Getting started with planning

Similar Questions

• Registration and getting started with the INK HP INSTANT

  Registration and getting started with ink HP Instant

  Note: your printer must be connected to the Internet via a wireless connection.

  How does that you will always have ink HP? Your printer uses Internet to let us know when to send more ink. Here's how you can get all the ink you need, delivered to your door.

  1. Buy an eligible printer.
      
  2. Enroll in a plan based on the number of pages you print.
     Ink, cartridge recycling and transport are included.
     No annual fee, change or cancel your plan anytime.3
  3. We'll will ship special HP Instant cartridges.
     Our cartridges have more ink than the standard HP ink cartridges, so you'll replace them less often.
  4. Billing service and begin after inserting your first instant HP ink cartridge.
      
  5. Your printer will tell us when to send handwritten entry.
     Your service is not based on how many cartridges you use, so print as many pictures of high quality that you want.

  • You will always have ink before you need it.
     
    

  LoneStarBob wrote:

  I received my first ink (three colors) of HP cartridge. check the two original instant of ink in the printer cartridges they show two 3/4 full (identical). Puzzeld just why black not sent.

  Hi LoneStarBob,

  I'm going to private msg you on it to help track.

  Thank you

  Ciara

• Firefox 8.01 - automatically load the "Getting started with Mozilla... page.

  Firefox 8.01 - whenever I starts, it loads automatically the "Getting started with Mozilla...» "the my home page Tab. How can't we open the tab "Getting started...". » ?

  Hi ricklord303,

  You should take a look at the Knowledge Base How to set the home pagearticle.

  There are the steps in this article to reset your preferences on the default home page. I would try everything first to clear all strangeness. If it works, you can try to set your homepage again to your personal preferences.

  If this does not work you should look at this article on this specific issue and Preferences not savedarticle.

  Hope this helps!

• The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  If the above did not help, then also see the following articles for more suggestions:

  • https://support.Mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • http://KB.mozillazine.org/Preferences_not_saved

• How to stop the tab 'Getting started with Mozilla Firefox' to open every time I open FF?

  Everytime I open FF, the tab "Getting started with Mozilla Firefox" opens. I checked and it is not in my list of homepage.

  If I open any additional windows, it does not open.

  But, once I close all the and reopen it again, the tab opens.

  I had a similar problem with some addons (ietab) do the same thing.

  I found the fix for it.

  About: config, filter for 'Start '

  Ones you want to should appear at the bottom.

  Startup.homepage_override_url and startup.homepage_welcome_url

  Double-click on each one and delete the text string. Close and reopen the window to check that it worked.

  As I deleted them both at the same time, I'm not sure who was the culprit. So, I suggest starting by striking first and tests before deleting this one.

• Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  This has happened

  Each time Firefox opened

  == I have this computer.

  You are welcome

• Try to download "Getting Started with Windows 8"

  Try to download "Getting Started with Windows 8" on the new computer. He has been loading for more than an hour with no results? How can I stop the page to load?

  Hi Carol,.

  I understand you are trying to install app "Getting Started with Windows 8" HP store and your computer and it failed to load and freezes the computer. If I'm wrong, please let me know.

  We will try to kill the application from the taskbar. Refer to this step.
  
  a. right click on the taskbar, click Start Task Manager, click the Applications tab, right-click on the application and click on end task.

  b. now, go to the Windows store and try to install the application.

  You can also restart the computer and check.

  Hope this helps and let us know if you need help.

• Get started with Oracle ADF DI 12 c tutorial does no not for me

  Hello

  Apart from a few differences with the screenshots I was not able to get the tutorial Oracle JDeveloper 12 c (12.1.3) tutorials - Getting Started with ADF Desktop Integration running.

  I'm not able to find information online on the error message I get at the end of part 2, when am I supposed to run the EditTable_LOV.jspx application for the first time:

  Error: < J2EE > < BEA-160187 > < weblogic.appc failed compile the application. Recompile with the option - verbose for more details on this issue. >

  Is it possible to understand what is the real issue or the tutorial work well for 12 c?

