Gets the error on a blue screen: SYSTEM_SERVICE_EXCEPTION with the new computer to the gateway Windows 8.

Similar Questions

• error on a blue screen after you set new Athlon Proc and motherboard - Strop 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)

  Original title: I need emergency with a blue screen error after new Athlon Proc and motherboard.!

  I had to fix my computer professional brothers due to its motherboard out. So, I advanced and ordered a motherboard latest and processor and also much more memory because the PC was about 6 years old. After installing, I he started and configured the BIOS and thought that it should start right up because it was working fine until the motherboard is out and also I left to himself, the hard drive that has XP installed, because he was also big enough for what he needs. But instead of cranking up XP, I get this error every time even when I try and boot in safe mode.

  I have also ordered him a new copy of Windows 7 to update his OS, but until I can get into XP and do an upgrade, I'm stuck. (I have to do an upgrade because of her inability to save his business files before exiting the motherboard.)

  * Without the [] error code: [stop: 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)]

  Any help will be greatly appreciated, thank you.

  There is the old motherboard-specific drivers (for example, video, network, bridge, BIOS, etc.) in XP loads that are not compatible with the new motherboard. Conversely, you may need drivers specific to the new motherboard (see the disc that came with the motherboard for details). You might have to perform a repair installation on the existing XP. When you started on the XP installation disc, do not take into account the first mention of repair and then accept the option the second time, you are prompted to repair the existing installation.

  To be honest, you also get a new drive of 500 GB for Windows 7. A hard drive of six year, or approximately 80Gb (...?) and who will get eaten up real quickly by installation of Windows 7. In addition, I don't think you can update directly from XP to Windows 7. I'm sure that there must be a Vista installation in the meantime, but I was called incorrectly.

• Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb?

  Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb? He did NOT finish the task is content to any screen blue screen saying it's bad it's bad, your computer is messed up bigtime, so-to-speak

  Hi Cynthia,.

  1 have you ever done any hardware or software changes to the PC?

  2. What is the brand and model of the PC?

  3. What is the full error you get when you try to evaluate the computer?

  Audit of the statues of the device in the Device Manager.
  a. click the Start button, type devmgmt.msc and press ENTER.
  b. check for any exclaimation mark and the status of the devices.

  Follow these methods.

  I suggest you to first run the resolution of performance problems.

  Method 1: Open the resolution of Performance problems
  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 2: Disconnect non-essential external devices and try to evaluate the computer.

  Method 3:  Also, temporarily disable the antivirus and check the question.  Anti-virus programs are sometimes called causes this problem.

  Turn off the Antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• Help me to get rid of what I get a message on a blue screen that staes that one of my drives should be checked for consistency

  By turning on my PC, I get a message on a blue screen which staes that one of my disks needs to be checked for consistency. It gives me the option to cancel within 10 seconds after which it loads normally but the screen seems suspicious. Someone at - it ideas?

  Microsoft does not send messages to you directly to your PC. The message arrives directly from your own PC.

  Click on the link on how to perform a disk check and continue with it.

  http://support.Microsoft.com/kb/315265 how to perform disk error checking in Windows XP

• Need to solve an Error Message 7B - blue screen of death/boot loop

  Hey community,.

  I need help. I'll try to find a way to resolve the error message on blue screen 7 b on a laptop HP Compaq 6710 b using XP, but he took trapped in a loop of boot BSOD and I can't access the command prompt to try to fix it. The situation is further complicated by the fact that the laptop has never been saved, and there is no XP discs for me to reinstall from.

  Wipe the drive and starting over is not a huge loss, but I need instructions on how to do that, without being able to use the last good config or the factory restore to XP disks.

  I'm sure that this information is on the internet somewhere, but the search engines sent me on a wild goose chase and I really hope I can solve this problem myself. I've only worked with Vista and need guidance on this.

  If anyone knows what to do, Please HELP! Good karma coming your way!

