GPIB connection block manual access to the DG535
Dear all,
I'm relatively new to the labviw. I wrote a program (in labview 7.1) to contact generator of Princeton Reserch systems delay DG-535 using GPIB. It works very well! However, I have a little problem here. As soon as I have the DG535 communication using labview program it blocks the manual operation of the DG535. Even after I stop the program, I can't access all channels. I have to restart the DG535 to operate it manually and it repeates every time that I try to communicate via GPIB using my vi. I tried closing the labview to see if communication is complete and I can access the DG535 maually, but it did not work. Someone in this forum had the same problem? If it of normal or not. If this is not normal, so what is the solution to put an end to the DG535 via GPIB communication and reactivate the manual access without retarting the DG535.
Thank you much in advance.
Best regrads
Champion
It is quite normal for an instrument to stay in remote mode. Most of the instruments have a "local" button Alternatively, you can issue a command to GPIB GTL (go to Local) with VISA.
Tags: NI Hardware
Similar Questions
-
I have three children who have separate user accounts on our two computers. Both computers running Windows 7 Home Premium edition. We use Windows Live Family Safety on each computer to our parental controls for defining when and what each child can access. We used the period of parental control feature to block every child signed to computers, except when we allow. (It would be nice if we could block a computer and allow them to use the other.)
However, I can't find a way to allow a child to not use the computer for local activities (for example, Microsoft Word), while blocking its access to the Internet. I also want to allow his brothers to continue to use the Internet during this time.
Any help would be appreciated. Thank you.
Hello
Windows parental control have no option to directly block access to the internet in a Windows user account, because the system needs to provide activity reports. To work around the problem, you can block all internet browsers available for this user account so that the child have no way to access the internet. Restriction of the app to access the control that installed programs on the computer children. Here are the detailed steps to block some apps:
1. on any computer, log on to the parent account for http://fss.live.com
2. click Edit settings under the name of the child you want to change the settings and then click the App restrictions.
3. check the circle next to turn on the restrictions of the app.
4. check all programs related to access to the internet or type the application in the area of Search apps .
5. check the box next to the application or the program once it appears in the list.
6. click on Save.
This settings apply only to that specific user account. If you have any other questions, please let us know.
Thank you!
-
I have been a member of the CC, but had to leave for financial reasons. I have re installed my old version of CS6, but I get a pop up blocking my access to the program and telling me to renew my membership. What can I do?
You are right!
Try to uninstall the full CS6 using Adobe - Adobe CS5 Clean Tool and then install it via applications download Creative Suite 6
Hope that helps!
-
From Firefox blocks all access to the network
When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.
As far as I KNOW, I have not installed lately extensions or add-ins.
Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).
(https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.
When this isn't ' t the resolution, I will surely return to your resolutions.
-
Hello
We build a new configuration of lab that will need hardware in the loop detection by sensors data and formatting / analysis using programs and possibly return data in material for the control.
We are confused that the connection block shielded BNC (who has the outputs and analog inputs / digital) or a DAQ hardware for can be used?
What are the main differences between them?
shed light on the above is very appreciated...
Best regards
FESMI
FESMI wrote:
We are confused that the connection block shielded BNC (who has the outputs and analog inputs / digital) or a DAQ hardware for can be used?
Data acquisition is what is the real measure of the signals. The Terminal is just a simple way to route signals for data acquisition. If you can actually the terminal box, cable and card DAQ.
I highly recommend talking to your representative local sales OR to make sure that you get exactly what you need.
-
I use a Maxtor Ultra 16 L01F500 SATA, but Win7 (64 bit) is to identify it as a SCSI drive Maxtor L100P0. He not only identifies by mistake, but also blocks access. I get an error indicating that the location is not accessible. Under computer management, the drive is there and gives the correct size and format (NTFS - was previously my main drive until I upgraded to Win7) when we look under properties. Also, Windows shows the drive is healthy and active. Don't know what to do to get access again (I have admin access to the player thought that would help). I also ran the disk error checking and it showed no errors. You don't know why Win7 has misidentified or why it will not allow access. Any info or help would be appreciated. I can't seem to find the drivers for the drive, otherwise I would have tried that. Thanks for reading.