  Thank you.

  Fede.

  I went to libraries and ClassPath section under the project properties and go to the Java SE 1.7.0_51 (one I already had in my system) and now I have the operation of the application.

  Change the version of Java is the answer. Thank you!

  Fede.

• I'm just getting started with adobe creative cloud. I hace low loaded Media Encoder CC 2015 as well as first Pro CC 2015, but when every time I select apps in the app it says "download error please aontact costomer support". I tried to slow down

  I'm just getting started with adobe creative cloud. I hace low loaded Media Encoder CC 2015 as well as first Pro CC 2015, but when every time I select apps in the app it says "download error please aontact costomer support". I tried to reinstall the creative cloud by using the link provided and I also tried manually. I have Windows 7 with a 64 bit system.

  Hello

  I think that you have found the "download error" in the Apps Panel.

  Please check the help below document:

  Download error in the applications tab of Creative Cloud Desktop Application

  You can also view the threads below:

  https://forums.Adobe.com/thread/1832357

  Persistent Cloud error - error download - creative

  Re: Creative Cloud "Download error" message

  Kind regards

  Sheena

• Having problems downloading/getting started with Photoshop

  Just bought the membership. Having problems download/getting started with Photoshop. Try once then maybe interfering. When I go into Photoshop, it says it has expired! Don't see how I can remedy this.

  Hello Sharon,

  In addition you can also consult the help below document:

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• Getting started with VMWARE

  Hello, I'm just getting started with VMWARE. I downloaded VMWARE server I would ask what book would be a good book to start? I'm looking for something that will tell me how to install and configure VMWARE server for a beinger. Thoughts?

  Welcome to the Forums!

  You can find lots of good information on vmware server on vmware website located here:

  http://www.VMware.com/support/pubs/server_pubs.html

  This is the ' book online' real provided by vmware:

  http://pubs.VMware.com/Server1/wwhelp/wwhimpl/js/html/wwhelp.htm

  You'll find everything you need to know with the basic.  There are a few books out there, but they are not up-to-date regarding new versions of Vmware Server.  Most users always seem to use Workstation or "free ESXi.  You get free ESXi 60 days fully unlocked and I use it in my lab at home virtualized on vmware workstation.  I think you could do the same with vmware server, but never did.

  The only good book I could find was this:

  http://www.Amazon.com/Professional-VMware-Server-Programmer/DP/0470079886/ref=pd_sim_b_1# _

  I hope this helps and happy virtualization.

  See you soon,.

  Chad King

  VCP-410. Server +.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Getting started with the api perl?

  Hello

  I'm after a pointer or two in the right direction to start with the perl api for vmware - I have read around and ended up do not know on what api should I use. The ESX environment is v2.5.

  My requirement is to collect performance data of the computer (cpu/mem/disk/net) virtual guests and some configuration data (disk to lun map/mem & cpu allocations etc.).  I say this only in case it affects the choice of the API.

  I've also seen some docs/examples of scripts that mention a list of attributes that can come from the guest - these come completely out somewhere just in case I need more later?

  I've seen talk about vSphere cli for perl 4.0 (sounds weird like perl 5.x now), also version 1.5 and 1.6 of the perl api.  VIX too.  I guess that vmware have changed the names that they develop products, but since I was at the VC 2.5 I know of course at what point in the cycle of life, I should be in.  If there is a readme file that explains this lot just let me know.

  Thanks in advance.

  First of all, definitely take a look at this page: http://communities.vmware.com/community/developer/forums/vsphere_sdk_perl in the section of the resources on the right.

