Graphic driver on Satellite Pro U200 (Vista Business 32 bit CZECH)

Similar Questions

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.

• Cannot install Intel graphic driver on Satellite Pro A40

  Please could someone help me.
  I download the graphics driver updates for my computer toshiba laptop. The brand drivers are INTEL a. I downloaded the drivers from the site to intel. All the requiments that are correct are correct.

  When I went to install the drivers an error message came up saying "the driver cannot be installed on this computer, please contact your computer manufacter.

  Please can someone help me.

  Thank you
  Greg

  I put t know what is the problem? Why you n t use graphics drivers on the Toshiba site?
  The graphics card drivers, manufacturers are not designed for laptops, so you can not install it.

• Need a graphic driver for Satellite Pro L10 to play Caesar IV

  I have problems with the chart to a new game (Caesar IV) element on my laptop. The game requires "hardware T & L" for 3D graphics, but the forum games tells me that computers laptops with the chipsets are not configured to run these types of games. Apparently I need a graphics card any.

  I don't understand why my (relatively) new Centrino laptop with a processor is unable to use the graphic chipset.

  Where can I find a driver for the type of chart using my game?

  Hello

  I think that the Caesar IV is a game that requires a graphics card with better performance than the Intel 855GM graphics card with 16 MB to 64 MB shared memory.

  The game asks for the graphics card with graphical support entirely in 3D and in my opinion the laptop card is not able to support these graphics to full power.

  I put t know if the driver update will help you.
  It s more case of hardware as a software issue

• No sound on my toshiba satellite pro with Vista Business OPS

  After the most recent update of Microsoft I had no audio output of the computer, not even with headphones. would it be due to a faulty update or do I need a new sound card?
  Thank you

  Hello
   

  A. did you disconnect the speakers and check it out?

  B. who is the manufacturer of your computer?

  Let us try the following methods.

  Method 1

  The link below talking about the same error message. Open the link and click the Fix It button which can fix some problems related to the sound.

  http://support.Microsoft.com/kb/948481

  If the method above doesn't, proceed to the next method.

  Method 2

  Make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  1. Click on start toreduce this includes this image, type Sound in the box start the search .
  2. Click on his research at the top of the Start menu.
  3. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:

  a. on the read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  b. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  1. Select the audio device you want the default audio device, and then click set as default.
  2. Click OK to save your settings and close the dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved. If you don't hear sound, try Method 3.

  
  

  Method 3

  Try to perform a system restore and check whether the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 4

  Uninstall display drivers and reinstall.

  1. click onpieS.

  2 type devmgmt.msc in the search box.

  3. expand game controllers and video, sound, and right-click on the driver and uninstall.

  Try to restart your computer and check, because the drivers will be automatically reloaded.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Satellite Pro U200: Display Resolution changed to 1024 x 768, after sleep (Vista)

  I have some problems with my Satellite Pro U200 (WinVista, BIOS 3.50, Display Driver 7.14.10.1217).

  After the exit mode standby, the display shows the correct resoluion of 1280 x 800 for a second and then goes to 1024 x 768. It's very annoying.

  I tried to uninstall / reinstall the display driver, but it did not help.

  Does anyone have an idea?

  Well, I remember a similar problem happened on U200 with Windows XP and Windows XP MCE.
  The update of the graphics to the version 6.14.10.4543 driver has solved this strange switching

  Maybe the next update of the graphics card driver will clear this issue

• Satellite Pro U200-104 - mass storage device driver

  Hey all,.

  I just bought a second hand U200-104 and it installs now. My OS is Windows Vista Business 64-bit & 32-bit seem to work ok. Although I installed all that he is on the page of the driver that I keep having an unidentified "Mass Storage Device" in my device list.

  In the properties, it says:
  -Location: Bus PCI 3, device 11, function 2

  I hope someone can help me!
  Thanks in advance :) a mollion

  Hey Buddy,

  > Location: 3 PCI Bus, device 11, function 2
  To be honest, this information is not useful
  You should check the vendor and device IDS in the devices in the Device Manager.

  At the present time it is difficult to tell what device it is, but you should try to install the card reader driver. Visit the Web from Toshiba for this!

• Satellite Pro U200 - Viewer is preinstalled on Vista?

  Hello

  What Image Viewer will be preinstalled on Vista professional in Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I m not Satellite Pro U200 owner but I suppose that the normal image viewer for Windows is installed.

