Gl380 Gen9: Server HP GL380 Gen9 fan at bottom

Similar Questions

• I don't see a SQL server in the menu to the bottom when you create a SYSTEM DSN?

  What could prevent me from seeing a list of all the SQL servers in my environment when you create a SYSTEM DSN?

  The drop down menu has only a single SQL Server available. IM using W2K8R2 64 BIT and I have also installed the 64-bit SQL to ODBC client.

  you have dbo on the MSDB and the VCDB?  Whatever it is, no instance DB and no permission you should always see SQL servers in your environment. When you created the DSN system, you used the SQL Native Client not the SQL Server driver?

• PowerEdge r510 e1310 fan74 failed or rpm, off range.check fan e e1313 fan fans lost.check redundancy

  Buongiorno just back slab holiday ho gradually he nostro Server poweredge r510 e mi sono venuti fuori questi 2 If sul piccolo show, da explain che fan sulla quale ho error tranquillamente gira, a questo punto ho tried a the fan sulla scambiare porta nella quale mi dava error con una accanto my error viene rilevato sempre su quella porta della mainboard , entering sull' web interfaccia di configurazione del Server noto che quella fan viene segnalata con Velocità uguale has 0 e con error Reed to reach che gira tranquillamente mentre ventole sono senza error ed altre a Velocità normal ovvero 4560 RPM tranne una che viaggia al doppio della Velocità.

  Domanda e ORA: come posso risolvere questo problema? è a modo di risolverlo tramite software bios o o devo send it server per una maintenance?

  avrei urgent need di assistenza in quanto it server deve essere da, l'eventuale telephone number da cars 3425721234

  Grazie in pre-empted speaking saluti

  Buongiorno, is all the ventole girano correctly, provi a clear I connect dalla I drac.

  succesvamente esegua UN reset della stessa to idrac, is no risolve, server it spenga rimuova the side e tenga it looping di accensione be by 20 secondi.

  Ricolleghi it tutto e riaccenda.

  CI sono posisbilita che good it problema rientri.

• 2nd R710 PERC causes high rpm fan

  I installed a PERC H800 alongside of the already installed PERC 6 / i... Before installing the H800 server was quiet, the fans ran very low.  After you have installed the H800 fans run at 11-12 K rpm all the time.  Anything else except the addition of the second PCI card.  Is this normal?  Is that all I can reduce the fan RPM?

  The BIOS version of the R710's 6.4.0, firmware version 1.98

  The version of the firmware on the H800 is 12.10.7 - 0001

  The version of the firmware on the 6 / i is 6.3.3 - 0002, A-00

  Edit:

  http://ServerFault.com/questions/715387/how-do-i-stop-Dell-r730xd-fans-from-going-full-speed-when-Broadcom-QLogic-netxtr/733064#733064
  Found this, which is encouraging, but the IPMI raw codes do not work for the r710

  I consider this matter closed.  I spoke with Dell technical support by chat, it turns out that this server was still benefiting from the support.  They proposed initially that it was a temperature issue, which is obviously was not that the environment has not changed for this server in more than a year.  They also suggested that I have to move the map to the location PCI-E #3 by their engineer.  Apparently they are priority directions of slot.  I don't know if he was moving the map that made the tour or the fact that I had to turn off the system to move, but I was able to get all the fans (even fans of power supply) at a healthy level of mind.  Just so there is no confusion, here are the commands I used:

  ipmitool 0 x 30 0 x 30 raw 0x01 0x00 (this allows you to replace the system fan speed)

  gross ipmitool 0 x 30 30 x 0 0 x 02 0xff, 0x2c (it changes the speed of the fan, the last hexadecimal value has a range of 0 x 00 to 0 46.  I found that 0x2c is around 6 K rpm and pretty quiet but still allows sufficient air circulation to cool the system)

  I don't know yet why a RAID DELL card that is approved to be used in this server model this would cause.  I already have far too many hours trying to solve this problem, so I'll live with running these two commands in a cron to restart.  Yes, it should be run whenever the system is able to roll.

• required WebLogic 10.3.5 instllable for windows server 2008(64bit)

  Hello
  
  I tried to find the server (10.3.5) weblogic, CO (13.4), BO (13.4) and POS (13.4) installable for Windows server 2008(64bit) but I am unable to find in electronic delivery or anywhere elsewhere on the Oracle's Web site.
  
