GPEdit Windows 7 application locked out

I had thought to restrict access using gpedit would apply to non-administrative users. Evil. I enabled "Run only specified applications" with the possibility of one customer to run application. Now I have myself blocked basically to do anything on the PC. Is there anyway to access gpedit as an admin so I can solve this?

No, we have finally found a web page that has a solution. There is a file that can be deleted to remove the policy. I believe that we have started in safe mode with command prompt, delete the file and everything worked.

Tags: Windows

Similar Questions

  • Windows Live ID locked out for more than 2 weeks

    Original title: HELP! LOCKED OUT FOR 2 WEEKS! NO CUSTOMER SERVICE HELP!

    I've been locked out of my Windows Live ID for 2 weeks now, I don't remember my security question and the automated password recovery system maintains the drop me! I NEED to get back into that account as its linked to my account xbox live! Help!  What can I do about it?

    PS. I had to create a new hotmail account to post here but I still need access to my normal account as its related with my xbox gamertag

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • My account Adumim - Windows 8 PC locked out

    Okay, so I signed up yesterday in my PC as I normally do with my PIN four-digit. After I registered I left my only computer, causing it to switch to "standby" mode. When I tried to sign in, I realized that my enter key was a top task, so I wiped it while pressing the key several times. It's the only thing I've done out of the ordinary, so I think that's what caused the problem. Which brings me to the next point, the problem. I know that my PIN, but I do not know my password and pressig who enter kry several times, seems to have caused my pc to swith the opening of my rather pin password code and I can't change it to the PIN or sign in to my account. Please, someone help me and his mercy on typo or grammar one errors

    error, im on my mobile device. Thank you

    If you enter the wrong PIN code several times, Windows treats the computer was stolen and requires that you type your password to set.  If you're not, the solution is to clear your computer and start over.  We are not allowed to help you bypass your password (how do we know that the computer was not stolen?)

    However, if you have another administrator level account on your computer, you can use that to reset your forgotten password.  If there is no administrator account on the system, you can start safe mode to access the built-in Administrator account.  Since this fail-safe account, you can force - reset your account password.

    1. Press + I to display the menu of charm.
    2. Click the Power Options icon, and then hold down the SHIFT key while you click the Restart option. Keep now shift until the screen shows it restarts.
    3. On the first screen that appears, select troubleshooting, and then select Advanced Options. Finally, choose the boot settings and click Restart.
    4. On the next screen, press the number 4 to choose Safe Mode.

    Now that you are in safe mode, you can use the backup Administrator account built for perform you a necessary recovery. Built in Administrator account should not be used for any other purpose, or it is not available in such situations when you need it.

    1. On the login screen, click on the arrow icon, and then select the administrator account.
    2. After the Safe Mode boot, press on + W and open the control panel / user accounts.
    3. Select manage another account, and then select the account you want to switch to an administrator account. You can also use the option change password here to reset the password of the other account.

    When finished, restart the computer normally.

  • Windows live mail locked out

    Windows live mail keeps asking for my password and returns with Error 0x800CCC0E socket 1001

    Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

  • My Windows Tablet 8 locked out

    I have a Dell place Pro 10 I just bought.  I took in a meeting and could not connect because I forgot my password. I tried a few different things (they were near right) but was not able to participate.  When I got home, I looked at the password, but when I started my tablet, instead of going in the newspaper on the page it just showed my name and email. I tried everything (dragging, Sting, etc.), but nothing works.

    I even plugged on my desk, but it wouldn't recognize it (perhaps because the office is Win 7).

    Please help me or I paid just for a piece of plastic!

    TIA

    Hello

    Thanks for posting your question in the Microsoft Community.

    I'm sorry to know that you are facing this problem.

    Please answer these questions to get more clarity on this issue:

    • You try to connect by using your Microsoft account credentials?

    • Are you able to connect to the Local account?

    • What is the error message you get all trying to connect?

    Answer us with more information to help you further.

