GigE Directshow or bus ethernet type Max camera

Similar Questions

• How can I get a list of all IEEE 1394 defined in MAX cameras?

  I can use the DAQmx_System:Global_Channels property node to get all global DAQ channels defined in MAX, but is it possible to do something similar to get all the names of camera?  I am after all especially the IEEE-1394 cameras, but would be happy with a list of all the cameras to begin with.  Is there a property node that I'm over looking?

  Hi, Christopfer,

  You can use IMAQdx list Cameras.vi for a list of all the cameras. (of course, here I assumed that IMAQdx used to connect to the IEEE-1394 camera).

  Another way is utility CameraValidator.exe with key/enum - this will also list the available cameras.

  Best regards

  Andrey.

• Error 'the database of the Max came out abnormally' in 2010

  The 2010 version installed and ran the MAX 4.7, it gave me this error. It worked fine when I used version 2009 & MAX 4.6. Does anyone have the same problem? I start the Configuration Manager of NOR, but it still doesn't work. I re-install DAQmx 9.2, however, it still does not - always gives me the same error. Can anyone help?
  

  I have corrected the problem. I downloaded the exe of the MAX database corruption to clear the database. After this, I restarted the computer, it worked. I'm running a few VI to the test and it seems to work very well.

• The CAN bus activity: why can I not see my CAN bus activity using MAX and a NI USB-8473?

  I use an NI USB-8473 and Measurement & Automation Explorer on a CAN bus I know works.   He does not see as a traffic CAN bus.

  Any ideas on how to trouble shoot to find out why this material does detect any signals at all?

  DOH!

  We've all been there.  I'm glad you have work.

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• Prosilica GigE GC750C Camera do not acquire images using software of NOR

  We recently had a camera Prosilica GigE to GC750C. After activating the camera, Jumbo packets is recognized and acquires images with the help of allies Sample Viewer. The camera is also recognized by the NI Vision Assistand and MAX. But trying to acquire images results in the error message attached. I would be very grateful for any help.

  Best regards

  Benjamin

  Operating system: Windows 7, 64 bit

  Firewall disabled; Jumbo packets enabled

  Allied Sample Viewer 1.24

  NEITHER Vision Assistant 2010 (build 20100621052956)

  OR Max 4.7.2

  Benjamin UB says:

  Thank you much for multiple responses.

  The AVT UniCam Version 1.1.3.0 allies and Allied SampleViewer Version 1.24 buy images correctly. This is why I can't imagine that a firewall might be interfering. Also affecting the packet size to 1500 Max only has not solved the problem. Any other ideas?

  Hi Benjamin,

  If you use a software firewall, there are actually quite a few reasons that a piece of software can acquire, but the other may not. Software can set different layers to the network stack and the behavior can be very different. In my view, both software places AVT can reach are either user-mode (in which case the firewall software can easily be configured based by application to let traffic through) or as a network filter driver based on the core (which lies below the firewall, so it is not affected by the latter). If IMAQdx, two locations, it can attach to the network stack are either in kernel mode talk to the TCP/IP stack (above the firewall) or as a driver miniport directly above the hardware and below the firewall (if you have an NI GigE Vision card or one that is compatible with the Driver OR High Performance).

  New versions of the GigE Vision standard has a new feature that make the Protocol more 'user-friendly' firewalls. Our next version of IMAQdx (which I think should be on the web every day now) has support for this new feature. We tested the new AVT cameras and it is supported as well. This should be the firewall issues such less problems.

  Eric

  Eric

• Let fall speed when starting to save the AVI with camera basler GigE

  Hi all

  I use 2 cameras GigE of Ace basler at 60 frames per second to capture of animal locomotion. I randomly experience this kind of problem. When I start to save in a start/stop button and save videos in the HDD sometimes lower at 20-14 fps frame rate and a framework to skip 2 or 3. After that, the pace has become stable at 60 frames per second.

  Here are the parameters and specifications of the overall program:

  -J' use a loop of producer/consumer (I've ever known a fill of the queue even when the rate of drop occur)

  -J' fixed bandwidth of the card Intel GigE from 100 to 500 for each camera

  -sent packet size = 8000

  -firewall disabled

  -execution of vi in higher mode

  I observed that the dropping of the pace occur when the vi run for a while without interaction with the operator (the operator configure other settings in another computer, so the vi only acquire the video without saving)

  I have attached the vi

  Thank you for your help

  Alex

  Hi Eric and Isaac

  Finally, the problem was similar to that indicated by Peter Westwood in his post 'lost GigE frames/buffers '. I discovered that the problem occur with the version of labview 2012. Indeed, I tried with the 2011 version and I have it all fall. So, I'm doing the same thing that Peter is "I changed the program, so that keeps an account number of buffer (incrementing the number of buffer on each bucket) and specifies the number of buffer to the VI Grab." "It works well, even on the occasions when the loop of the acquisition is sometimes momentarily delayed for up to a second or more, i suspect, Windows to write the contents of the disk the disk buffer, or do some other household.