  Thank you

  Sryan2930

  Usually, I get this error when you try to transfer a hard drive from one pc to another, or after replacing a motherboard. The problem is probably the chipset/mass storage drivers.
  I had limited success by starting in safe mode and (re) install the drivers downloaded from the manufacturer's website.
  Here is the link to help you: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3356622&taskId=135&prodTypeId=321957&prodSeriesId=3356620&lang=en&cc=us

  I hope I helped!
  Brian

• When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equal

  When I connect broadband connection. a blue screen appears with error driver_irql_not_less_or_equ

  . DMP files ar bellow:

  https://onedrive.live.com/?CID=BF931C2E054B2BA5&ID=BF931C2E054B2BA5%21105

  Original title: driver_irql_not_less_or_equal

  Accidents were not conclusive.

  BugCheck D1, {29, 2, 0, fffff880018b9f2a}

  Probably caused by: ndis.sys (ndis! ndisXlateReturnNetBufferListToPacket + 2 a).

  Follow-up: MachineOwner

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 0000000000000029, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
  Arg4: fffff880018b9f2a, address memory

  Debugging information:

  Update your network drivers, preferably from the support page of the manufacturer of your computer, which is strangely not available at this time. If you can't find a version update at Dell, try Realtek, linked below

  Identification information of the machine [of Smbios 2.3, DMIVersion 35, size = 2590]
  BiosVendor = Dell Inc.
  BiosVersion = A11
  BiosReleaseDate = 30/11/2006
  SystemManufacturer = Dell Inc.
  SystemProductName = OptiPlex GX520
  BaseBoardManufacturer = Dell Inc.
  BaseBoardProduct =
  BaseBoardVersion =

  OptiPlex GX520

  http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-GX520/drivers

  Note: This machine is pretty old and I see no driver support beyond Windows XP.

  Image path: \SystemRoot\system32\DRIVERS\Rtnic64.sys
  Image name: Rtnic64.sys
  Timestamp: Fri 30 mai 11:12: 23 2008 (48401957)

  Description of the driver: Realtek Ethernet NIC driver

  Driver update site: http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=10&level=3&Conn=2

• Windows XP "error on a blue screen.

  I got the "blue screen error" after receiving an alert of possible virus.  Now I can not even past the 'blue screen' and have tried the various functions of "F key" in all 'modes '.  Always on the blue screen.

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer.

  Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  All safe mode does not work, please help me. Any idea would be great at this point, I'm a little desperate...

  Thank you

  It could be a virus go dl on a thumb drive combofix his bleepingcomputer and then restart pc continuously press f8 again and again and again until it appears safe mode then go into safe mode with network once started in SafeMode plug dirve thumb and run combo fix, it might take some time

• (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen

  Original title: Blue error screen

  I bought a laptop Toshiba Satellite M840. When I took my laptop to work, when all of a sudden my laptop crashed? It came with (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen. The problem is still ongoing and happens at least once a day, and it seems to be crashing more often?

  I created minidumps.

  https://onedrive.live.com/redir?RESID=B4BF3E5538F50D20! 119 & authkey =! AOTgLWC39ykXKi4 & ithint = % 2cdmp

  Can someone help me solve this problem? Thanks in advance.

  There are two questions.

  1 - athw8x.sys (your wifi atheros driver)

  2 - Symantec.

  I would completely remove the atheros driver and remove Symantec and use the built in Defender

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I go to build the disk I get an error from Adobe that says "Access denied", just as I have upgraded to Windows Pro 10.

  When I go to build the disk I get an error from Adobe that says "Access denied", just as I have upgraded to Windows Pro 10. I went to another computer Windows 10 and it burned it perfectly.  Has anyone encountered this error in 6 yet?

  Make sure that you run 'as administrator'.

  A mistake that occurs between the different versions of still and OS. Note where I can access my notes.

• (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  (blue screen) BUGCODE_USB_DRIVER with * STOP: 0X000000FE

  Hello
  I have Hp pavilion dm4 laptop computer with windows 7.
  Since last one I get a blue screen with error message over and over again. I've updated the BIOS and test HDD
  and tests of memory but not able to draw any conclusions.
  Please help me...