  But I put t understand the reason for your question. You can install and uninstall what you want then doesn t be worry about it! ;)

• Get the error message when you try an upgrade to Vista on Satellite Pro U200

  Hello
  When I upgraded my Satellite Pro U200 to Vista (original CD using Toshiba), I couldn't install Config Free program. When I want to install it, I get the message 'the installation image is not corrcet' ideas for this problem?

  Thank you

  Hello

  Maybe you need to download again the configfree for your machine from here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Just download and try to install it. I can't imagine that she won´t, I ve updated work my A100 some time ago and everything works fine.
  BTW. I downloaded all the stuff from the link above.

  Please give some feedback

  Greetings

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Satellite Pro U200 - hard drive upgrade

  Hello

  I have a Satellite Pro U200-128 and you want to upgrade the hard drive. I can't find detailed specifications to show me the compatibility, drive type and therefore the size of a disc that I can buy.
  I think that its SATA, but there is a lot of info on SATAII, not sure if it will work in my model?

  Any help appreciated

  Hi ollieg72,

  You re right. Satellite Pro U200 already uses the HARD drive with SATA interface if you need a HARD SATA 2.5. In addition, it should be possible to use every ability because on SATA interface, there is no capacity limit.

  Anyway, SATAII HDD is also working because they are compatible to the old interface of SATA1 downgrade. So it makes no difference if the HDD is SATAII interface or not. ;)

• Satellite Pro U200 - need drivers HDD Protection & footprint of VISTA 64-bit

  I have toshiba Satellite Pro U200 [Greece] and I need drivers for fingerprint utility and disk protection hard can you help me? It is very important too me.

  I think that gives you about boyfriend chance seems Toshiba 64-bit tools and drivers at the moment unfortunately, nothing to see :(

• Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

  Model No.: Satellite Pro U200 PLUA1E
  OS: Vista Business SP2
  Current BIOS: v. 3.50

  Try to update the BIOS to v3.70

  When I run P0044v370, I get a Windows Script Host message:

  "Script:
  C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
  Line: 2
  Char: 1
  Error: Failed to create object named 'WScript.Shell '.
  Code: 8007007E
  "Source: WScript.CreateObject".

  I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

  I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

  Everything is - I am in your forum people good hands! Thanks in advance.

  You have what Windows OS installed.
  It is Win XP?

  Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
  The CM is on the page of the European driver Toshiba

  In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.

• Upgrade can not display drivers - Satellite Pro U200-10J

  Hi all

  I recently received a Satellite Pro U200, which I am very satisfied so far.

  My current display drivers are the 7.14.10.1147 of the 945GM Express chipset Intel. The new drivers that have been added to the drivers on the Toshiba site list 17 and are the 7.14.10.1227. Unfortunately, they install! I get a message just after the initialization of configuration that these drivers are not the most appropriate for this laptop and it closed facility. When I try to update the Device Manager, it simply tells me that I already have the latest drivers for my machine.

  Please notify; p

  Hello

  Before you start installing the new driver remove the old. You can do this in the properties of the device in Device Manager.

  I did it with my Vista preinstalled Satellite A200 (also with the Intel graphics card).

• Flash (TCrdMain.exe) error on Satellite Pro U200 card

  Hello

  I have Vista Business installed on Toshiba Satellite Pro U200
  and, in the event log, the following error message:

  Log name: Application
  Source: Application error
  Date: 20.11.2008 18:06:38
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  Application TCrdMain.exe, version 1.0.0.9, time stamp 0x458faba6, failed mscorwks.dll module, version 2.0.50727.1434, time stamp 0x4757b767, exception code 0xc0000409, offset error 0x002b832f, 0xe38, failing application start 0x01c94b322888a3c2 process id.
  The event XML:
  
  
  
  1000
  2
  100
  0 x 80000000000000
  
  11115
  Application
  Toshiba
  
  
  
  TCrdMain.exe
  1.0.0.9
  458faba6
  mscorwks.dll
  2.0.50727.1434
  4757b 767
  c0000409
  002b832f
  E38
  01c94b322888a3c2
  
  

  someone knows howto fix it or where can I download this software of Flash cards and reinstall?

  ist it this software?

  Flash Media Driver

  http://de.computers.Toshiba-Europe.com/innovation/vista_drivers.jsp?macId=&mode=userMachines&userOS= & action = search & selProduct = 656 & selOS = 26 & selType = 244 & country = 37 & language = 13 & search =