  So even if the fps drop the program acquire the right frame and in the video I do not see any image ignored

  Best regards

  Alex

• If I have a page on the computer and to open another page it starts outsmall and I have to type a Max to come to full page why?

  When I have a page up and to open another page it will appear to half way and I have to type max sign so he could see the full page.

  Hi AngeliaNovel,

  · With what application this behavior is displayed there?

  To work around this problem, try the steps:

  a. open the window you want to open in maximized and close by pressing the cross of the window button.

  The next time you open the window, it would open an enlarged page.

• How to connect an IP camera to cRIO-9025?

  Hello

  I have a cRIO 9025 with two ethernet ports. I want to connect an IP camera for the cRIO to capture images at regular intervals. I followed the procedure mentioned in this post: http://zone.ni.com/devzone/cda/tut/p/id/10867, MAX, but still cannot detect the camera. I downloaded the drivers mentioned in the above page. Could someone please suggest a solution?

  Thank you.

  Hi Pranjal,

  Acquisition of images on a cRIO is very limited right now. The only supported RIO acquisition is of IP cameras by Basler and axis. These cameras use the IMAQdx pilot. Take a look at this linkand look under the section Fast Ethernet (IP) for more precision. Since you are using a Panasonic camera, the driver doesn't know how to recognize.

  In addition, with the right type of camera, IMAQdx drivers must be installed on the host computer and the cRIO to properly set up the acquisition of images. Take a look here for details on the appropriate measures to implement. I would like to know if I can help with anything else.

  Best regards

  Sahil Singla

  Sales engineer | National Instruments

• Windows xp automatic camera detection

  Hey,.
  I have an Olympus Stylus Tough-3000 digital camera and Windows XP Professional. It works on my Windows 7 computer, but when I plug it to my XP computer, all I hear is the sound, and then get a box that says 'choose what program to use with your device.' There is not in the list, so I downloaded Picasa 3, but it won't work. And when I go to scanners and cameras then plug my camera, my camera icon appears briefly and then disappears. Help, please!

  Maybe something in the following collection of suggestions (already posted
  in the MS newsgroups) will shed light.

  Before that you connect your device to your computer, make sure that you have enough
  battery power or better yet use your AC connector if your camera came with
  one. Then check the manual of your camera.  With most cameras, you put simply
  on and set to take pictures with others, you need to put in
  something like connect to the PC or define the PTP. After the connection, power of the camera
  and wait about 15 to 20 seconds for XP to recognize the camera, you will hear
  some his "Ding Dong" and the LCD screen of your camera will change (the
  change is dependent on the type of camera you have) and you are now ready to
  transfer, even if the AutoPlay window does not open automatically.  If you
  do not hear a sound or the LCD screen of your camera does not change, the
  the USB connection is not correct. Go to the bottom of these
  directions to repair the USB connection.

   
  After hearing the sound:
   
  1. open my computer, look under devices with removable storage. Your camera
  (or card reader) appears as an external drive (probably listed
  below of your CD-ROM drive). Right-click on your camera listed as an external
  drive. A menu opens, click on AutoPlay listed in the opening menu. This
  should open the AutoPlay window to download your photos the same way as when
  the AutoPlay window opens automatically when you connect your camera.
   
  Or
   
  2. open my computer, look under devices with removable storage. Your camera
  appears as an external drive (probably listed below your CD
  by car). Double-click it to open it.
  You will see a folder, double-click it to open it, and then another folder, double
  click it to open it and you will see the list of photo files. Select all
  the files and copy them to a folder on your hard drive. To select all files, press and hold the
  Hold CTRL key and press the letter A. Or, click on edit on your top bar and
  then click Select all in the opening menu. When the files are selected, their
  the names are highlighted in blue.   You can then see the menu on the left
  file names and click on copy, then select the folder you want or
  Create a new folder.

  If you want to repair the automatic AutoPlay window you can try the
  Next.

  Different ways of trying to fix the window of Autorun for download from
  camera or card reader. Also, the same procedure can be used for a CD
  drive AutoPlay.

  Go I-V steps, although V step may not be necessary.