  • my laptop with 7, the other with vista does not, windows message told to go update that does not exist on the start menu. I'm locked out using my computers

    my laptop, 1 vote against and 7, the other with vista will not work.  I use norton 360.  message at startup said to go to microsoft update on the start menu.  There is no windows update in the start menu.  I'm locked out using my laptop.  Help, please

    For Vista, see http://windows.microsoft.com/en-us/windows-vista/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows-vista/Updating-your-computer

    For Win7, see http://windows.microsoft.com/en-us/windows7/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows7/Updating-your-computer

  • Windows Vista locked out! ___

    I tried to empty my password system and admin as the instructions said pressing the SPACEBAR through passwords and now all I get is enter password system, I am locked out. The old passwords will not work. It will not boot to Windows! How can I go back in the system and it starts up?

    If you have a Windows Vista DVD disc or repairs, then follow this tutorial:
    http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-regain-access-to-your-administrator-account-in-Windows-Vista-using-system-restore/

    It's from Microsoft Support. Method is identical to the above.
    http://support.Microsoft.com/kb/940765/en-us

    Other that that, we are not allowed to help the users of 'crack' password forgotten or not valid.
    Here is the link to MS political Answers to this question:
    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Windows vista need to install windows 7 locked out

    I'm trying to install windows 7 but am locked out of windows vista, so I have no way of execution of the installation dvd.

    You will need to do a clean install of Windows 7, with a disc FULL of 7 Windows/license, if you can't get in your Vista operating system.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7 has become my comments login and I'm locked out of admin

    Hello

    I've been running W7 Pro 64 bit very happy for two months. When I installed, I made a user account for me with admin privileges (I'm the only user on this machine). All of a sudden yesterday I noticed that I could not do some things and on investigation found that W7 has become my admin account a guest one. Same account name, icon, the user files, but no right! I did nothing to cause it, as far as I know, it just happened. I don't think it's a virus, Kaspersky certainly is not report anything.


    I tried to boot from the DVD and by defining the built in Administrator account, but that the command window told me that the command executed successfully, when I restart I see no administrator account. Because I'm the only user I had previously defined netplwiz to connect automatically and I can't disarm that - I just get a window saying 'entry password administrator to run netplwiz' but there is no password box, probably because that there is no administrator account on the system.


    I seem to be completely locked out from changes to the admin of my system. First thing I will do when I get the machine working again, is to create an alternative admin account to use if it never happens again, but for now, I'm completely stuffed.


    Can someone help, please?


    Thanks in advance for your suggestions.


    TP


    UPDATE: I booted in safe mode with command prompt and run lusrmgr.msc to view accounts. Administrator account is here, just can't see on login screens. I thought that the administrator password should be blank (or perhaps the same one that I put in place with my initial admin-level account), so I tried shift-right-click netplwiz and selecting run as another user, and then typing in Administrator and white as well as a selection of passwords possible. No joy. It does not accept any combination of names of users and passwords.

    So, how to use the administrator account?

    Aaaaaargh!

    I have fixed my problem on Windows 7 guest user.  The problem is after I added the computer successfully in my area, I decided to change the name of the computer. So I changed the name and the past of the domain to the working group. After rebooting I connected under the no original domain account, I created, but it was no longer a member of the administrator group and has been labeled as guest user account type.  I had not enabled the administrator account.

    The solution: press F8 at startup for Advanced Startup Options.  Select the option 'Safe Mode with command prompt'.  I was given the opportunity to log on as an administrator, and I did.

    I entered my orders, first to change the admin password then command to activate the administrator account:

    "password net user administrator"-password the password to use.  (Password must meet complexity requirements)

    "net user administrator / Active: Yes.

    Computer restarted and I is presented with the option to connect as administrator.  Connected and managed to create a new account and add to the domain.

  • Locked out; How can I change my password to windows 7 without signing in?

    I recently went for about 8 months for school and left my HP G62-225dx, with WIndows 7 on it, at home. Recently, I came back and forgot the password in the meantime. Is it possible for me to change the password without A) lose my files or B) connection on my own profile?