  It is a large document showing you the details of how the perl Toolbox not Accon vSphere SDK for Perl, really worth to go through the documentation:

  http://www.VMware.com/support/developer/viperltoolkit/doc/perl_toolkit_appliance_idx.html

  If you are familiar with the esxcfg-* commands, whereas you'll notice through the vCLI/RCLI, which uses the vSphere SDK for Perl has the same exact command set but the installer to help make managing remote:

  http://Engr.UCSB.edu/~duonglt/VMware/#vmware_rcli

  http://Engr.UCSB.edu/~duonglt/VMware/#vmware_vcli

  There are additional utilities that come with the vCLI/RCLI, take a look here for list:

  http://Engr.UCSB.edu/~duonglt/VMware/#vmware_viptk

  As you know, these are all Perl scripts, which means that you can open them and see how it is implemented and how they use the vSphere API, the reference for the API doc is also very important as:

  vSphere 4.0 - http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/index.html

  VI 3.5 - http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/index.html

  I think the best way to learn it is to start playing with some of the scripts canned and to make it even easier to have an environment that is all set up for you with the vCLI and vSphere SDK for Perl, you can download the vMA that is a management assistant from VMware to remotely manage your systems (i) ESX and vCenter.

  The version of Perl that is used is in fact 1.6 but the designation of vCLI is 4.0 which is in conjunction with release of vSphere 4.0, it has nothing to do with the version of Perl (Yes the naming/numbering really sucks and confuses a lot of people)

  Here is a nice document that made the breaking of all the various API/SDK/etc.: Getting Started with vSphere SDK - Update for SDK 4.1 release

  VIX is the main for the management of comments, it is intended to be used or can be used in conjunction with the vSphere API and you can find more information on the VIX.

  Also, here is a code example for vSphere SDK for Perl: http://communities.vmware.com/community/developer/codecentral/vsphere_perl and vGhetto scripts repository

  Well, I'm sure it is a handful of information and it will take some time to digest, but still the best way to learn is to start playing with it and you'll get a kick for him.

  Good luck and happy to script

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Getting started with VMware ESXi

  Please forgive me, because I'm just getting started with virtualization in the data center (ESX and ESXi). I been using virtualization desktop and server (player and GSX Server and Workstation) for several years now and I'd like to see if ESXi would be a good choice for an amateur system in order to use a training platform.

  Are my limited infrastructure management tools, or are there third-party or community free equivalents that will make the most much (not necessarily all) Infrastructure functions for me getting started with ESXi? I can't afford the cost of a license of Infrastructure to learn just the platform and also have a few questions regarding the ESXi environment.

  ESXi abstract everything, or I can pass through some devices (for example, a map of Zaptel for VoIP Asterisk) to a guest operating system? That would be my only reason for the use of a Linux host and stick with VMware Server instead of going completely virtual.

  Any assistance to the start-up, as well as good resources for someone new data center virtualization (no virtualization in general) would be very appreciated. I tried to read some briefs VMware tech directly, and a part of the documentation can be downright confusing.

  Thanks in advance, and I look forward to the next meeting.

  ESX are equipped with a fully functioing 60 days trial license - ESXi when correctly entered, you will receive an unexpiring licenses to run ESXi - discover https://www.vmware.com/tryvmware/?p=esxi

• How to get started with Obj oriented AS3? (Flash help seems broken)

  OK, I won't be the noob who does not read the manual and ask stupid questions, but I'm stuck here. It's been long since I had no experience real flash (Flash 5 in depth) and a small Flash 8. But now, my work has led me in some flash work & I'm basically from scratch. I am trying to get just a simple SWF to load an external class and have the class retrun value of a method.
  
  I define
  
  package
  {
  public class Greeter
  {
  public function sayHello (): String
  {
  var host: String;
  greeting = "Hello World!";
  return of the vows;
  }
  }
  }
  
  in an .as file (which is located in the same directory as my .fla) then frame 1 of my time line, I have:
  
  var myGreeter:Greeter = new Greeter();
  mainText.text = myGreeter.sayHello("Bob");
  
  When I try and test the movie I get 2 errors:
  
  1046: type was not found or is not a constant of compilation: Greeter.

  Quote:
  Posted by: newsgroup user
  I get only one, which is the "Incorrect number of arguments. EXPECTED
  no more 0,' and the reason for this is that the sayHello() method
  is not configured to receive all parameters.

  Under most of the cases I would have been skeptical of the passage of an argument when nothing is defined, but I thought I had heard (way back to AS 2) AS being based on some sort of JavaScript rules so I thought maybe that didn't matter. And unfortunately, this error was not my fault for typing, its actually printed this way in the Flash help (see: getting started with ActionScript > example: creating a basic application).