  I. connect your camera (or a card reader) to your computer and make sure that you
  have pictures on your memory card. Make sure that your batteries are equal to or greater
  again, use your power adapter if your camera came with a. If you try
  just connect with a card reader, with an inserted memory card and
  photos on the memory card. Turn on the device, wait 10 to 15 seconds for XP
  to recognize, you should hear a sound and the LCD screen of your camera
  will change, change is dependent on the type of camera you have.

  Click on my computer and look under the device with removable storage. Your

  
  camera appears, probably under your CD player and a player
  letter will be assigned to it (something like the H, G, etc.). You will use this
  The drive letter in a step below, so just note it on what the drive letter is.
  If you don't see your camera listed there, you'll need to fix your USB
  connection (see below for repair), or you are on a network and the network
  Player is Z and XP cannot assign a drive letter to your camera. You will need
  take care of that first. The following steps will not work if XP cannot be attributed
  a drive letter for your camera. In some cases, your camera may be listed
  but no drive letter. Try the drive letter after the CD or DVD drive
  registered at the camera.

  II. Click Start, click Run, and type the following command in the text box:
  REGSVR32 SHIMGVW. DLL
  and press enter
  Note that there is a space between... 32 and SHI...
  This will take a few seconds to run.

  III. download the file autofix.exe site below.  At this Microsoft
  site, you have the possibility to download the autofix.exe file in one of your
  folder (or create a new folder, and then save the file it), then open the folder
  Double-click the file, and then follow the instructions on the screen. Or,
  Let Microsoft scan your computer for repair. You will need your
  drive letter of camera during this step.  After that, restart your computer.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad&displaylang=en

   
  IV. after reboot, power on, wait 10 to 15 seconds for XP
  recognize it, you should hear a beep and the AutoPlay window
  should now open giving you the opportunity to download pictures from the camera.

  V. you may need to set the options in this window.
  Click on my computer, your camera must be registered the peripheral with slot
  Removable storage. Right-click on it and click Properties. When opening
  window, click the AutoPlay tab, under Select, highlight the pictures to
  Select it. Select the warn me...  Do the same thing for a CD player.

   
  Another solution posted by Bill, using a Nikon camera.

  I installed the camera through the Control Panel Add Hardware feature. He went
  point of requiring a file called ptspusd.dll from the service pack, a. I have
  found the file via search on my hard drive. Type the path in the window
  who asked for her and she had. Solved the problem. See Configure your menu on
  the camera to see your USB setting is PTP

   
  To repair your USB connection:

  Go to control panel > performance and maintenance > system > hardware > device
  Manager > Universal Serial Bus Controller, click the plus sign + to see the list
  arrangements in place. If your device is connected, it must be registered with
  with a yellow flag (the yellow flag indicates that although the connection)
  is there, it does not correctly).

  Make a right click on it > properties > troubleshooting. See if the convenience store can
  Help. If this is not the case, click Action in the top bar, and then click Uninstall. Let your
  camera on and connected and reboot. XP should now recognize the camera and
  install it (I assume here that your camera is fully compatible with XP
  and according to your manual, you don't need to install a driver, that
  must be true for the cameras of 2001 and more).

   
  Also, make sure the software you use for photo editing. When you open the
  software, click file in the upper bar. Consult the opening menu. You
  probably have an option to download photos from a camera or a scanner or
  card reader.
   
  Something else could be the problem (this is a more recent, June 2004,
  
  problem) as shown here:

  All of a sudden there are not a lot of posts here on the camera wizard
  work. Same thing for me after work for at least a year. An of the
  messages mentioned the upgrade to Real Player seems to cause the problem. I have
  recently updated that also. Just uninstall my camera assistant and it came
  immediate return - this after weeks of trying to figure out what went wrong!
  --
  Brigit

   
  (Note: some have reported that uninstalling Real Player 10 works fine,)
  others have reported that they had to use the autofix.exe after removing
  Real Player 10. Real Player is aware of the problem and working on a fix).
  Apparently, he had no problem with Real Player 9.

  Another possible solution.

  Click Start, click Run, and type the following command in the open text box:

  cmd

  Press the Enter key

  A window opens (black and white) and displays the following text:

  C:\Documents and Settings\Votre name Name\

  Type the following at the end of the above line after the.

  Net start stisvc

  Press the Enter key

  You will receive a message that service is already started (if if it does not work)
  solve the problem) or it starts (if if it can solve the)
  problem). Then try to connect to your camera after you close this window. TO

  
  Close this window, type EXIT at the end of the displayed line and press on the
  Enter the key.

