the tool to paint on top of for a kind of Rotoscoping. I can get a preview of the video with effects perfectly in the composition/layer window, but either the video or the effects will be never seen in small project window in the upper left corner of the screen. When I visited the composition, it comes out completely black, just like in the preview of the project. What should I do to fix this?

  Thank you!

  You set the only layer in your composition to a guide layer. If you don't know how that enable or disable him layer 'guide' in the search help field at the top right of the app and read.

• Can someone help me with printing. My settings have been changed. I have a printer Epson Stylus and pse 13. I can't access the configuration screens that they show that I need to access.

  I can't access the configuration screens that they show that I need to access.

  What is a forum. I don't understand. I'm 63 and they will not access my computer at ADobe

  I can't access the configuration screens that they show that I need to access.

  What do you need access? When you encounter a problem?

  What is a forum. I don't understand.

  A forum is a place which provides for exchanges between users.

• I have new asus GL725G fresh out of the box, the windows 10 and the nvidia geforce 960 m card video.

  PhotoshopCC seems to have a problem with the display driver boards how to operate?

  Hi cathygeo,

  You need to update your graphics card drivers: drivers | GeForce

  Kind regards

  Claes