  We appreciate that clarification, even if I didn't get the error you mentioned. The compiler has never had that long before he released on bail.

  Quote:
  Posted by: kglad
  2. you must register the Greeter Greeter.as class file

  OK, this has proved be the problem... Just on a hunch, I decided to look into the matter. Save the file as [greeter.as/i] errors but off [ Greeter.as/i] does not work. Flash is really sensitive with regard to file names? In any case, I'm a little better. Thank you very much.

• How to get started with vmware in the SMB

  Hello world

  I read through this forum to help me understand more about vmware. I think that I have only a very basic understanding of vmware, so ask your recommendations for the project, I'm about to start.

  We are a company SMB with 3 offices in 3 places. We are about to implement a new software which runs on separate SQL 2005 servers in all 3 offices.

  I intend to provide all 3 offices with a similar configuration and have the servers SQL replicated during the night.

  The necessary servers are SQL server, file server and license server.

  The material I've been watching is DELL R710 or PE2950III PE. The number of people using the software would be about 5 to 6 for each office.

  Now, my goal is to move finally all our servers in a virtual machine, but to keep it simple for now, let me just start with what it takes for my project.

  My plan is to buy 1 server for each office and make them run 2 VMs each (SQL, Server license). With respect to the file server, I could use the local storage of the physical server.

  I am aware that this configuration will give me any redundancy in the case of a material error in the physical machine, but I'm hoping to expand my setup with the budget for the next fiscal year and buy the redundant servers.

  So I'm trying to get to the top and now works with spending too much on the material, but I still want to be able to move to a business solution from vmware that allows me to move VM is 1 physical machine to another, etc..

  I wonder now, what software to use for my project. I've been mainly reading on ESX and ESXi. I was looking at the license to the Foundation, but not sure that ESXi makes much sense at all if I have my VMs on 1 physical computer only.

  Then the VMware Server would be a better solution for me? If I decide to VMWare Server, can I still upgrade ESXi later?

  If I go with ESXi, I understand that I can have embedded it or installed. I guess that I can't use the local file storage when using the embedded version of ESXi?

  If I install ESXi, however, I have to start in Win Server 2003 or 2008 first that requires a separate license again and then install ESXi on its own partition on a Raid1 array. I would then use a Raid 5 for all virtual machines.

  Also with ESXi, would I be able to upgrade to a later version of ESXi with my setup? I guess that all the virtual machines must be stopped for an upgrade to ESXi?

  Appreciate any advice.

  See you soon

  Yes, this seems a sensible approach. As you are new to do this of course, you understand the different options of ESX here because it can be a little confusing to start. Going with Vmware server path would be much more disruptive in the future that you will suffer more downtime to make the change. Just to be clear, VMware Server is one where we have an application that runs on Windows (or Linux) to provide the functionality of virtualization. ESX or otherwise runs directly on the hardware.

  ESXi free edition, this may be an option for you initially, but you can not manage it with vCenter. You must use the VI Client directly to each box, failed to get the enterprise as vmotion etc features. With a single server, initially, this could be a good starting point.

  With paid for ESX you will have many other options, note the ESX layer features are essentially the same although we allow them just allows you to add the other stuff by taking the commercial offer.

  At this point it is assumed that you have vCenter somehow, so you will need a Windows Server to the host which can be a virtual machine if you want. If you started with the edition free is simply a matter of connection of the device of vCenter for ESXi nodes and they get activated with the management features - no downtime is necessary.

  Then you have 2 choices for ESXi

  (1) install on HDD or USB

  (2) buy what it come pre-installed with your server.

  The question is then what edition you purchase. We have some packages SMB has been called Essentials or Essentials more, but they are limited to a maximum of three servers altogether, it would be ok for you in you're first scenario but if you then want to make each site two nodes, so you'd not nowhere to go, a nd currently is not a licensing mechanism to upgrade , that's why I suggest you seriously consider 'Standard '.