  More information, posted in the discussion Forum:

  IT SOLVED! Open Tweak UI if you. Get it if you
  Do not. In Tweak UI, open the tab/line of work stations and
  Click on readers. A list of all possible drive names will be
  appear with those that you want to display in my computer
  checked. If your storage removable/generic/camera volume
  drive as reported in Device Manager (mine was F :) is not)
  turned on, turn it on. The drive appears in my computer.
  If your drive is already checked, is something else.

  Tweak UI can be downloaded from the following site:

  Windows XP PowerToys.
  Free download
  http://www.Microsoft.com/windowsxp/downloads/PowerToys/xppowertoys.mspx

• Using the query - amount weekly, daily, max & time

  Hi guys,.
  
  I came looking for help with this query, I should use to create a new table. At first I just thought I needed to store the weekly amount and some other information, but then told me that I need the sum for the week and the hourly figure higher this week with time. I managed to make all columns except rush hour causing me issues.
  
  The DESC table is as follows: http://i38.tinypic.com/8yt0.png
  
  My query result has need of the following:
  Db_name (direct copy of the table)
  TYPE (direct copy of the table)
  YEAR (cropped from TD_HR - first 4 characters)
  WEEK (cropped from TD_HR and then converted to the IW format)
  TOTAL (weekly column TOTAL amount)
  HOURLY_PEAK (the largest AMOUNT for a given time during a week)
  PEAK_TIME (time of the highest sum for the week)
  
  I have everything show except PEAK_TIME. Sample data:

  DB_NAME     TD_HR             TOTAL   TYPE
  CSAHEPA     2008-07-24 16     35     CON
  CSAHEPA     2008-07-24 15     4     CON
  CSAHEPA     2008-07-24 16     19     CON
  CSAHEPA     2008-07-24 17     3651     CON
  CSAHEPA     2008-07-24 16     7     CON
  CSAHEPA     2008-07-24 17     113     CON
  CSAHEPA     2008-07-24 17     534     CON
  CSAHEPA     2008-07-24 17     289     CON
  CSAHEPA     2008-07-24 17     12     CON
  CSAHEPA     2008-07-24 16     52     CON

  My current (terribly inefficient) query is the following:

  select DB_NAME, YEAR, WEEK, sum(SUM), TYPE, sum(WEEKLY_PEAK) from (
  select DB_NAME, SUBSTR(TD_HR, 1, 4) year, to_char(to_date(SUBSTR(TD_HR, 1, 10), 'RRRR-MM-DD'), 'IW') week, sum(TOTAL) sum, TYPE, 0 WEEKLY_PEAK
  from CORCON01_HOUR_CHG_TOTALS
  group by DB_NAME, SUBSTR(TD_HR, 1, 4), to_char(to_date(SUBSTR(TD_HR, 1, 10), 'RRRR-MM-DD'), 'IW'), TYPE
  union all
  select db_name, year, week, 0 sum, type, max(peak) weekly_peak from (
  select DB_NAME, SUBSTR(TD_HR, 1, 4) year, to_char(to_date(SUBSTR(TD_HR, 1, 10), 'RRRR-MM-DD'), 'IW') week, TYPE, sum(total) peak, CONCAT(INITCAP(TO_CHAR(TO_DATE(rpad(td_hr, 10),'yyyy-mm-dd'),'dy')), substr(td_hr,11))||':00' peak_time
  from CORCON01_HOUR_CHG_TOTALS
  group by DB_NAME, SUBSTR(TD_HR, 1, 4), to_char(to_date(SUBSTR(TD_HR, 1, 10), 'RRRR-MM-DD'), 'IW'), TYPE, CONCAT(INITCAP(TO_CHAR(TO_DATE(rpad(td_hr, 10),'yyyy-mm-dd'),'dy')), substr(td_hr,11)))
  group by db_name, year, week, type)
  group by db_name, year, week, type

  The final column data are given in the 2nd query here as:
  CONCAT (INITCAP (TO_CHAR (TO_DATE (rpad (td_hr, 10), "yyyy-mm-dd"), "dy")), substr(td_hr,11)) |': 0 0' peak_time
  Any help (get the last column included and/or improvement of the effectiveness of the query) is greatly appreciated.
  