  Can someone please give me the link for downloading the software.
  
  Thank you.

  Hello
  On this link below, search for older versions of Weblogic Server that is located at the bottom of the page. Expand WLS 10.3.5. You have need Weblogic Server + Installer package consistency. Download setup generic jar.

  http://www.Oracle.com/technetwork/middleware/WebLogic/downloads/WLS-main-097127.html

  Below, this post for more details:
  Re: Why so hard to find WebLogic Server 10.xx for Windows 7 64-bit?

  Thank you
  Ravi Jegga

• Google says that Thunderbird does not respect safety standards. They specficly the list, Thunderbird and MS Outlook. Will there be an update that resolves this problem?

  I tried to have thunderbird connect and download email from one of my google accounts. I kept getting errors of password, then one email from Google on another account, telling me that this account has failed. partial quote below. They indicate that Thunderbird no longer meets modern safety standards. Will there be an update that will fix this?

  Quote and links of google with details about the new security configuration. --------

  Hi Bruce,
  

  Recently, we have blocked an attempt to connect to your account [...].

  Connect attempt details
  Date & time: Tuesday, February 3, 2015 02:54:40 UTC
  Geographical area: New York, USA.

  If it was you
  You can switch to an application made by Google like Gmail to access your account (recommended) or change your settings to https://www.google.com/settings/security/lesssecureapps so that your account is no longer protected by modern security standards.

  For more information, see https://support.google.com/accounts/answer/6010255.

  There may be an update, it is highly debated. "modern safety standard" Google are trying to force all power is a web standard not a standard mail. To work properly, the application should act as a browser. Something of a security problem for an email client that is not a browser.

  They mention Outlook or Thunderbird, as they are the soloists. The truth is there is not an email on the planet other than Google apps web client in a browser or on a mobile device that meet the standard. Want your Yahoo or Hotmail account to collect your messages to Gmail... No, they are less secure and in this function. Wish that Google can use to retrieve the messages of others... wow they use the less secure approach to POP and IMAP with password authentication.

  But Google now have your phone number to add to their gold mine limited personal information to serve adds with.

  The bottom line is to enable less secure apps. They are in line with standards applications. They are not less safe, they do not respect arbitrary authentication standard Googles.

• With lightning 3.3.1 TB 31.1.2, if you accept a meeting invitation does not pass, how to send an email to accept email again?

  I can't find anywhere to specify the e-mail address that uses lightning to send the email I agree. So I guess that it uses the default value specified in the server settings outgoing (SMTP) at the bottom of the account settings. Unfortunately, when I accept an invitation to a meeting, the default smtp server didn't work. Even if lightning (or Thunderbird?) says that email does not, fortunately marked lightning as a status meeting invitation: confirmed, response: I will be attending. And I have more buttons at the top of the email to accept this invitation.

  I've now changed the smtp server by default to one that works. How can I get Lightning to send another email 'accept '?

  Also, if I can tell which SMTP server to use when the confirmation of meetings of lightning, please let me know where.

  Thank you!

  You have the calendar list showing on the left margin of the calendar page?
  If this is the menu bar, select view-calendar-calendar list
  You must be in the calendar window when you do.
  If the list shows no, but check the option in the view menu, move your mouse over the left margin and watch the cursor change a arrow double header. When he left click, hold down and drag to the right to see the list.
  Now you can double-click different calendars in the list to open the dialog box change to this schedule.
  You can also double-click any event to open the edit event dialog box and move it to another calendar.

• Windows Update faulure 10

  I receive a notice from adobe that says that there are updates ready but when I try to tun I get (there was an error downloading this update. Quit and try again later.)  Sometimes it is said (invalid product ID): it's 10 on PC windows

  Hello

  You can try the alternative way to download updates, go here

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  On this page, you will see these instructions. You have to follow exactly in the case otherwise you will be denied access to server. Then go near the bottom of the page and look for the second series of links, as shown in the image below

  

  

  This will download your update, but you must do the installation manually by running as an administrator

  Hope that helps

  Terri

• HP DL180 Gen9 server: HP 10 GB 2 port 561T Ethernet adapter

  Hello

  Can you help me if this 561T HP 10 GB 2 Port Ethernet adapter is Compatible with my HP DL180 Gen9 Server?

