keep the desire hp 4500 longer

Similar Questions

• Portege Z930: How to keep the battery alive as long as possible?

  Hello

  Got a Portege Z930 recently, I do not know how to manage the recharge of the battery in order to maintain 'live' as long as possible.

  I'm mainly using computer at home, to leave the battery and then recharge, but I'm not sure it's a good idea. I had an A-200 before satellite, also use it at home and keep connected all the time; After a few years, the battery capacity decreases

  Thanks in advance.

  Hello

  > after a few years, the battery capacity decreases

  It's nothing unusual after a few years of any battery would start to lose performance.
  Generally speaking after 500 times charge cycles the battery begins to lose clean performance.

  Of course you can remove the battery and could use the laptop only connected to the power adapter, but in this case, the laptop would shut down when making connection interrupted.

  To extend the battery work, you will need to calibrate the battery from time to time.
  To calibrate the battery, you must discharge the battery until it is completely empty. Then connect the power adapter and charge the battery up to full charge. Repeat this procedure two or three times in the line.

  Greetings.

• Global storage settings keep the desired configuration - help?

  8.1 Windows 64-bit

  THAT IS TO SAY 11.0.12

  Flash 15.0.0.189

  When I visit this link:

  Adobe - Flash Player: settings - Global storage settings panel Manager

  and I try to set my parameters of Global storage from 100 KB to 10 MB, it allows me to do that, BUT when I reopen it the Panel, I see that he went immediately to 100 KB.

  I need to be 10 MB because I store a lot of things. I keep running into questions to 100KB.

  I already tried to remove the Flash Player folder under "% appdata%\Adobe" and "% appdata%\Macromedia", but that he has not solved.

  How can I get my 10 MB Global storage settings and STAY go?

  Thank you.

  Yes, this looks like a bug specific to IE on Windows 8 and higher.

  I submitted the bug following on your behalf: Bug #3840386 - storage settings Global [Win8.x], Control Panel does not work in Internet Explorer

  As a temporary workaround, you could use Chrome.

  Thank you!

• Microsoft mouse 3500 battery may not last long and keep the LAG

  I bought a mouse Microsoft 3500 Feb 2011, when the battery is finished, I replace it with the same brand new even one, with the previous battery that come with the mouse, after I have change the battery it only last for 5-6 days. The Dungeon of the problem exist, battery not last long. Continue to change.

  Another problem is my mouse keep lag when I use, plug another computer also same problem.
  He moves such as not so easily, keep the LAG, lag, move.
  When I make a comment at Microsoft Corporation, they replaced a new mouse Microsoft 3500 for me, the same problem with the mouse.

  Hello

  I suggest you to contact the support material for better assistance.
  http://www.Microsoft.com/hardware/en-us/support

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• Setting the language on a desire to 4500

  I am a contractor who works with Japan (Yokosuka). I need a printer/scanner and found the envy of 4500 to an electronics store. The sellers tell me (I think), which will come with a manual Japaneese and be set up for Japaneese only envy. I see that I can download a manual in English and wants to buy the 4500 all-in-one. If I do, I'll be able to change the language to English when I put in place? And the online manual will be the same?

  Thank you

  Dougbear

  Hello

  Yes, the pritner invite allows you to change the language and the country during the first installation.

• 114 the desire: my HP Envy 114 sometimes works, sometimes doesn't work with WIFI - it of maddening! Help!

  Hello!  Help

  I use an Apple IMac with my desire.  Since the day that I bought it, it is quite tempremental. Sometimes the wifi works, sometimes it doesn't... often I have to go through the procedure of the full wizard and re-install the password of our wifi (which is a mile long, so it's not phone). Wifi works throughout the House and is strong, so is not the issue. the little blue light flashes and turns off right now, and disconnect, restart it, nothing seems to make it work

  then, suddenly, if he decides-it can print a page.

  It has been 18 months since I bought it and I just want to scream. I have wasted hours and hours of my day coaxing to work!

  I've never managed to get the scanner to work, either...

  Can someone please help! I use Mac - OSX 10.95 products

  I think to have a USB port and attach it and done with this wifi - but what is the point of having this beautiful instrument, if it never works?

  is there a problem?  can it be restarted and keep the wifi settings? How stay blue and not turn on and turn off that darn light?

  Help!

