Gives my incorrect location

Similar Questions

• Color LaserJet Pro 200 M251nw incorrect location

  An incorrect location for the printer M251 will affect app availability, technical support options, and a few other things frustrating. The LCD touch screen is a little wonky on the first Setup, and we accidentally chose a different country of our desired first config entry. Applications available in the connected site hp corresponding to the location set in place on the printer.

  This is different from the language selection. Even if we had the correct language selected, the printer reported itself to be in a different country of actual usage.

  There is no parameter of the web page of the printer and not reset will eventually ask or allow you to change the code.

  Solution to be posted then.

  To solve this problem (and potentially other set incorrect configurations), it must first make a backup of the configuration of the printer. This is done through the web pages of the printer, on the System tab, and then save and restore in the left navigation pane.

  Once the file DeviceSave.xml is downloaded to your computer, open it in your text editor or XML editor. Attention, bad parameters in this file could cause problems with your printer configuration. Proceed with caution!

  In the final stanza, finding the

  Change to the

  enabled
  

  Just add the word licence between the tags. * NOTE * there should be no space between the dd: and the DeviceLocation. This editor to please to do an emoji on this combination and it looks like this ddeviceLocation. Probably best to do not copy / paste the above lines.

  Save and close the file. Back in the web pages of the device, on the backup/restore page, under load and restore the settings of the device, select the file comes to edit and click on the Load button. The printer should immediately ask the location of the country.

  Good luck. Calibrate the touch screen. Make a new backup.

• Firefox Mobile sync gives me "incorrect recovery key. Please try again. »

  It is a continuation of this issue, which has been closed without resolution:

  http://support.Mozilla.org/en-us/questions/931089

  I use a custom synchronization server and get the "incorrect recovery key. Please try again. "whenever I click on"Connect ". The synchronization log that exists in the desktop version of Firefox is not present in the mobile version, so I have no idea how debug this further on my own.

  OK, I think I thought about her. There is a disparity of the bug/feature in Firefox mobile compared to the desktop version.

  The mobile version will only accept the most modern "encoded friendly" AES key. However, desktop version will accept any old rope, you give him (which he then turns into a key using the magic).

  There is a way around it. If you have a desktop version of firefox, you can get the mass of the key of the synchronization version. Just set up sync with your password. Then go to Preferences-> Sync-> manage account-> my recovery key. There is a version of your key mobile Firefox will accept.

  Unfortunately, it is now crapping on another bug and refusing to accept the URL of the server. God this thing is buggy...

• Google Maps - Site has been created with correct map location, now displays an incorrect location?

  Hi all

  I don't know what is happening. I created a website for a client and used the Google Maps widget to add a map on the site.

  When it was created and downloaded first, everything was fine and in good working condition.

  The client sent now that on the site, Google maps shows another location, which is.

  Here is the website with the location of the maps incorrect page: Hours location

  Here is the map/Info which is supposed to be displayed: https://www.google.com/maps/place/Heddon+Museum/@41.9865694,-86.1157902, data/15z =! 4 m 2! 3 m 1! 1s0x0:0x9768c49fcde9e3a1

  I have also included a screen shot of the page open in Muse to show what it was created as originally published as:

  

  A few questions-

  1. how this change? I opened the last registered site which has been published and it has the location of the correct card (as shown in the screenshot above).

  2. How can I prevent this happening again? I'm sure that if I re - download it will fix it, but it's just a band-aid and I want a permanent solution to prevent it.

  Thanks in advance!

  Melissa

  Just figured it out with the help of the cat from Adobe:

  They had put me in the 'Museum of Heddon' name instead of the address, and it fixed the issue.

  They said that it captures the Google code, so most likely, what happened, that's what they (Google) changed/updated their code.

  A note on what I found: if I type the full address 'Museum Heddon Dowagiac MI 49107' it always goes to the wrong card location. By simply removing the postcode, it goes to the correct location. Not sure why she does that, I'll probably have to contact Google.

  If anyone has another preview comment below, I wanted to just that everyone knows how to solve this problem if they were also have.

  Thank you

  Melissa

• iPad IOS 9.3.4 (with GPS) air 2: using Skydemon (used for the flight) gives "Waiting for location data", as the error

  I use my iPad 2 a air application during the flight of an aircraft (Skydemon) for flight and my flight plan.

  Most of the time it works fine. Yesterday, I received an error "pending for location data. seems dat that GPS does not work correctly. I've recently implemented in the latest IOS update.