    I tried the "Safe Mode with network" thing, but all that was to take me for a version slightly zoomed in to my regular account.

    If someone could help me out here, it would be great.

    There are a lot of options built into Windows to help you out of this situation:
    • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
    • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
    • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
    • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
    • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
    • Check your paper files (works only if you threw down the password somewhere)
  • I am running Windows 7 Professional. Unable to connect, do not accept the password. Locked out! How to get back IN?

    The last time that I turned my computer off all seemed well.  When I turned it on, once again, I was unable to connect using the same password that I have been using since the user account has been created.  I can't sign with my accout used regularly (with administrative privileges) or my administrator account.  Whenever I try a message appears on the upper left side next to a small red circle with an "X" in the middle that says "Windows Security" white. And right below says "HRESULT 0 x 80074003.»  Why can I not sign? Why won't my password?  Please tell me that there is a solution. I have a lot of important things on my computer that I can't afford to lose.  When I tried to back up my system on an external hard drive, it would not even show up either of the two hard disks on the computer and apparently does not recognize external hard drive 500 GB.  He has always tried to save everything on the internal 'C' drive. Since there is not enough space to back up my system, I get a message saying that there is not enough room and choose a different disk and try again.  I need HELP BAD!

    The last time that I turned my computer off all seemed well.  When I turned it on, once again, I was unable to connect using the same password that I have been using since the user account has been created.

    I have a lot of important things on my computer that I can't afford to lose. I need HELP BAD!

    There are a lot of options built into Windows to help you out of this situation:
    • Restart the computer with your Windows repair CD, then use system restore to set Windows to a point when your computer worked well.
    • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
    • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
    • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
    • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
    • Check your paper files (works only if you threw down the password somewhere)
    On the documents, you cannot afford to lose: there are three groups of people.
    • The largest group: those who do not back up their important files or save them only once in a blue moon.
    • A small group: those who now save their files frequently because they have suffered a major disaster.
    • The smallest group: those who back up their files regularly because they prefer not to wait for the disaster to happen.
    There is a gradual migration from the first to the second group. The transition can be extremely painful. You can probably save your files this time but next time you may lose the lot unless go out you in the first group.
  • TrueSuite Fingerprint Software me lock out of my files!

    Help!

    I use the TrueSuite Access Manager very happy five months for some of my files important protect from prying eyes. Suddenly, today, when I try to "unprotect" them, I get a message saying "Invalid"File Protection Key"". The fingerprint reader works fine and TrueSuite Access Manager accepts my footprint quite happy.

    I am using Windows XP Pro. The only things that have happened since I last accessed files successfully was a download Microsoft Tuesday last week and my Norton Internet Security 2008 installation.

    I really hope you guys can help ' cos I need to access these files.

    Steve

    PS, I tried to restore to a previous system restore point, but they all fail...

    Well, here is where I have to this day...

    The TrueSuite Access Manager is provided by AuthenTec, but is actually just a rebadged version of the Password of ABIG software. The site Web of TrueSuite disappeared off the internet (although you can find one or two references to the fact that there were once). AuthenTec or ABIG offer any support whatsoever. So the only source of help is Toshiba...

    I traced the beginning of my woes to an application error logged in the log of the events of Win XP - fingerprint software didn't. The description of the error says only: "prints notifier Application digital Suite has encountered a problem and needs to close." Large. The application error has somehow broken the link between fingerprints recorded and the key used to 'protect' all my files. Even having a back-up fingerprints was useless, because that was the link between the fingerprint identification system and the file system of Windows that was broken, not fingerprint information...

    I rang the Toshiba help line, who recommended to download and install the latest drivers. What I've done. It made no difference.

    I managed to roll back to Windows to a date earlier than the application error (the problem I had before which prevented me to restore the system to an earlier date was caused by Norton internet Security, a "known" feature). But even once it made no difference.