  Mike

  This?

  with  results as (select db_name,
                           to_date(td_hr, 'yyyy-mm-dd hh24') td_hr,
                           total,
                           type
                    from   CORCON01_HOUR_CHG_TOTALS),
  final_results as (select db_name,
                           td_hr,
                           type,
                           sum(total) sum_total
                    from   results
                    group by db_name,
                             td_hr,
                             type)
  select db_name,
         to_char(td_hr, 'yyyy') year,
         to_char(td_hr, 'iw') week,
         type,
         sum(sum_total) week_sum_total,
         max(sum_total) peak_sum_total,
         to_char(max(td_hr) keep (dense_rank first order by sum_total desc), 'yyyy-mm-dd hh24') peak_hour
  from   final_results
  group by db_name,
           to_char(td_hr, 'yyyy'),
           to_char(td_hr, 'iw'),
           type;
  
  DB_NAME          YEAR WEEK TYPE       WEEK_SUM_TOTAL PEAK_SUM_TOTAL PEAK_HOUR
  ---------------- ---- ---- ---------- -------------- -------------- -------------
  CSAHEPA          2008 30   CON                  4716           4599 2008-07-24 17
  CSAHEPA          2008 39   CON                   611            555 2008-09-24 16
  

  (And why, oh why, you store your dates as VARCHAR2?) ({noformat} * sobs * {noformat})

• NOR-MAX noncontinuable exception

  Hi all

  See the attached screen shot. When I try to change the NOT-Max camera file, I get this "noncontinuable exception." The file in question worked last week, and in fact NEITHER-MAX won't let me change any camera file that should work with this camera.  The camera is an evaluation from a supplier of the probe card and the file .icd I'm moving them here - it is currently working with my file .icd updated the. For me, it's the strangest part: the equipment works, everything is speaking to each other, I just can't change the camera files.

  I tried to run OR-MAX as administrator, thinking business HE might have eliminated a change of permissions. When I run as administrator and select the new camera file, NOR MAX just goes down, no pop-up window and the file still does not change.

  Windows 7; OR MAX 14.5, LV 2014

  PCIe-1433 framegrabber

  I'll try to save a file in Camera File Generator. I'll post more information, if I learned something.

  Thank you!

  Crazy

  Installation LV2015 has indeed fixed the problem OR MAX. If a part of my previous installation has been corrupted. When I tried to repair the installation earlier today, I had not the installation media going TO practice (or I could have deleted the download like a fool), so I jumped this repair. Now it seems that the problem lies in him GOING somewhere.

  See you soon!

  Crazy

• IMAQdx Open Camera.vi very slow

  Hi all

  I use a firewire IEEE1394, a camera with IMAQdx with labview 2009.

  1. I have configured MAX camera and tested. It works very well.

  2 - I used the "Grab and attributes Setup.vi" Labview examples. With the vi, it takes about 1 second to find the camera and it works fine.

  3 - I copied the Camera.vi of the IMAQdx 'open' this example in my own software. When I run it takes about 20 to 30 seconds to open the camera. He finds it, but it is extremely slow.

  4. to test, I opened at the same time the 'IMAQdx open Camera.vi' 'Grab and Setup.vi attributes' and my request, set the name of the camera on the two clones and run one after the other: I still see the same behavior: the first (from step 2) takes 1 second to open the camera, while the other (from step 3) takes 30 seconds to open without sending an error message.

  I came to the conclusion that there must be a link somewhere to a file of configuration or something that makes the fastest start-up in one case than in the other.

  Has anyone experienced something similar? / Did someone has an idea on how to solve this problem?

  
  

• Camera USB IMAQdx low resolution-'for internet use"Option?

  Hello

  I have a USB camera compatible directshow. The resolution of the camera should be close to 2600 x 2000 (not sure on exact). When I see 'Available video Modes', the highest resolution is 352 x 288 resolution.

  The company that provides the camera told me to uncheck "for internet use" in the property of the Group of experts to help solve the problem of resolution.

  I don't see that option anywhere. I looked into the property node IMAQdx as well as for any "attribute of the internet."

  Any ideas on where this option is or how I can fix this low resolution?

  Thank you

  Tony

  The option 'Use Internet' apparently does not exist in LabVIEW (the less c. 2010).

  For the directshow driver, the seller of the camera (Motic) created a new registry file that I imported into the registry and cela solved the problem of resolution.

• Camera AXIS

  I'm trying to acess IP Axis 207MW network camera and I can't seem to understand how to communicate with the camera. I know it's possible because I saw a high school using this type of camera for FIRST Robotics. LabVIEW provided the files to do, I don't have these vi. Right now I use linux command called wget to get the picture from the IP address. However, it is very slow and delayed. Can someone explain to me how to better communicate with my camera? Thank you.

  -CRBreingan

  The attached VI is to record the stream for 5 seconds. In Windows XP, it works for me...