  Hey @janinedigi,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you experience an unstable WiFi connection when you use your HP ENVY 114 e-all-in-one printer.  I would like to help.

  When users report this kind of problem, I generally recommend from scratch with the installation program. Namely, start this process of restoring factory default values * of your printer.  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • In the front panel of your printer, press Setup key wrench
  • Touch tools
  • Support on restore defaults.

  Then fix permissions of the disc on your Mac - click here for instructions.

  Once you complete these steps, you will need to re-enable wireless and Web services (if you are a user of ePrint).  Before doing this, click here for extensive troubleshooting and configuration steps for the question says that you are a statement.  Work your way through the Solutions in the order presented.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• Is it possible to keep the timer "always on top"?

  When you use the timer I like to keep the timer of disappearing from the screen saver, but I didn't understand how to do... If that's possible.  After the timer starts, he goes down to a few seconds and the clock face appears again.  To check the time remaining on the timer, you must click to the home screen and select new application timer... which, in few seconds again goes to the background and the face of the clock reappears, again he must open the clock app to see the remaining time.  If there is a way to keep the timer "on-top" without having to repeatedly touch the screen during execution of the timer, I have not discovered.  I would also add the timer to my eyes so I can toggle to him as well.  Of course, I can do it on my iPhone, but the Watch has not yet this ability.  Apple engineers could make sure with the timer and the timer if they see the need.  Are there others who want that ability as well?  I think so.

  Hello

  It is not currently possible to add Timer looks. However, your watch can be configured for more convenient use of the application of the timer:

  • Set your watch to return to the last app used to raise your wrist:
    • On your iPhone, in the application of the watch, go to: Watch My > General > wrist Detection - turn on.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
      • Raise the topic on the wrist, select RESUME last activity.

  After you start a timer by opening the timer app, your watch will return to timer (for as long it remains the last app used) when you then lift your wrist.

  • Add a Timer to your dial of the watch as a complication. When you view the time on your watch:
    • Firmly press the display > drag left / right to the face of the watch you want to customize (not to slip if you want to customize the current face of the watch).
    • Press the Customize button.
    • Some watch faces offers more than one screen customization options > move left until you reach the last screen to select (if available) complications.
    • Tap a complication to customize what is shown in this place.
    • Turn the digital Crown to scroll through available there complications until you reach Timer.
    • Press the digital Crown, then press the dial to return.

  To start the timer directly from your watch dial, press the complication. Once started, the remaining time will be then showed complication on your watch until the end of the timer dial, when the application opens for you to make them disappear.

• Hi, I want to migrate Aperture library 3.6 to Lightroom and when I double click on Aperture App it won't open. I'm on OSX Yosemite 10.10.5 and I keep the nearly 200 gigabytes of photos on a hard drive that is separate so I can get to o

  Hi, I want to migrate thousands of images of Aperture library 3.6 to Lightroom and when I double click on Aperture App it won't open. I'm on OSX Yosemite 10.10.5 and I keep the nearly 200 gigabytes of photos on a separate hard drive so I can get more old photos looking at the content of the package and by copying and pasting in a recovery file, but it will be painful and very long. What do you suggest me? I thought that Aperture 3.6 was supposed to open at Yosemite or El Capitan? Thank you bripoppamac44

  and when I double click on the App opening, it does not open.

  What happens, when you try that? You get an error message? If so, what error?

  Opening 3.6 works well with Yosemite 10.10.5.

  d I keep the nearly 200 gigabytes of photos on a disc hard separated so I can get more old photos looking for the content of the package and by copying and pasting in a recovery file

  What is the file system on this disk? And how the player is connected?

• Fact film GoPro 17sec and now cannot delete 2 hours cause records he says be used? I just want to keep the movie not all the extras.

  I want to know how to remove all these records without value shows saved on my macbook and just keep the 17sec movie I recorded on my computer I made in the studios of the GoPro. Trash can said that I can't cause its used. So I have to save the record with my phone and then erase everything? Seems silly and wouldn't look professional record the computer screen, but I will if I have to, so I fill my computer with video of pure filler.

  Leave the Photos, if the items from the trash are no longer used.

  To empty the Recycle Bin, and then try again.  If the items are still in use, restart the Mac, then try again.

  That have you tried exactly to remove? Only video clips?

• Difficulty keeping the theme Default Theme/Luna of Windows XP active, but also personal painted.