  Here is the error description...

  A problem has been detected and windows has been shut down to avoid damage
  on your computer.

  BUGCODE_USB_DRIVER

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is the new installation, ask your hardware manufacturer or software for windows updates you might need.

  If the following problem, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select advance startup options,
  then select Safe mode.

  Technical information:

  STOP: 0X000000FE (0 X 0000000000000008, 0 X 0000000000000006, 0 X 0000000000000005, 0
  XFFFFA800760A7A0)

  Thank you
  Mansi

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  about known issues with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =====================================================================

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  Error "STOP 0x000000FE" in Windows 7 or in Windows Server 2008 R2 when the computer enters
  or recovery mode sleep (S3) or from hibernation (S4)
  http://support.Microsoft.com/kb/974410

  Those 4 other KB Articles are available (from the date of this reply)
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000FE&SPID=14019&catalog=LCID%3D1033&RES=10

  ============================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  You can solve these yourself using BlueScreenView, MyEventViewer and other methods
  in this thread. Don't forget to use MyEventViewer to check at the time of the BSOD or less than a second
  in front of them to see if something is useful in the event viewer. Top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  Is it a Windows 7 upgrade installation or Windows 7 comes on the factory system?

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Media Player does not. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. »

  Original title: Windows Media Player does not

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I have Windows XP Professional and have tried playing the CD through Windows Media Player. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. "Then I do. Nothing here helps me. The player shows all my music but puts little red x showing that he can't play. Help! I downloaded version 11 of Windows Media Player, but it is saying the same thing.

  Thank you.

  Hello

  1. don't you also get an error with the message code?
  2 have you installed third-party readers part?
  3. What is the format of the files you are trying to play?

  Follow these steps and check if they help.

  Step 1:

  I would have you readers of third party temporarily Uninstall and check if persists it to the question.

  Step 2:

  Most likely you need codecs to play these files with Windows Media Player. I suggest looking up codec in the Internet that supports the file format, download and install them.

  See also:

  Player Windows Media for Windows XP supported Codecs

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See also:

  Windows Media Player Error Message help

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Why am I not able to choose a wireless network? I get the message "windows cannot configure this wireless connection".

  Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".

  When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.

  How can I solve this problem.

  original title: 1394 connection?

  Hi ToddHenderson,

  You did changes to the computer before the show?

  Method 1
  I suggest you try the following steps:

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  
  Use Windows to configure wireless settings
  a. go to the start menu, then select run
  b. type ncpa.cpl, and then click OK to open the menu of the network connections
  c. Select your Wi - Fi connection service and choose the option change settings of this connection.
  d. go to the wireless networks tab and check use Windows to configure my wireless network

  
  Launch Windows Zero Configuration
  e. return to the start menu and select run
  f. type % SystemRoot%\system32\services.msc/s, and then click OK
  g. double-click the Wireless Auto Configuration option
  h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
  i. Accordingly, click Start in the Service status section click OK to apply the changes.

  Method 2
  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I get the message Windows Media Player: "windows media Player cannot find the file.

  I get the message Windows Media Player: "windows media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. To solve the problem, try to fix the link or delete the library item. "When I try to record several songs. I can play the songs so I don't know what link is broken. The problem started after I tried to play a CD using Nero Essentials. I have since uninstalled Nero from my computer but I still have the error message and can not burn a CD.

  Hello

  Step 1: Change the media files are automatically added to the library when played.

  (a) click the arrow below the Library tab, click More Options, and then click the Player tab.

  (b) to prevent media files on your computer or the Internet to be added to your library when you play, delete media files add to library when played check box.

  Step 2: Also rebuild the database of windows media player.

  Follow the steps in http://support.microsoft.com/kb/925718

  See also http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5260&id=C00D10BA&contextid=89&originalid=C00D10BA

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.