Generation of DDL works do not, after restart Open-Petite not found

Similar Questions

• Bluetooth Lenovo S10e has stopped working - device not found / not recognized USB device.

  Hello

  For no reason that I know, installing bluetooth on my small S10e has stopped working.

  I noticed a few times when stop I had a "BTstackserver" does not message.

  I use the laptop to download regularly from a device compatible bluetooth.

  Today, when I go to connect, it says "bluetooth device not found".

  "Verify that your device bluetooth is properly connected and turned on".

  Hardware manual displays the config of LED and is correct, that if I press the "Fn" keys and "F5", I get the menu to turn on and off both the wireless and Bluetooth. I can turn on and off Bluetooth and wireless both with this menu option, BUT when I activate the bluetooth, I get the message 'one of the USB devices attached to the system is faulty or is not recognized.

  I deleted the Bluetooth installed and re-installed software by using the two bluetooth install files published on the list of drivers on lenovo S10e. Neither one works. I know that you need to install dir C:\DRIVERS once Setup has finished unpacking.

  I tried several other obvious things but without success. I also enabled "Bluetooth coopération" in the wireless LAN settings.

  All I can do now is get to the Bluetooth device under the keyboard cover and take a look at that? Anyone who has any suggestions until I get out the screwdriver? (The unit is out of warranty).

  

  I received my replacement bluetooth module and installing it, bluetooth is working again.

  I keep getting "BTW stack server" stopped responding when stopped down, but this does not seem to cause any problems.

  Too bad that original bluetooth module did not survive barely a month after the end of warranty date...

  I'm used to a greater reliability of Lenovo.

• Overview DDL works does not as expected

  In the interest of this question, I have 2 paintings in my template and each has been designed from 2 separate schemas.  The paintings are: APEX_DEMO. CUSTOMER and APP_UTIL. ACTIVITY_LOG.  When I go to 'the DOF preview' in the menu context (right click) for each table, I get the following:

  CREATE THE TABLE APEX_DEMO. ACTIVITY_LOG

  (

  NUMBER OF ACTIVITY_LOG_ID

  ...

  CREATE THE TABLE APEX_DEMO. CUSTOMER

  (

  NUMBER OF CLIENT_ID,

  ...

  You will notice that the DOF for each table is the APEX_DEMO schema when the schema of the table, under (general) table properties told APP_UTIL.

  Why does this work?

  I mean it's somehow related to the setting of the preference: Data Modeler-> model-> physics-> default user as

  I can reproduce it now

  It cleared up as soon as I deleted the default user.

  This is the workaround.

  Thank you, I logged a bug.

  Philippe

• HP Photosmart Premium Fax e-Al: updated Windows 10 - printer no longer works correctly - not found solutions

  Windows 10 updated on my computer and I got a message to update my printer software... so I did through to tune and the HP Web site.  It does not work properly.  Ink is full, but it looks as if it was empty.  Another message said I might need extra assistance because it is Windows 10... but the site HP said that there are no solutions.  Please help!

  Hi Judi5,

  First try to clean the print head of the section of tools from the control panel of the printer. If once repeated cleaning still, you don't have no black but are sure you have ink you can try the following:

• After restart some apps not full screen more

  Hello

  Why did after a reboot and by selecting the check box which says reopened windows after restart open before restarting applications are open, but many of them have lost being mode full screen, even if they were before the reboot.  Any ideas?

  A reboot opens only the previous windows in the default position, not full-screen.

  Control-command + F after reboot will change the view Mode to full screen.

• APS after restarting Essbase

  Hove, I have a problem with the work in APS
  -After restarting Essbase - I need restart APS, because
  have error
  --------
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < SOAP - ENV:Envelope xmlns:SOAP - ENV = "http://schemas.xmlsoap.org/soap/envelope/" xmlns: xsi = "http://www.w3.org/1999/XMLSchema-instance" container = "http://www.w3.org/1999/XMLSchema" >
  < SOAP - ENV:Body >
  < SOAP - ENV:Fault >
  < Faultcode > XMLAnalysisError.1051007 < / faultcode >
  < faultstring > <! [CDATA [impossible to define active application/cube.]] [[Essbase Error (1051007): invalid login id - request failed [EssSetActive]]] > < / faultstring >
  < Faultactor > XML for Analysis Provider for Essbase < / faultactor >
  < detail >
  < error ErrorCode = "1051007."
  Description = "can't set active application/cube.» "Essbase Error (1051007): invalid login id - request [EssSetActive] failed.
  Source = "XML for Analysis Provider to Essbase.
  HelpFile =""
  / >
  < / details >
  < / SOAP - ENV:Fault >
  < / SOAP - ENV:Body >
  < / SOAP - ENV:Envelope >
  
  --------
  
  I think it's strange - APS becouse it is another application and did not have a hard link with essbase.

