Generate support tech UCS C-Series server logs?

Similar Questions

• Max UCS C-Series rack servers

  Is there a document that indicates the maximum number of rack servers supported in UCS C-series? I did some research and did not happen to a hard number as there are blades.

  Thomas

  Currently with 1.4, the supported maximum is 19 (with a 6120) / 39 (with a 6140).

  If you look at the attached picture, it shows the wiring necessary for the integration of the series c with UCSM.

  Management (CIMC) passes through a 2248 while data cards (10 Gig ports) go directly into each of the 6100's.

  Assuming no B series and 1 connection to the each FI 2248, you end up with ports 19 or 39 for a 6120 and 6140 data respectively as only fixed ports on YEW can be Server deal with. It is here that the limitation origin currently.

  Thank you

  -Matt

• where are the location server log and the dimension to generate the error file located?

  I am running a build script and I got this error. Can someone tell me the location of the files below? (The server log and Dimnension generate error file)
  
  Construction of Dimension ERROR - 1007083 - failed. Error code [1090004]. Check the ser
  file log of worm and the dimension generate file for possible more info...
  
  Thank you

  I guess you are on Version 11 as your last post was on this version.

  You are customer of the EAS, take a look at \Hyperion\products\Essbase\eas\client
  If you load using maxl you should have a file of errors defined in the script.
  Newspaper to take a look at \hyperion\logs\essbase there will be essbase.log and application logs are lower than for example \hyperion\logs\essbase\app\Sample\Sample.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• UCS B Series it will support the consolidation of NETWORK WIN2k12 cards

  Hi team

  Can you please tell me UCS B Series will be it supports WIN2k12 NIC Teaming, if yes, please provide the document of reference for cisco.

  Thanks in advance

  Mohan.

  Hello Mohan

  Yes of course.

  See, for example.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/vic_driver...

  Walter.

• The server log

  Forgive me because I'm not that tech savvy but is it possible to display a server log in Mozilla Firefox (or any browser besides) and see why someone is 403 refused when they try to access a link that I posted? There seems to be not having only one person. Others have accessed fine.

  F0xu5er said

  I posted the link to a mobile device using Firefox. Displaying a link from a mobile device would cause the link any differently a person accessing this form one laptop, tablet or desktop computer?

  A link is a link. You don't see anything broken in the link? If this isn't the case, I think that you who can put aside. Not to mention that it is normal for all the world.

• Connect a mounting rack system UCS stand-alone server

  Hello

  I read somewhere on the dcoumentation this server from Cisco to stand alone as c210, c250 can be attached to the UCS Interconnect fabric. Can some expert cisco shed some light in there?

  I think I know,

  I'll have to plug the UCS FI External rack mount FEX and Cisco servers connecting to the FEX. Can someone clarify?

  What are the system requirements for the configuration above to UCS?

  I configured ports UCS FI as server ports and connect them to an external FEX with Twinaxial cable. But the ports are the link down. Cable Twinaxial is supported? I have to do additional configuration that we do when you plug a Nexus 5000 on a FEX?

  Any help would be apprciated.

  Thank you.

  The connection to a server in a stand-alone rack details are covered in this doc

  https://supportforums.Cisco.com/docs/doc-15034

  Dave

• Q: what are the operating systems (OS) are supported on UCS?

  What operating systems (OS) are supported on UCS?

  Rep. : UCS blades are certified for the following OPERATING systems:

  Microsoft Windows Server 2008
  Microsoft Windows Server 2003 R2
  Red Hat Enterprise Linux 5.3
  Red Hat Enterprise Linux 4.8
  Novell SUSE Linux Enterprise Server 11
  VMware vSphere 4
  VMware Infrastructure 3.5 update 4

• Support CPU VS CPU series

  Hi, I'm looking on the server according to esxi 3.5 u4. Its listed as a supported system.

  Model	Transport TA26 (B2932-E)
  Manufacturer	Tyan computer
  CPU model	Quad-core AMD Opteron 2384\
  CPU series	238 x Quad - core AMD Opteron series
  Form factor	Rack mounting
  Step by step	C2
  Number of Sockets	2
  Number of cores	4
  Memory max (GB)	64

  My questions:

  What is the support policy for the series CPU?

  It will support "AMD Opteron 2380' who of the same series as"Quad - core AMD Opteron 2384 "?

  Thank you

  As long as processors are in the same series, which you seem to be (series 23xx), they will be compatible VMotion.  And, as I said before, if you use at least 2 update, you can use CVS to ensure that they are compatible, by setting the CVS for AMD processors.

  Just noticed that you ask if you can use the 2380 place the 2384.  This should not be a problem.

  -Jon-

  VMware Certified Professional

• X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

  Hello
  Basically, Yes to your question.

  For more details;

  IMM2 Web GUI access via browser and see environmental specifications tab in the server properties menu.
  There are two types of threshold, "Higher criticism" and "upper Fatal".

