get thumbnail images to come out

Similar Questions

• Instant JavaFX saved in format JPEG always come out orange

  I have an image editing program, and I want the user to be able to save in jpeg format. The code is very simple:
  

  Image sealedPageImage = savingCanvas.getSnapshot();
  File file = new File(sealFileName);
  ImageIO.write(SwingFXUtils.fromFXImage(sealedPageImage, null), "jpg", file);

  Just one problem: the image file comes out orange color each. Unique. Time. Research into it, I found that Java has the same effect with some BufferedImages created from some PNG files as well. For example, if you convert any PNG saved brush in a JPG file using ImageIO.write (), you will end up with an orange image. If I save in PNG, it looks good, but I absolutely need to be able to save in JPG format as well. I'm guessing this has to do with some kind of translation of the color space not executed, but damned, if I know how to solve this problem, after hours of searching for a solution. Someone has an idea?
  
  Thank you
  Ian

  I had a similar problem not so long ago that was caused by transparency.

  You must remove the alpha channel to write correctly a BufferedImage in JPEG with ImageIO.

  BufferedImage bufImageARGB = SwingFXUtils.fromFXImage(sealedPageImage, null);
  BufferedImage bufImageRGB = new BufferedImage(bufImageARGB.getWidth(), bufImageARGB.getHeight(), BufferedImage.OPAQUE);
  
  Graphics2D graphics = bufImageRGB.createGraphics()
  graphics.drawImage(bufImageARGB, 0, 0, null);
  
  ImageIO.write(bufImageRGB, "jpg", file);
  
  graphics.dispose();
  

• Impossible to get the actual thumbnail image on jpeg files icon

  Original title: JPeg file icons

  I can not the icon of the actual thumbnail image on my JPEGs, only the jpeg itself icon. I tried to change the size of the icon to adults, as suggested by one of your readers, but which did not help. I also double checked to ensure I have "thumbnail" check in the view menu. I made sure the "always show icons" is unchecked in Control Panel.  Help?  All of the suggestions. I am running Windows XP.

  Hi Mjoan,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a non-Microsoft program is the cause
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Step 2: We also recommend you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I could not connect my iphone 4 for Apple TV. If the sound comes out but not images.

  Hello

  I have an iphone 4 model MD128E/A

  7.1.2 IOS Software

  IAM a teacher at the University.

  I have a connection perfect with the ipad but not iphone 4

  I could not connect my iphone 4 for Apple TV. If the sound comes out but not images.

  Can I use the iphone 4 with the appletv?

  Thank you

  The iPad can be mirrored, your iPhone does not have this feature. The iPhone can use AirPlay, but not all applications are activated (up to the developer to do)

• When I scan on my Dell AIO Printer A940, the image comes out all black in my images.

  What I am doing wrong? Sometimes, it works very well with the wizard, sometimes it comes out all black and I don't do anything differently. Not sure if this is the right forum, but I would try thinking. Thank you!

  You save all the scans in the same format?

  Just guessing... but as the problem is intermittent, I would be
  I wonder if you have problems with scanning photos
  low contrast to borders... it might cause on board
  detection for failure and the scan are not optimal.

  Try to use the following steps to re-scan a photo
  that failed and you can have a different result.

  Place the picture in the scanner and go... Photo of tasks.
  Get pictures from camera or scanner...

  When the wizard starts... next left click...

  On the... Choose Preferences screen scan... left click
  the Preview button. Because of the automatic selection with precision frame
  frame the picture? If not... you can adjust the left selection
  Click on by dragging the dotted lines.

  Also... try scanning only one photo at a time.

  The site has a lot of info on digitization.

  A few scanning tips:
  http://www.Scantips.com/

• EPSON STYLUS CX4800 print the image comes out blue instead of the other colors

  Original title: printer

  Each time, I printed the picture comes out blue instead of the other colors, I have only blue. If I want to print a photo of family is blue spell. What can I do I have an Epson STYLUS CX4800

  Hello

  1. What is the color of ink cartridge in the printer?

  2. the problem occurs only in print images?

  You can search the print settings in the printer tool and select the color according to the requirement. Also make sure that the cartridges are properly ventilated and locked.