  Hello

  Run the below two statements Maxl on your Essbase server:

  change system session_idle_poll the value none;
  change system session_idle_limit the value none;

  It could be that useful...

  KosuruS

• "my desktop widget weather stopped working this morning, had worked for about 8 months, now it says" card not found ".

  The weather widget loaded every day for about 8 months, this morning, it has not loaded, I pulled the top of the list of widgets and once again chose the time, but now when I say that it seek to Hereford, AZ it tells me "card not found".

  WHY?

  Randerson

  Research of the question and you will get multiple threads.  In other words look for. "

  Desktop Weather widget has stopped working, location not found"either here or on Google

• mute dv4 1225dx windows 7 button does not work after restarting

  Hello world. I will try windows 7 on my pavilion laptop and everything works perfectly except the button mute who does not work (do not put on mute or turn red). I installed the driver sp45073 which is supposed to be the one to W7 64-bit. the curious thing is that it works perfectly once the computer restarts after the installation, but if I restart again, it stops working. If someone could help me that would be great. Thanks in advance,

  Well, I ended up reinstalling windows 7 64 and it works now. It seems that the problem was the installation of the drivers via windows update. I just installed those appearing on the hp Web page and there is no problem so far.

• NotificationGlobalSettings modeChanged signal does not work after restarting

  Hello

  I test this on the OS SDK 10.2.1.1927 for my Alpha of Dev C. My application is headless without long-term stop. The signal and slot work perfectly upon deployment of app on device. My slot is called as soon as there are changes to the Notification Mode of the phone.

  But once the restart of the device, for some reason any. Housing starts running headless, the signal and slot is CONNECTED, because I use the bool to check if the connection is successful. And yes it returned true for the connection.

  But in fact, my slot is not called at all. All changes may not be received. Someone at - it get the same question?

  OK, get it fixed. I don't know if BlackBerry will fix this in the operating system or not, but in case you need, then the another work-around is to delay the connection.

  Delaying the call connect to connect this signal modeChanged (bb:latform::NotificationMode:Type) to your site that handles things when the overall Notification Mode is changed.

  In my case, I tested with a delay of 3 seconds and it does not work properly. After the device restarts, it still works properly.

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• Touchpad does not work and Equium automatically restarts after a stop

  Something going wrong drasticaly yesterday. I wasn't doing anything elaborate, just work excel and I'm tired of the Tablet touch and 'connected' one infrared I smile sometimes use... it did not work too well, low battery level, I guess, so I returned to the touch pad... but the touchpad was now for some reason, doesn't work do not at all and did not since...

  Turning off the laptop and was my solution, but he has not corrected the situation... the infra-red mouse works very well but with new batteries... on top of that, now when I turn the laptop off, it stops but then automatically starts once again, when a microsoft message appears saying that the computer has recovered from a serious error.

  So since this episode, the touch pad does not work and the computer will stay off! And maybe it's me crazy, but some of the keys on the keyboard are more sensitive as they once were.

  It was a satellite, and bought only in early January.

  If anyone can help I would appreciate it a lot.

  Thank you

  Hello

  Sound very mysteriously. However, as in the first answer mentioned the function FN + F9 turn off and turn on the touchpad.
  I also recommend to check the Device Manager if all devices are working properly.
  If you find any errors, but the problem persists then the step of text should be the reinstallation of the operating system. In this case, please use the recovery CD.

  If the recovery procedure will not solve the problem, I guess there must be something wrong with the hardware and the ASP help is needed. Guys could start diagnostic tests and can locate the fault.

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• Bluetooth works only after restart

  I got my new iMac a few months ago, and since then, I had this annoying problem.
  My bluetooth mouse and keyboard don't work after a reboot, in fact all bluetooth doesn't work after reboot.

  When I start my computer and connect with a second mouse and plugged in the bluetooth keyboard is "not found" and there is not in the system of care either in bluetooth. But I googled and tried different things and makes the SMC reset and after restarting the bluetooth is rising and running after the connection...

  Do I need to restart my computer everytime I want to use it?

  Hi Anna,.

  You have an imac 27 "?

  I bought a new one and spent a total of more than 20 hours on the phone to apple care. After a month, I return two different imacs and am now on the third.

  After giving me bad suggestions a month, apple now care, it is true, now, not a month before, tell me that they have discovered a 'known problem' by which the new iMac 27 "with some configurations loses their bluetooth connectivity if an update of the BONE is made up of el capitan!  I don't see any other product you would have a problem with, even if you bought it new.

• do not proceed with the installation even after restart of firefox add-ons

  Add-ons - do not proceed with the installation even after restarting firefox, I deleted the files of 3 extensions (several times) in the other suggestions and rebooted. Still don't work yet saying will be installed when you restart.

  This has happened

  Each time Firefox opened

  == after update to 3.5 and continued to 3.6.3

  Hey even once, I did a complete uninstall and reinstall Firefox and it fixed the problem for me.