  If goes on "Higher criticism", then a soft stop will be initiated, where the next depends on your operating system of his behavior causing shutdown graceful or not progressive.
  If more higher jumps "Upper Fatal", then a hard stop will be engaged, which is not a normal shutdown of the typical operating system perspective.

  Kind regards

• Why my Vista operating system will not support a lexmark Printer series s600?

  I spent the last two hours trying to set up my 'Wireless' Lexmark S605 so I can print from my laptop 32 bit Windows Vista. I followed the instructions given in the installation process and used the installation cd, but was still unable to print from my laptop. Then, I downloaded the software and complete drivers (which was the last updated February 2013) from the manufacturer's website. The first error message that I got was one of the pilots be found / had failed to install. The second error message I got was:

  "Your operating system cannot support a lexmark s600 series printer. Installation cannot continue. »

  What can I do to solve this problem, if anything? (in addition to buying a new laptop which doesn't have Vista)

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  We will try to set up the printer using the tool of Lexmark.
  All the drivers and software for Setup, configuration, and usage of your device with 32-bit Windows.

  http://support.Lexmark.com/index?docLocale=en_US&page=content&ID=DR15867&locale=en&UserLocale=en_CA

  How to reconfigure your inkjet printer to join Your Wireless Network by using the http://support.lexmark.com/index?page=content&id=HO3161&locale=EN&userlocale=EN_CA wireless configuration utility

  If the problem persists, I suggest you contact Lexmark support using this link

  http://support.Lexmark.com/share/index_ca_en.html

  Thank you

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• The question about the interconnections of fabric UCS 6300 Series

  Hello

  I have a question about UCS 6300 Series fabric interconnects. Is this fabric UCS interconnections 6300 series integrated into the extension of tissue function?  The reason why I asked this question was, when there is 6300 series fabric has been plugged UCS 5100 chassis, there is no more space to plug in extension of UCS 2200 series fabric. My understanding on the topology of the UCS, tissue extender is the connection between the blade and the fabric of the interconnections.

  Thank you

  Bob

  Hi Bob

  Yes, that's correct!

  The chassis so called FI - IOM (see attachment p52); THE IOM = FEX.

  I/O of the blade adapter to connect inside basket chassis, which connects to the built-in IOM.

  IOM is then connected to the built-in FI.

• Location of the server log alerts in 10G?

  Hi all

  Can someone tell me what is the location for the log server alerts in 10g. As we in 11g in $GRID_HOME/log/servername location.

  Kind regards

  Manish Singh.

  Manish,

  The server logs will be present under $GRID_HOME/log/host_name followed by different-2 folder containing different newspapers of the cluster process.

  Who connect you talk too much? For each specific cluster component, you will need to go into specific folders of component and regain its newspapers.

  As:

  Grid_home, journal, host_name, crsd

  Grid_home, journal, host_name, cssd

  etc etc.

  Read the link for more information below:

  http://docs.Oracle.com/CD/E14795_01/doc/RAC.112/e10717/troubleshoot.htm#CHDGGHCI

  Kind regards

  Mukesh

• How to allocate disk space for vCenter server logs

  Hello

  I plan to level 4.1 to 5.5 U2d vCenter on the customer site. One of the conditions set out in the vSphere upgrade guide is:

  "In vCenter Server 5.x, the default size for vCenter Server connects is larger than in vCenter Server 4.x. make sure that the disk space allocated for the log folder is sufficient for this increase 450MB."

  My question is how to allocate disk space for the log file and where can I find the disk space allotted to file papers to vCenter 4.1 existing?

  Just see the free space on the partition where the vCenter server logs are stored. If it is insufficient, increase the size of the virtual disk and then increase the file system to the guest OS.

• Siebel 8.2.2 / OPA 10.4.4 connector - Weblogic - Server - Logs determination

  Hello

  I use Siebel 8.2.2 and OPA 10.4.4 connector on a Weblogic application.

  The most important fact, I use the server of determination.

  The war of determination server has been configured and deployed, the connector is woking.

  I have woud like to get session data that is only available on newspapers when log4j.xml is set to debug mode

  	< root >
  	< level value = "debug" / >
  	< Ref appender-ref = "CONSOLE" / >
  	< / root >

  But I do not know where are stored the server logs of determination on the logic of the web. In the documentation it says how to use log4j.xml for determination of web which is not my case.

  Could you help me please do my logs? (I already tried \\10.200.0.61\d$\oracleBI\logs and \\10.200.0.61\d$\oracleBI\user_projects\domains\bifoundation_domain\servers\AdminServer\logs)

  Thank you.

  Orlando.

  Hi Orlando,.

  You may need to make some configuration of your weblogic server.

  In the weblogic console click environment > servers > (server) and take a look at the logging configuration.

  The setting that you probably want to turn on is located in the section advanced and is called "Redirect stdout enabled logging" and is described as:

  When activated, it redirects the standard output of the JVM that runs an instance of WebLogic Server, WebLogic logging system. The content of stdout is published on all destinations registered newspapers, like the console terminal server and the log file

  Another solution is to specify an explicit position for the determinations of the sessions server by adding an appender. For example.

  See you soon

  Frank