    So where am I today? TrueSuite has lost the connection between my fingerprints and the key that he used with the file system Windows to protect my files, I was in turn locked out of all files. I can't access, copy, move them or delete them, BACK or Win XP. Toshiba recommendation is to use the provided with the laptop recovery disks and to reinstall Windows XP from scratch. Of course this will not return me my information, but at least it will remove all unnecessary files and free up the space occupied by them!

    Lessons to be learned - if you use TrueSuite to protect your files, think twice. If you want to continue to do so, back up all your files before protecting them. Of course, the backup version of the file will not be protected fingerprint (bat rather the object of the exercise, is not...)

    Good luck.

  • I was completely locked out of my msn e-mail account

    Because I typed the password wrong too many times I've been absolutely locked out of my msn account.  Even when I type the password, I get an error message.  How can I get that back?  I would like to talk to a live person to resolve this, how can he be sued?  I want that account back much, please guide me to the help that I need.
    THX

    Hello

    I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

    Please repost your question in hotmail in the hotmail link below forums

    http://windowslivehelp.com/product.aspx?ProductID=1

    Forums
     
     

  • locked out of my error of the portable computer, your PC is in offline mode. Please sign in with the last password used on this PC"

    OT: locked out of my laptop.

    Hello, I have an Asus with Windows 8, and last night my friend locked me out of my laptop by pressing on enter far too often. Now I can not connect on my laptop. Whenever I get my password it says "your PC is offline.". Please sign in with the last password used on this PC"and I really need to get inside because I have a great duty that I have to finish and return. I really need help.

    Hello Tiana,

    Thanks for posting your query in Microsoft Community Forum.

    Of course, I understand the feeling of being locked out of computer especially when you have something important lined up.

    In this scenario, you perform Refresh if you have Windows 8 DVD with you.

    How to refresh, reset or restore your PC

    Warning: Apps that you have installed Web sites and DVD will be removed. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

    In case you don't have a disc, you can contact Asus that can help reset the computer to factory settings.

    Contact us - Asus

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

    Thank you.

  • why I'm locked out of watching one of my screenshots?

    I was taking screenshots for a test that I prepare and now I'm locked out of which they are considered.  I get this message: the file 'Screen shot 2016-06-02 at 12.57.15 PM' could not be opened, because you don't have permission to view it.  To change the permissions, select the item in the Finder and choose file < get info > but it gets me nowhere.

    Please, back up all data. Leave the preview runs.

    Hold down the option key and select go ▹ library in the Finder menu bar. In the library folder, delete the following, if they exist:

    Containers/com.apple.Preview

    Containers/com. Apple.QuickLook.UI.Helper

    Group Containers/com.apple.Preview

    Preferences/com.apple.Preview.LSSharedFileList.plist

    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

    State/com.apple.Preview.savedState request registered

    Sign out and then sign back in. Launch the application and test.

Maybe you are looking for

  • Is TSSTcorp CDW/DVD TS - L 462C supported 32 x CD - RW or not?

    Hello I have a question about CD - RW.My CD - RW drive is [TSSTcorp CDW/DVD TS - L 462C], it can support BenQ 32 x CD - RW Media? Thanks in advance.

  • PCMCIA.sys problem with Vista on Satellite M40 135

    Hello (Sorry for my English)I tried to install Windows Vista on my Satellite M40-135. (I added the 512 MB of RAM). But, like all users, I have the problem with pcmcia.sys. Vista starts successfully when I delete the pcmcia.sys file.But I have a probl

  • showing results on the image

    I have input and output image. I want to view the resultatas in the input image - black pixels of the output should appear in red on the input image Any suggestions? I want either detected cracks visible as red rest remains the same Any suggestions?

  • Analog triggering on PCIe-6251 using BNC-2120 on Mac Pro?

    Hello all- There, does anyone know how an analog trigger using a PCIe-6251 card connected to a box of BNC-2120 interface?  I am running LabVIEW 8.6 on a Mac Pro OS 10.5.6 and my VI of analog data acquisition seems to work but hangs up waiting for a t

  • iwhy can't do the window update

    Im trying to do an update on internet butis impossible to do. could you please help me on this. Thank you