In disk management, remove this disk partitions, and then create a new partition
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
blocking direct access to the oracle server
Dear Sir
One of our condition of pci - dss to stop direct access to the db. One solution I know:
TCP.validnode_checking = YES
TCP.invited_nodes = (192.168.1.91, visionhost.solutionbeacon.com)
But this option will allow the IP address of the node invited with sqlplus using tns names also. Have any have experience to solve the problem of ending up with pci - dss?
In which paragraph of the PCI - DSS doc that makes you think that there is a problem? I work with version 3.0 (November 2013) and I can't find anything like that. For example, paragraph 8.7 c, "review of database access control settings and application of database to verify configuration settings that the user access directly to the or queries of databases are limited to database administrators" does not say that the DBA is not able to connect to the application server. And all the stuff of firewall in requirement 1 close the access to the network and between networks, not within the network.
Are you sure that you have a problem? There is no interest to 'fix' something that doesn't have a reference in the doc.
-
I'm unable to access the internet (IE), I am able to enable safe, it is blocked. This program wants me to buy Vista Home Security 2012 to clear up problems with my computer. Programs also indicates that I have many viruses and my information has been compromised. Is there anything I can do to fix the problem. I noticed that there is 2Point controlling the network.
Hello
Here's a guide to deletion, including workaround for no internet connection:
http://www.bleepingcomputer.com/virus-removal/remove-Vista-Home-Security-2012
"It is possible that the infection you are trying to delete does not allow you to download files on the infected computer. If this is the case, then you will need to download the files requested in this guide on another computer and then transfer them to the infected computer. You can transfer the files via a CD/DVD, external hard drive or USB key. »
Please follow all the steps described in the guide to deletion and do not skip any.
See you soon.
-
I have a Dell PC with Vista 32 and recently clicked on an autoUpgrade for iTunes and QuickTime to version 10. Since then, Execusion Data Protection has blocked the program and I can't get access. I tried to download again, but the problem persists. I tried to go to the advanced security settings to turn off DEP for the iTunes program, but the program is so listed or identifiable on my PC. Opinions of this site have been completely uninstall iTunes and Quick Time, followed of a systems to clean and then reinstall the iTunes with a DEP-compatible version. Should I do this? If I do that I lose all my music files, music downloaded from iTunes store, if I uninstall and start again? And where can I find a compatible version of iTunes DEP?
If you have a backup it matter, if you do not, make one.
You don't want trouble right of itunes? This happened for months and months., would you rather live with her as she is now?
-
IWAS in a placw with a wi - fi connection, but could not get to the internet. Says limited access. Have never had this problem before and don't know what to do now. I tried through repair ang features, but nothing to do. Any help would be appreciated.
Hello
I suggest you refer to the link mentioned the problem below:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
I hope this helps.
-
Ipad Cisco ipsec VPN connects but not access to the local network
Hi guys,.
I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.
If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.
Cisco 877.
My config is attached.
Any ideas?
Thank you
Build-in iPad-client is not useful to your configuration.
You have three options:
(1) remove the ACL of your vpn group. Without split tunneling client will work.
2) migrate legacy config crypto-map style. Here, you can use split tunneling
3) migrate AnyConnect.
The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.
-
Block of access to the Web interface Ubuntu switches
Hello
I have a journal entry:
<14>30 sep 11:59:05 UNKN 192.168.202.247 - 1 [2173068724]: dtl_net.c (2177) 9% entry not found mac: 0x0: 0 x 15: 0x5d:0xffffffca:0xffffffae:0 x 2814>
I can't ping the switch.
Other OS I have access.
What is the cause of the problem?
You have as I can eliminate this notice.
Thanks Mike
I found the solution, the latest firmware (06/2015)
Thank you for your help.
