include a pdf to a .exe file

Similar Questions

• I can't open any .exe (including regedit.exe) file - if I try to open any program, I gives me an error that the application is not found.

  I can not open all .exe files, including regedit.exe cited as a means to correct this type of error.  If I try to open any program gives me an error that there are no application or the 'Open with' window opens asking me to choose my program.  However, I can open the Word Document, although if I try to click on any shortcut to Microsoft Word it says application is not found.

  I had a virus on my PC and used Malwarebytes to remove it.  The deletion was successful, but he seems to have created this new problem.  I don't know if it is directly related to the kidnapping, or whether the virus changed anything while he was active?

  Thanks for your help.  :)

  Your ".exe" file association is probably damaged.
  To fix it, follow the instructions on this page for the attachment of .exe file associations.  Be sure to read the note at the top of the page specifically about the special considerations to fix .exe associations.

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Severe a failure: all of a sudden all desktop-ICONS changed to "pdf-Icons", reports: "Adobe reader can´t open file xyz.exe '. I can't open any exe file!

  27.08.2015, 15:03

  Hi specialists and friends, please help me: after recommended today ' session-Adobe UPDATE JAVA brought 'JAVA 8 update successful 60': but: a serious fault occurs:

  all desktop icons after update and reboot are changed in pdf-Icons, programs behind the icons aren't more to start, clicking an icon is the report: 'Adobe reader cannot open the file xyz.exe '.

  Even in windows - start "Windows/start / all programs": all programs with ".exe" - mainfile changed their icon of adobes-player-icon and should not start, same report.

  My system is: Win 7 Pro SP1, my system has been running perfect until Adobe´s recommendation to update Java.  The procedure of update-Java-auto: apparently the same as several before.

  What went wrong? What should do now? How and where I fix the connection appearently wrong of Adobe Reader with computers exe files?

  My todays burning problem is, I have to use this computer today important obligations related to dates, especially my statement of tax, otherwise I have to pay the drastic punishment.

  What I ve learned today still and forever: never touch a running system! More than ever, with a recommendation to update to Adobe! I m so diappointed at Adobe!

  Please specialists and friends, maybe you can help me with a solution!  Thank´s in advance, Peter

  Application, the icons of file change icon Acrobat/Reader

• Possible to include a PDF signed into another PDF file?

  Hello

  This can be a bit of a strange question, and I ' do not know if this is the right forum.

  Is it possible to include or wrap a pdf signed into another pdf file. The second PDF will serve as another signed envelope.

  Would I be able to save the original PDF in a separate file?

  see you soon,

  Gary

  Of course you can. You can include a PDF file as an attachment. For example, in, select Acrobat 9: Document > attach a file

  Attached file can be recorded separately in the Attachments pane.

• Black screen when opening a pdf or exe file

  When you try to open a PDF file or an EXE file I exported from Captivate 5. When I try to open it, I get a black screen. I know that the file itself is OK, as others can open it without any problem.

  
  I've deleted and reinstalled Adobe reader and flash etc several times. Any ideas on what could be the problem? I don't have something new installed on my system so don't know why it suddenly won't work. Everything worked very well last week...

  
  

  Thank you

  You can follow the steps mentioned in this blog and see if that helps.

  There was a problem with SWF Cp5 having text animation on the latest flash player, and the problem is solved. Blog link: http://blogs.adobe.com/captivate/2010/11/solution-for-cp5-content-not-working-with-the-lat is-flash-player - version.html

  Remi - Ashwin B

  Adobe Captivate team

• How to do not include the path when creating pdf of many html files?

  I use "merge into one file" to create a PDF from many html files. However, the generated pdf file have html files path information. I wonder how to generate a pdf file without path information.

  Go to CREATE > create a PDF file of the Web Page > click the SETTINGS button in the dialog box that follows > uncheck "place headers and footers on the new page.

  Thank you!

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  

• Subvis call go dynamically within an exe file (avoiding the error 1003)

  Hello

  I use an architecture where the main program (compiled into an exe) can be supplied with a user-'plugins', which are collections of screw types inside a folder named especially compared to the exe. They can be called in the exe via 'open reference vi' provided by the corresponding strict vi types and corresponding relative paths.