  Hello! I recently had problems disables default Windows XP Theme (Luna) as well as to keep my desired active wallpaper. When I try to load the theme, I get a message saying that the theme service is not running and that it can be turned on with the computer management administrative tool in Control Panel. I locate this time before and he had run for the current session, but when I turned off my computer and it back the next day the problem persisted and I was unable to set and operate properly since. Is there something that someone out there can do to help me solve this problem?

  It's just a problem related appearance, but it is one that really bugs me because I can't seem to find how fix and make it work. My computer is an old Dell desktop computer I bought brand new back in 2003. I considered just the upgrade to Windows 7, but the computer is so old, it does not have Windows 7 and I currently can't afford to buy a new desktop system. Can anyone provide any help would be extremely useful.

  Hello

  To retrieve the theme default XP also as follows called Luna theme the steps below:

  1. start the themes Service:

  a. click on start

  b. Select run and type services.msc and press on enter key

  c. services window open.

  d. service themes highlight and right-click on it and select properties and verify that the startup type is set to automatic.

  e. If the service is stopped, click the Start button to start.

  2. Locate the theme Luna file manually:

  a. right-click on the desktop and select Properties.

  b. on the themes tab, select the browse option.

  c. find the C:\Windows\Resources\Themes\Luna.theme file and apply this theme.

• How can I keep the photo files id3 tagging? (And video files?)

  Hello.

  This question is about id3 tagging files photo (and video?). Probably, it revolves around managing the media too.

  I have tif and jpg files that I took of the old and the new point and shoot cameras. What I'm trying to do, is to have jpg and tif of the originals. Make some changes and have a jpg and tif amendment. So I have 4 files for each image (2 independent is the original and 2 Edition). I want a lossy and lossless for each file.

  I've bothered to fill out somethings in the id3 tagging. When I tried some changes in batches to get the files, id3 tags was empty.

  I use Windows XP SP3 Home Edition 32-bit. I tried to use FormatFactory to an export batch. I use Corel PaintShop Photo Pro X 3 also, who gave the same results.

  In Windows XP: I right click on the file, the Properties tab, I think it's the details. In my view, title, author, subject, keywords, comments. It's the id3 tagging which not copied.

  When I right click and COPY a file, it keeps the id3 tags.

  I really think there's a way to deal with this. Anyone use? Nobody cares? Need scripts and a certain program? I don't think that I would have to pay for it. How professionals and more or less experienced people do it?

  I don't want a markup that is recognized by some programs. I can do that already, but it is too advantageous. I won't tag id3 4 times. I don't want a watermark.

  Are the methods or rules identical for Win Vista, Win7 or Win8? I have 32-bit and 64-bit Vista Home Premium, but have not tried it on there. I have to start the migration of files again. Vista is choose with id3 tagging anyway from what I tried. I keep said that Win7 is similar or the same.

  I thank you very much.

  A place to start...

  When a photo is copied... a new version of the file is created.
  During this process, some software will remove metadata
  in the file properties.

  The only insurance that I can think of would be to make a backup of the
  metadata, then restore the metadata if it is deleted.

  The following freeware has not been updated in a long time, but is
  a proven method to backup metadata.  Also the site
  suggests other alternatives.

  Exifer for Windows
  http://www.Friedemann-Schmidt.com/software/Exifer/

  Good luck...

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213

• Stop synchronization of windows with the file is no longer available

  How to prevent synchronization of windows trying to sync with a folder that no longer exists? I'm working on a windows XP computer that had a network folder shared on our old domain controller. It was created to "work offline". This former DC has since died, but the XP machine is still trying to synchronize with him whenever he disconnects or connects.

  I tried to delete all the files temporary/offline, I tried windows Explorer and go to tools > Synchronize and then unchecking the file that does not exist. I tried to go to the configuration of the synchronization and UN-checking the folder to synchronize when connected to the LAN. Nothing seems to prevent synchronization attempt. There are also other folders that exist that I want to keep the synchronization with, so I don't want to completely disable synchronization. Does anyone know how to make so that he can stop sync with just this file?

  Hello

  You can try the troubleshooting steps provided in the link below in case you haven't tried them already.

  How to use offline files in Windows XP
  http://support.Microsoft.com/kb/307853

  For more assistance, you can publish the isuse on the link below.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/