Mike
-
I can't windows Defender to turn on this block my access to the list of startup programs. Is their another way to access the list of programs stsrtup. LSO the window showing the windows Defender is turned off freezes
1 AV (anti-virus) following programs will stop Windows Defender.
It's normal.
Norton
McAfee
AVG
Microsoft Security Essentials2. There is another way to access your startup programs...
Start > in the search box, type msconf > press the Enter key > uac prompt > at the top, click on start > there is the window showing all your startup programs.
To disable... .uncheck the box in front of the entrance
Click OK when finished.
-
Cannot "connect as current user" via the Security Server
Hello community,
I had a problem using the "connect as current user" option against a network outside of the enterprise security server. Connection by manually keying in the name of user and password works very well from the outside the company network For internal connections using a connection to the server instead of security server, everything works as expected without having to manually type the name of user and password.
Single domain
Customer of the horizon is 3.5.2 and joined to a domain
2 Security Server 6.2.1 x
2 Server 6.2.1 connection x
On one of the servers of connection I got the following error message when you try to connect through the horizon customer using the option "connection as the current user:
2015 12-28 T 20: 21:15.207 + 01:00 INFO (B 0, 08 - 0E34) < ajp-nio-8009-exec-7 > [PAEContext] (SESSION: a774_ * _b2fb) Idle Timer executor by using 1 thread (s)
2015 12-28 T 20: 21:15.625 + 01:00 ERROR (0744-0AEC) < MessageFrameWorkDispatch > [ws_winauth] [GSSApiProcessServerContext]: negotiate failed. Error 0 x 0000000080090300 (not enough memory is available to complete this form) {SESSION: a774_ * _b2fb}
2015 12-28 T 20: 21:15.626 + 01:00 (B 0, 08-04 B 8) WARN < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) failed connection GSSAPI: not enough memory is available to complete this application
2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) cannot close the context 7 36 d-*-00D 3 with the error: unable to locate the context requested
2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiAuthFilter] (SESSION: a774_ * _b2fb) authenticate GSSAPI performance problem - GSSAPI_ERROR: GSSAPI failed: not enough memory is available to complete this application
The connection to the server has 12 GB of memory in total and 9.5 GB of memory free/available.
In the windows event log, the following error message appears:
BROKER_USER_AUTHFAILED_GENERAL
Failed to authenticate the user < UNAUTHENTICATED >
Attributes:
Node = hostnameofconnectionsserver.mydomain.com
Gravity = AUDIT_FAIL
Time = Mon 28 Dec 19:51:16 THIS 2015
Module = broker
UserDisplayName = < UNAUTHENTICATED >
Source = com. VMware.VDI.Broker.filters.GssapiAuthFilter
Recognized = true
Just tried from a machine arrived in the area via the Security server. Cannot open a session as the current user. We also enabled on the external connections of MFA, but I don't think that should make a difference.
Maybe you are looking for
-
My games is displayed in a small window, not full-screen.
I installed a game for learning since 1996 and when I try to play a game like Grand Theft Auto IV it is displayed in a small window like the 96 set appears. How to restore mode full screen in my games?
-
Can not turn on the same monitor if connected to the TV displays error no video signal".
Original title: barely tv cell have on my computer and the screen does not light. He lit up a bit but not on. I have connected my laptop to my tv via the vga cable. Start the computer screen turns off after startup. Start in safe mode, it works. Rest
-
MS Office 2007 Home & Student - 3 devices limited
I got MS Office 2007 Home & Student installed on 3 PCs at home. I replaced a PC that more restarts with a new laptop. Does anyone know if I can install it on the new PC, as I now only 2 facilities. They will allow me?
-
How to implement the service as thread know app without a head?
I want to implement some service such as GPS log app, SMS Firewall. I want just an expert to give some guidance on how to design app without head and how to interact without head with front UI thread?
-
Memory external drives under Windows 7
Hey Microsoft, I just got a laptop from my new employer with Windows 7 and SP1 installed. I have 3 external memory devices: Sandisk 8 GB SD card a 500 GB Iomega eGo hard drive a 1 TB drive Seagate Portable On the connection of each one to the laptop,