  Thank you

  Mark

  Hello

  This compatible list does not DL 180, but it is compatible with many other DL Gen8 servers:

  http://h20564.www2.HPE.com/hpsc/doc/public/display?docid=emr_na-c03909467

  It must be. But my suggestion: talk with representatives of HP in your region drirectly, they are ready to help you.

  Kind regards.

• Server ProLiant ML150 Gen9 2012 UPS

  I have a new server HP Proliant ML150 Gen9 running Windows Server 2012.  I have a UPS 1500VA on it.  The server derives about 10% of the battery capacity, so I have 50-60 minutes of backup power.  The problem is, every time I cut the AC power to the inverter (or he falls for some reason any), the server shuts down and restarts.  There is nothing wrong with the inverter.  I have tested the UPS system, as well as tested the server with a second UPS 1500VA.  Whenever the AC power in the UPS turns off, the server drops and then restarts.  Why this is happening and how to fix it so that the server does not restart, but continues to operate?  It is the power of the battery in the ups, then why is it stall?

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - section ML servers...

  http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vk_XCOSFPGg

• With the help of MIcroSD on HP Gen9 server and ESXi 5.5

  Thought I would post this since I could not find the information anywhere and I spent some time trying to figure it out.

  Installing ESXi 5.5 on a server HP BL460C Gen9 MicroSD card could not be detected and was not included as a target of installation.

  I had to disable USB3 in the UEFI Gen9. After this, he began to appear as a target of installation available.

  I really had nothing definitive that led me to believe it was USB3. I was looking for HP and MicroSD problems. Whose most reported update the latest firmware of ILO (which I was already on) and then I found a few other vague posts on boot order and USB3. So I tried these two and reduced to USB3.

• I can't install windows server 2008 on HP ML350 Gen9

  I got windows boot of windows 2008 set up the DVD player. When the Setup screen is looked at to select the language, time and currency format, but I can't use mouse and keyboard. This isn't a job. How can I do?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Proliant dl380 Server gen9

  ЭТА ОШИБКА ПОЯВЛЯЕТСЯ DIZININE ЗАГРУЗКИ OFFICIALLY. HP table smart dynamic b140i. If output errors which justify a calling service we recommend that you download the healthcare system (AHS) active log before calling for service. The newspapers will allow us to provide better support for questions. RAID 1 создала на P440ar Smart Array. Если отключаешь в bioce hp table smart dynamic b140i. ПИШЕТ ЧТО СИСТЕМА ЗАГРУЗИТЬСЯ ЧЕРЕЗ 2 СЕКУНДЫ.

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - Proliant Servers section.

  http://community.HPE.com/T5/ProLiant-servers-ml-DL - SL/bd-p/itrc-264 #. Vtb5rWb2a9I

• HP DL360 gen9: logical processor of difference

  Hello

  I have a question about our DL 360 Gen9 server with windows 2012 r2 installed.

  On a single server detects the processor:

  Intel Xeon CPU E5-2630 v3 @ 2.40 GHz, 2397 Mhz, 8 Lossnay 8 logical processors

  While the other server with the same type and same operating system detects:

  Intel Xeon CPU E5-2630 v3 @ 2.40 GHz, 2397 Mhz, 8 Lossnay 16 logical processors

  Y at - it a setting or something I've missed, or it comes with the Board it self?

  Thaks,

  He solved, sorry.

  These Hyperthreading is disable, you must activate from the Bios.

  Thank you

• ProLiant DL380 Gen9 - grouping of NETWORK cards

  Hello community,

  for a week we have new servers DL380 Gen9. Now, we want to install a server Win 2008 R2, but we cannot create a collection of NETWORK adapters.

  If I install the HP NCO (Network Configuration Utility), cp023339.exe Version 10.90, I get

  "The bot software will be installed on the system because the required hardware is not present in the system or the software/firmware does not apply to the system"

  I updated the driver / firmware of the NETWORK adapter have sought new HP Network Configuration tool, nothing.

  NIC: Map 1 GB 331i 4 ports Ethernet HP

  Can anyone help?

  Thank you very much

  / Hugo

  Hello:

  You can also ask your question on the Business - servers DL HP Support Forum.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VHM-jHktC9I