  Epson Stylus CX4800 all-in-One Printer

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQ&OID=58606&prodoid=56291067&FOID=63653&cat=30961&SubCat=30963

  You can watch the frequent question on the Epson Stylus CX4800 printer:

  Epson Stylus CX4800 all-in-One Printer - FAQ

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=FAQs&OID=58606&prodoid=56291067

  Alternatively, you can contact Epson for more assistance on the same:

   

  Welcome to Epson support

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes&expansion=1000000

  Hope this information helps. If you need help with Windows, just tell me and we will be happy to help you.

• cartridges won't come out, says paper jam, how to get out of cartridges without killing printer.?

  cartridges aren't coming out,

  says paper jam, no paper in the printer,

  How to get out the cartridges without killing printer.?

  I did the thing video together 3 times and still won't come out? I'll call hp remote and hope they can fix it thank you

• When my PC comes out of hibernation I get a message that "settings have been automatically changed to cause low-memory for operation Aero"

  * - Original title - Win7 settings

  This is related to other issues on Win7 Aero performance. I have a Core i5 processor 2310 2.9 GHz CPU and a videocard from ATI (AMD) Radeon HD 6570 (I don't know the exact specifications but minimum memory for this model is 512 MB). Well, this should be enough to use Aero. However, when my PC comes out of hibernation, I get a message that the settings have been automatically changed because of not enough memory for operation Aero. Why is it so?

  Hello

  1. have you made changes on the computer recently?

  2. is specific to hibernation question?

  3. What is the accurate and complete error message?

  Method 1.

  Open the Aero Troubleshooter: http://windows.microsoft.com/en-IN/windows7/open-the-aero-troubleshooter

  Guided Help: Troubleshooting Aero in Windows 7: http://support.microsoft.com/kb/976170

  Method 2.

  You can try to change the power settings and check if that helps.

  Power management: http://windows.microsoft.com/en-us/windows7/products/features/power-management

  Method 3.

  You can also update the display drivers and check.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-hk/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions

  I hope this helps.

• By mistake I replaced a photo with another file. The miniature shows always the original photo - is anyway I can get the original of this thumbnail image?

  By mistake I replaced a photo with another file.  The thumbnail still shows the original image.  Is there anyway I can retrieve the original of this thumbnail image?

  When a file overwrites (replaces) another... the original is gone.

  This happens usually when the replacement file has the same file name
  as a file exists and that you answer Yes when the dialog box asks you if you
  replace file a file b.

  What are the exact steps you used when the file has been replaced and
  This software has been involved?

• When you print a picture, it comes out darker I want. Is there a way to make the lightest photo?

  I reworked an old photograph, remove cracks in the original. However, when I print a photo on photo paper, the photo comes out darker I want. is it possible that I can do the lighter photo so what impression it improves?

  original title: make the lighter painted image

  Hello
   
  (1) what version of windows are you using?
  (2) lighter photo and print the photo what software do you use?
  (3) have what tool/application you used to remove the cracks?
   
  See the steps mentioned below and check if that helps.
   
  Method 1:
  Adjust the brightness and contrast of an image
  http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-the-brightness-and-contrast-in-a-picture
  Note: The above link applies to Windows Vista.
   
  Method 2:
  How to edit pictures?
  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-edit-photos-FAQ
   
  Method 3:
  Windows Live Essentials: Photo Gallery
  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started
  Hope this information helps

• How can I lock the position of thumbnail images in their files?

  Start > My Documents > folder my pictures (100 thumbnail images with names)

  The menu View Menu drop-down has 6 options for viewing: film, thumbnails, tiles, icons, list or details. No matter how I arrange these images by dragging them to my desired job they always get reorganized after the close then reopen the case. None of these 6 options they held in the order that I dragged. I wish it works like the desktop icons, they stay where I put them.
  I have 2 of most of my images. An original and that changed with each having a different name. I want to keep these side-by-side in the folder, but different names bring them to be separated when the file is closed and reopened.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I suggest you try the procedure described in the article and see if it helps.

  Changes in the size, the view, the icon or the position of a file are lost
  http://support.Microsoft.com/kb/813711

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See the article for more information.

  How to arrange files using folder views in Windows XP
  http://support.Microsoft.com/kb/306554

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• says it is printing but nothing comes out

  All-in-one HP Psc 1350

  X.7.2 OS

  My utilities said printer sends the document to the printer, even shows % finished (no message offline or idle), but nothing comes out of the printer.

  Also impossible to install the software as "PowerPC is no longer supported.

  Thoughts?

  Hi the4kosmos,

  Indeed the software on the CD supplied with your printer, or also the software available on the HP download pages are not compatible with Mac OS 10.7 Lion. However, you can install the HP Printer Driver Update 2.8, which contains the drivers printing and scanning (via print & scan, preview or Capture of Image).