  I want to avoid having to include one of the plugins in some way in the application builder, because users must be able to create own plugins that the request is totally ignore during the generation.

  In principle, this approach works rather well, since these plugins are not extremely complex, but sometimes, I get an error 1003 when loading a plugin.

  I have read many old posts on this error in this particular situation, mainly using versions of LV 7 or 8 (I use 2012). It was suggested to build a source distribution for each plugin, including everything that is used from vi.lib, instr.lib and user.lib. Indeed, it helped in my particular case - however, it bloats the plugin 'distribution' (which consists originally only a couple of the screws of the user) extremely and complicates the development user side.

  Now some good plugins run from in the exe without having to build a distribution source for them (they still use many vi.lib live) while others don't, and I have no idea why...

  These plugins are wrappers for hardware drivers that allow to control any hardware instrument within the main application via a certain API. So, in a particular case, a plugin that produces the error 1003 uses VISA series features (everything inside... \vi.lib\Instr\_visa.llb) and one without error doesn't (yet he uses several features of... \vi.lib\Utility\...).

  I can solve VISA problems in a simple way by including (only) the VISA-vis opportunity (and typedefs) inside the plugin folder and explicitly link to them (i.e. replace the VISA-vis of vi.lib with those copied to the folder of the plugin - I guess that's also what the source distribution).

  However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

  Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

  Novgorod wrote:

  However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

  Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

  Do plug-ins that work depend on the screw in vi.lib who are already part of your executable file because the main program uses these same screws?

  All the screws that your plugin needs must be available, if applicable can mean to be already loaded into memory (for the main of the application or another plugin), or can be found on the disk and load.  An executable includes all the screws of vi.lib - it includes only those he uses (and the screws that are marked always 'include' in the build specification).  I suspect that the plugins that work only dependent vi.lib screws which are also used by the main executable file.

• Stand-alone labview application (.exe file) does not run correctly

  Hi all

  I'm doing a labview application only to run on another computer (I never did this before).

  I went through the tools-> build application prompts and was able to build an exe file.

  the program is supposed to control a power meter and measures of power, then save them in a text file.

  When I run the exe, on the same computer, I compiled the exe, the program generates a text file to save data to, but he cannot communicate with the electricity meter.

  There are a few screws Sub and a dll file that are used to communicate with the electricity meter. Would it be possible that I am not say labview to correctly

  include these files when I create an executable?

  What are some common problems that arise when building stand alone applications that could be cause of my problems?

  And no one knows of any good tutorials on building applications stand alone in labview, other than the help files OR?

  Thanks for your help,

  Also, if you used the VISA, include the runtime with your Installer.

• Impossible to use variables shared when deploying an exe file

  I tried to use variables shared for some time. I have been all over the forums and still have had no luck. I can get these VI to work until I have install on another PC while they do any work. I don't know what I'm doing wrong. I forced libraries to deploy, but they still do not work on the machine, that I install the exe file. I don't think that libraries are being installed. I can't see in the Distributed System Manager. I can see libraries on other machines, but not on the one that I have.

  Have you included libraries in section always included the source files.  You did, and then change the destination of the library of media files on the Source code file settings tab?

  In the code are you using the correct path when calling the libraries deployment method.   Current path of the VI should be stripped twice and have "data\name.lvlib" built in the end.

• How can I get the VISA resource menu dropdown to be filled in my stand-alone (exe file) application automatically?

  Hi all

  Here's a simple question, if all goes well.

  I am building an application (i.e. an exe file) in a simple program that VISA allows to read and write in a RS-232 com port. When I run it before you build the application, everything works correctly and resources VISA control, which is a drop-down, menu is automatically populated with the ports available com. When I run the application on a computer without LabVIEW installed nothing appears in this window. I made an installer which includes NI LabVIEW 8.5 engine, OR Measurement & Automation Explorer 4.3 and NOR-DAQmx 8.6.1. Is there anything else I need to include? All specific settings I should do when I build the exe file?

  I use LabVIEW 8.5.