  Don't know

• Google on Firefox gets my incorrect location (Chrome and Edge are fine)

  Since the upgrade to Windows 10, I had some localization issues when using Firefox. When I search something in Google, I get only US results (we are located in the Canada). However, Chrome and Edge both show good Canadian results. I checked the location of my IP address and it shows Toronto (as it always has).

  It's only a problem since upgrade to Windows 10. When I was installing Windows 10, I know that I turned off location services because I don't trust Microsoft with any personal information. However, thinking that this might be the cause of my problems, I finally gave in and activated the service return. However, it has not fixed the problem.

  I tried to change the settings for Google Privacy policy by clicking on the padlock and setting the access location to 'allow' but which does not have something or the other.

  I am at a loss. Firefox has been my main browser for more than a decade, but it's a deal breaker. I am currently working on a SEO project and I need my search results as specific location.

  Many Canadian and British users report that Google redirects is more research that Firefox sends to google.com on the local country site. Is that what happens to you, you get results on google.com , instead of google.ca?

  I have yet to see no explanation for the change, or any miracle. What I suggest is to install a google.ca- specific search plugin and do as your default.

  For example, this page has four options of Google Canada:

  http://mycroftproject.com/Google-search-plugins.html

  During the installation, should be offered the opportunity to make the new default search plugin. You can try it for a while and see if you like the results and, if not, you can change your default by using the Options page search section:

  "3-bar" menu button (or tools) > Options > search

  Who help me?

• The firefox search using the google engine not give me option location more, how I get it back?

  I am running Firefox 4. The search bar is the google search engine and I used to get the location search options when I tried to use it! This is after I enter a search word and press return, I'd get results and on the left of the page I had the ability to change my pages of web location of my country or around the world. But now it's over. But when I go to google.com.sg, I am able to get it.

  Look here for the other Google search engines including google.com.sg:

  • http://mycroft.mozdev.org/quick/Google.html

• Location of the computer indicates an incorrect location

  I live in Kinston, N.C... My computer also shows Tyler, Texas as home location

  WeatherBug, mlb, see the weather for Texas... I get outages of Houston baseball

  games on mlb... I can change location, but... always comes down to Tyler

  * The split from: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/why-does-my-computer-think-im-in-a-different-city/aba96e7c-3480-4dfa-bc81-f89126fcef8f*.

  Hello

  1 make the location of the weather, area of origin and MLB reports not properly on a particular Web site?

  2. where exactly did you change the initial location on the regional settings of the control panel or the site?

  3 did you changes to the computer before the show?

  You can try to set the geographic location of your computer and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/set-a-geographic-location-for-your-computer

• getDuration() gives an incorrect value. bug?

  I have a simple symbol with a 10 second delay.

  If I place a any trigger like sym.stop () anywhere "in the timeline" sym.getDuration () gives me 10000 what ist correct.

  If I not put off action on the timeline sym.getDuration () gives me 170454.41228624 that is absolutely not correct.

  Its in the same EdgeAnimate - composition and clearly reproducible.

  The patch (EA 2014.1.1) with the fix is now online.

  Please upgarde your board animate to 2014.1.1

  Kind regards

  Vivekuma

  Edge Team Animate

• Parameter is incorrect compilation problem

  Hello

  I am really pulling my hair on it.  I have a flex using Flash Builder 4.5.1 project that uses the BlazeDS remoting services.

  I run my Flash Builder inside an Oracle VirtualBox VM (Windows XP) because I am a user of Ubuntu.  I was fortunately compilation and deployment for a couple of months without hassle.

  Recently I got a new laptop.  I have my VM has exported and imported on the new laptop.  All of a sudden my project when compiling gives me an error: 'the parameter is incorrect' location 'unknown '.

  If I create a simple project from scratch, it compiles very well without any problems.  I can then navigate to my service of BlazeDS, add it - but as soon as I am referring to this service in my component - the component compiles well but on the project level, it gives the above error.

  I've looked everywhere for a more detailed version of the error: but nothing.

  Help please!

  
  Rgds,

  Willem.

  So for those interested, I solved this problem by creating another vacuum of virtual Windows machine, reinstall Flash Builder and re-import my project.

  It seems that Adobe Flash Builder has built something obscure that dislikes you migrate a virtual computer to another host.  I did unregister and re - register my product between the virtual machine, incidentally - that does not work.

• Location of the computer has changed with the HDD Upgrade

  I live just outside OR Belfast. I just upgraded my HARD for one SSD drive. My computer is an iMac late 2009.