  You may already have? If not and you use a different print driver, I suggest that you simply remove the current printer queue. Make sure that your device is connected directly to the USB port on your Mac. Then add the printer and you should get a message that there is software available to install - accept, so installing the respective drivers. See this document for more details: OS X 10.7 Lion: install and use the printer with Lion

  If this message does not - maybe you're not connected to the internet - you can also download a full package of the HP Printer Driver Update 2.8: HP v.2.8 OS X printer drivers

  Information on how to scan without the HP software, you can find here: How to perform a scan in Mac OS X 10.6 and OS X 10.7 without use of the HP software

  On the question of printing, make sure that your device is connected directly to the Mac's USB port and the USB cable is not longer than 3meters. You can also try another USB port and USB cable to another if the problem persists.

  Hope the information is useful.

• My video files do not automatically create Thumbnail Images

  How can I get my files video back to generate thumbnail images? At the moment only my MKV files are generating of thumbnails, but regarding my AVI, MP4 files, WMV and other files like those, they are just showing the default image of windows media database. And also is it possible to do it without using a third-party codec pack because I think that's the reason why it happened in the first place, I've been using Divx 7 for Windows.

  Hi Bryshon89,

  Welcome to the Microsoft Answers site!

  Go to Windows Explorer and the menu bar, click Tools and then click folder options.

  Click the view tab and make sure that the option "Always show icons, never thumbnails" is unchecked.

  You can also try to create a new user account and check.

  To do this, please go to Control Panel -> view by: category -> Add or remove user accounts -> create a new account. Please see if the problem occurs in this user account. If this isn't the case, we may transfer personal files to this account to solve the problem.

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  To generate thumbnails of your media, you can also download and install a third-party codec pack on your computer. Search using your search engine preferred for more information.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• QuickTime h.264 first CS6 comes out pixelated and low quality

  I'm working on iMac OS X 10.7.5, trying to export to quicktime square pixels video h.264 1080 p 24 fps first CS6, but the video comes out pixelated and of poor quality. Help, please!

  Thank you all so much for your help! I finally managed to get a good export with the following parameters:

  Format: QuickTime

  Screening: Custom, 1920 x 1080, 24 fps, progressive, quality 100, H.264, target 6 Mbit/s, 6 Mbit/s AAC Max, 48 kHz, stereo

  Go to maximum depth, 24-bit

  Advanced settings: key frame all 72 images

  Bitrate settings: Limit date rate to Kbps 6 000

  Use the maximum Render quality

  The only thing that so I was missing before with mediocrity, output was tick the box "key fits all 72 images."

• Design a business card - result comes out too small

  I have some experience with Flash Professional CS5 and use it to help design a business card.  So I'm not creating an application to create a business card.  I'm creating a static design I'll probably export as image and take to a printer.  I feel more comfortable in using Flash to do this at this stage.  The design looks good in Flash CS5, but when I export, it is too small.  I measured a physical 87 mm x 49 mm adapter, so I made the step of this size, using millimeters.

  I exported as a PNG, print design and it comes out like 66 mm x 37 mm - the correct proportions but it is about 75% of the size I want!  I tried editing design and open the HTML in a browser, but it always comes out looking for little ones.

  What I am doing wrong?  I guess I could anticipate the narrowing and define my step to 116 mm x 65 mm which seems silly.  Why should I do this?

  If you take your work to a printer, first call and get the specifications of what kind of files they will accept. My guess is that the .psd files would be one of them. You can also get the specifications for resolution, sometimes called points per inch (DPI) that really matches pixels by when we're talking resolution 'screen '.

  The reason why I propose 300 dpi for printing is because it's more or less the lowest resoultion standard used for printing... and it could even go higher.

  It's so any image, jpg, png, tiff, gif 1050 wide x 600 pixels high, when printing at 300 ppi will be exactly 3.5 in. by 2 in. (card format). The only time where it would be larger print is if you use a lower print resolution... say 150dpi... then it would print 7 x 4 in.

  BUT then the printer would be taken exactly same amount of ink and spreading it over a much larger area, with the result a much lower quality photo. By placing points of ink closer together (300 points per inch rather than only 150 points of ink) the quality is much higher.

  But your best bet is to speak directly to the printer, they will have the exact specifications, they are looking for.

  Good luck!

  Adninjastrator