  Thank you.

  DAQmx is only for the DAQ cards of OR so I do not know why you have installed that. The driver for VISA applications is NI-VISA (surprise!)

  Add the NI-VISA run-time driver to your Installer.

• CVI exe file

  Hello, I create my application for a usb data acquisition 6008 code. I have my exe file but I want to use it in another computer that does not have Windows of laboratory. Is there a basic program should I install to run on this computer? I installed the daqmx 9.8 but got an error mising cvi.dll in windows 7. But XP works fine

  Hi FrankDM,

  Looks like you're missing the LabWindows/CVI Run-Time Engine on the target computer.  You need it on any computer that you want to run a .exe ICB.  The best way to solve this problem is to build your application in a Setup program.  With a Setup program, you can include the .exe and the execution engine in one package.

  You can do this by going to: Build > Distributions > manage Distributions

  Click new, and then set the new installer, you want to create.  When you are finished, a "Edit" window will open.  On the tab "Drivers & components", you can select the items you want to include in the installation with your .exe program.  You will notice that the runtime is already included.  Now, when you deploy this installation program, the runtime will be automatically installed on the target computer.

  This article provides more details on the deployment of the runtime:

  http://zone.NI.com/reference/en-XX/help/370051Y-01/CVI/programmerref/cvirtengine/

  Kind regards

• Error in exe file

  Hello everyone

  When you run the exe file in my pc clint I received the error "this vi is not executable .the full development version of labveiw is required to correct errors.

  I'm using labview Professional Version 2012

  In my pc by clint I managed an exe file it is working perfectly but after including a vi which reads hard drive serial No.. the above error is coming in my clint pc please see the attached vi

  Nagaa wrote:

  See this vi in version 11

  ".NET, configuration files, you'll want to go to this index in the help file for LabVIEW

  You must include a "MyApp.exe.config" file with this text

  
  
     <>
  useLegacyV2RuntimeActivationPolicy = "true" >
        <>
  version="v4.0.30319"/>or regardless of the version of the CLR, you use
    
  

• I can not download exe files. I have no trouble to download files with other extensions (ex: dta).

  I have a HP Pavilion dm4-2070us computer running Windows 7.  I have the same problem with internet explore and Firefox.  The file seems to download but is never-ending; It is not in my downloads folder.

  Hello number1stat,

  try temporarily disabling your antivirus software and see if that helps, if it does not work then try the following.

  This can happen if you have customized your Internet Options for the Internet zone security settings, if the option 'launch applications and dangerous files' is set to 'Disable '.

  Method 1: Reset your security settings for the Internet zone to default level. Go to "Control Panel -> Internet Options" (or use the "Start-> Run-> inetcpl.cpl-> OK' to open 'Properties of Internet') and then click the Security tab, select the Internet zone and click on 'default '.

  Method 2: Define a custom security in the Internet zone level. Go toControl Panel -> Options Internet -> Security (tab)-> Internet'. If the security is set to 'High', or if you have customized the Internet zone settings, select "custom level...". "and change the simple option,"Launch applications and dangerous files""Disable"to"invite (recommended).

  If executable file downloads fail for some sites, but you are able to download from other sites exe files, check "Internet Options-> Security - > sites-> Sites" to ensure that problem site is not in the list of 'Sensitive Sites', by default, the security level for this zone is high. Some security, including Spybot S & D software, add sites to malicious software known to this list.

• How to load an exe file in a secondary?

  I want to deploy an exe file containing a secondary on a system without the LabVIEW development environment. I want to load a different exe in the secondary.

  It missing me something quite basic, but how do I open a reference to the exe? I know how to open run and load a vi in a secondary but how I reference if it is an exe? Reference open vi says that's a unexpected file type.

  In order to avoid an argument,

  The VI includes 'compiled' objects that are updated every time that you run your VI.

  These compiled objects are equivalent for function calls in the execution of labview.

  This is not so different to the behaviour of the .net framework.

  Your basic functions such as +, -, x, /, can be compiled into microcode simple, which requires intelligence will be in the frame or the runtime

  So all is good, it depends on what angle you are looking at him.