  I had a lot of alerts on my iPhone while allowing this new record, since it is considered as opening session on a new computer, which is perfectly fine. But authorities said that the location of my iMac is now in MANCHESTER, England (including the alert when I logged on my Apple account to ask this question)! Should I worry?

  I'm fighting to understand this. When I go in the Date and time preferences it gives my correct location. Local Apple authorized company to upgrade my HARD drive order in the SSD, probably from Manchester, is there something integral to the SSD which gives a Manchester location? If so, is it possible I can reset?

  Thank you

  Location Services uses the location of the router is using your Mac. The Mac itself has no possibility to determine its location. Extract from on location Services in OS X and Safari - Apple Support:

  Your approximate location is determined using information from local Wi - Fi networks...

  The iMac may contains a location cached to a bygone era - that of FSAA install the SSD. Time zone of your Mac (in system preferences > Date & time > time zone) is based on the extensive location of the IP address of your router and can simply choose the closest major city.

  If so, is it possible I can reset?

  Perhaps. Open system preferences > privacy and security > protection of personal information. Authenticate, then deselect Enable the location Services. Select again.

  If this does not work, try cycling the power on your router.

  If it still does not work, give it a day or more resets automatically.

• Location of the copy in Photos

  Is it possible to copy the location from one photo to another in Photos as we could in iPhoto?

  My iPhone picks up the location but my Sony camera does not work.  In the past, with iPhoto, I could copy the location of a photo with the location of a photograph (taken in the same place) who did not have the location information.  I thought the Photos were supposed to be updated to allow to add/copy the location.

  Using OS X El Capitan version 10.11.5 on an iMac

  Thanks for any help you can offer.

  Hi debby0514,

  If when you import photos from your camera Sony to the Photos app and the location data is not displayed or incorrect, the best way to solve this problem would be to manually add the location for the pictures once it's in the Photos app. You can do so by following the steps below.

  1. Select a badly located photo.
  2. choose Image > location > location to remove the menu bar.
  3. press on command-I to display the info of the image.
  4. at the bottom of the information window, click on location.
  5. start to type an address, city, company, or other name of the location. When you type, AutoComplete suggestions will appear. Select the location you want to assign to the image.
  6. repeat these steps for any image which has an incorrect location.

  Difficulty of the incorrect locations in Photos

  You can do this with several photos at the same time. Press on and hold down the SHIFT key, and then select the first photo you want to apply changes to. From there, click the last picture you want to assign to the same place for. Release the SHIFT key and then right-click on one of the images highlighted. Select "Get Info" and follow the steps above to enter the site. This will apply to this location for each image that you highlighted.

  This should get the desired location on your photos without delay. Thank you for using communities of Apple Support.

  Have a great day.

• How to add location α all photos in an album?

  How can I add a location α pictures in one album?  I can add one at a time, but not all at once.  With 14 000 + photos scanned from slides, it is very difficult to organize these photos.  I can't sort the master file by file name, to find as "slides" are almost impossible.

  It would be useful that I can change the date and the location of all the photos in a single album.

  Thank you!  -Andy

  You must update to El Capitan that it update the photos to be able to do.

  When you select all the photos you want to give a specific location also.  Open the window "information" (command - 'I') and inside of him, you'll see "Add location" and you can enter in where it was taken.

  You can be very specific if you know specific addresses of the place where they are taken.

  R

• How to get latitude and longitude from a specific location

  Hi, we can get card giving the latitude and longitude. But I need to get the card when I give the specific location, like New York etc.. So how do you get the particular location points. I use the 8820 Simulator in eJDE4.5.

  can someone help me solve this problem.

  Thank you

  There
  integer
  Latitude in decimal degrees x 100,000

  x
  integer
  longitude in decimal degrees x 100,000

  See GPS and BlackBerry Maps Development Guide.pdf

• BlackBerry Smartphones running on "location Service.

  I'm trying to use Facebook on my mobile phone and be able to 'check in', as they call it.  Basically means that when I post will give my nearest location for example.  My phone tells me it can't because... "location service is disabled. Please activate in the Options of the terminal, location Services,"I studied all that I know not how, and no where have I found something on location Services.   Anyone know what this means and how I turn it on?  Thank you!!

  Hey Bina29,

  Welcome to BlackBerry Support Community Forums.

  To help you, what model BlackBerry smartphone and software version are you using?  If you use the smart phone BlackBerry 9550 appearing on your profile here is how to activate the GPS:

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/11499/Turn_on_Assisted_GPS_support_10904...

  Thank you.